Satellite NB10t-Arelatifs victory 8.1 - limited wifi, no internet access connection

Hello

so I have Windows of Satellite NB10t-a 8.1 with qualcomm atheros adapter ar956x and im getting connection is limited message, unidentified network, no internet access despite the full bars messsage.

I have other laptops and computers that run windows 7 etc in the House connection very well.

I tried pretty much everything that any help at all would be really appreciated.

> I tried just about everything at all any help would be really appreciated
and what have you tried exactly?

Have you tried to update the driver Wlan?
Have you tested the WLan in relation to other Wlan routers?
Have you tested different channels WLan (1-11) and different standard WLan (802.11 A/B/G/N)
Did you test the connection to the WiFi which is not encrypted?

Tags: Toshiba

Similar Questions

  • Problem WIFI (no internet access)

    Hello, guys. I week ago I had a Pavilion dv4 (dv4t - 4100) with Intel 802.11b/g/n WLAN. He connected nicely to my router when tonight, he began to show "no internet access", even if the computer recognizes the router and says the signal is at 99%. I guess that a link in the process of WiFi connection was broken at a given moment. It happened between creating a new user account and maybe installing Safari browser. I'm not sure. Or it could be hardware, but nothing shows up in the analysis of troubleshooting or in Device Manager.

    To the HP Support Assistant, shows as follows:

    Microsoft Virtual WiFi Miniport Adapter connected #2-non
    Microsoft Virtual WiFi Miniport adapt - not connected
    Intel(r) WiFi Link 1000 BGN - wireless network connection
    Atheros AR851 PCI-e Gigabit Ethernet (NDIS 6.20) controller - not connected

    The HP network audit, indicates the network in my local router information, internet IP address: not available.

    I'm really confused, because I can not deal with same software that manages my WiFi connections. I found "Intel My WiFi Technology", also "HP Connection Manager" and especially WiFi connections to the taskbar. Then, we should I use and set?

    My questions are:

    (A) if I was using internet without opening 'Intel My WiFi Technology' and 'HP Connection Manager. Do I really need these software? Why are they in my book and why should I activate them?

    (B) if it is important to use one of these programs mentioned above, or both, why and how should I use if I connect to the internet without problem before? And it will restore my internet connection?

    (C) what WLAN module I have? It is said in my order Intel 802.11b/g/n WLAN. It is said in the HP Support Assistant Intel(r) WiFi Link 1000 BGN. Are they the same?

    (D) after identification of my WLAN module, where can I find a driver for it? Because one of them must not be found anywhere. I am in my second built-by-me-bench and I never had trouble to find a drive. For some reason these names I have mentioned do not exist in the list of drivers to Intel. I tried the HP site, but it's too complicated and it seems do not have this key WLAN.

    (E) at the end, how is the best way to connect to the internet and how do I configure my phone for a first and fast connection? Or I have to do anything and I just need to fix something to go back to where it was before, when I was using internet without problem and in a simple way?

    Summarize: I'd love to see a feature more late who says: "connecting dock", where all possible means of connection, WiFi and cable, can be defined in a single window, with simple and clear tutorials.

    Moreover, I like the laptop. Well done, cute, smooth and not full of blotware. I also loved access to all material, simple as a click of the fingers. This will be very handy when I replace the HD for one SSD and mix in a Blu - Ray player. But is a pain.

    Well, I really, really appreciate all responses.

    See you soon,.

    It's the software antivirus (Avast). For some reason when I created the new account, the Avast did not load the new settings and blocked the internet (don't ask me how).

    I uninstalled and tried to establish a connection and I got the same 'no internet connection' icon, but when I tried to open Safari the network is is behaved as if was the first time that I accessed internet. A WiFi window pops up, which I closed, and the internet connection has been restored. Now I'm going to reinstall Avast from scratch.

    Detective Conan.

  • WiFi disconnects internet access 10 to 15 seconds after the connection.

    I have a

    Realtek RTL8188CE 802.11b/g/n WiFi adapt

    HP Pavilion dv6t - 6 c 00 CTO Quad Edition Entertainment Notebook PC

    Windows 7-64 bit

    I try to keep in touch with the wifi of the company.  This is the only laptop that has this problem.  The work of the fine Dell and all the books of Mac work fine.  You can even, connecting the system have no problem with a strange assortment of portable, none of them HP.  I wonder why?.  The built-in Wifi does not worth a darn.  I could manually disable and connect a cisco usb wifi adapter and connect and stay connected throughout the day.  Why my build in wifi usually stay connected.  I downloaded who knows how many different drivers trying to make this thing work.  I hate having the USB that comes out when the laptop when I should have good working wifi connection built in.  I downloaded the HP Wizard and it says the drivers are up-to-date.  That am I missing other than HP put a sucky wifi card in my new laptop 1800 dollar?

    I read on a thread somewhere on this problem and I'm not. I think it was in reference to the Realtek adapter.

    The person said to go into the advanced settings (click on the device in Device Manager > Advanced tab) and change one of the settings listed in b/g/n and b/g.

    If there is no such parameter, try to change the channel on the router to 1 or 11 and see if that helps. Maybe you get interference on the channel that you use and this particular card is sensitive.

    Paul

  • 'Limited' WRT1900AC (no internet access)

    A little help please...  I am replacing an old EA2500 with WRT1900AC to get the best range wireless.  I did maybe wireless router configurations 2 or 3 dozens of times in the course of the years starting with the units very frist B, always manual, never had a problem.  But this thing... arrrrggghh!

    No problem doing a manual configuration to duplicate (SSID) wireless configuration with the exception of the old router.  Wireless signal strength is excellent for all devices, but none has internet connectivity.  If I go to the admin-troubleshooting-internet router address it is empty, as is the release and renew button.  It's on a MediaCom cable system.  I plug the router old back in and it works fine as before. Tried several times, reset and reconencting all, no joy.  * beep * happens?

    OK, solved... in some sort this device has been set to PPPOE on default instead of Auto-DHCP by default?  Very strange.  Now works fine... :-)

  • Internet access / connectivity - Windows 7 Enterprise limited

    I have a very strange phenomenal using Windows 7. My router has WPA/WPA2, TKIP/AES security settings and other devices are able to connect to it. However, my HP EliteBook P221, running Windows 7 laptop is not able to connect to the wireless network. It prompts for the password that I entered correctly and after that it shows the message "Windows cannot connect to xxxx". If I disable the security settings in my router, the laptop has no problem connecting to the wireless network. Can anyone help?

    Hello

    Thanks for posting your query in Microsoft Community.

    Since the machine is Windows 7 Enterprise edition, I'd recommend posting your question in the TechNet forum since your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

    Please post your question in the TechNet Forums.

  • Satellite NB10t - A - limited in Windows 10 connectivity

    Hello everyone!

    I have a Toshiba Satellite NB10t-A with win10 (update) installed.

    Everything worked fine, but a few days ago all of a sudden I lost all internet connectivity. No wifi and lan. I received a message saying "limited" and "no internet".

    I tried a few problems of forums but I can't do the internet works. The problem is not with the drivers, because that when I ping to an ip address, all packets are sent and received very well. When I ping by using the cable and the wifi works well. He's also getting an appropriate local ip address, netmaks, etc.

    I also see the local network computers. Other devices on the network connect correctly (win pc, linux and cellulars)

    But I can't access the web. Cannot connect network services like dropbox, ondrive, firefox, etc and do not work.

    Another problem is that I can't access internet from my laptop to update the drivers.

    I also try to use a usb-wifi, but I get without success.

    I don't know what to do. Anyone?

    Thank you!

    Finally, I found the problem:

    Avast antivirus installed an update and it hangs with the system. The result was it blocked all connections. Finally I've desinstalled avast and now the system connects to the web without any problem.

    Thank you all anyway.

  • Satellite NB10t-A02C supports wifi Atheros AR9565 chipset

    Hey guys,.

    I'm looking at buying a new NB10t-A02C mainly to work on Linux (Debian). I was hoping someone could confirm that this particular model uses wifi Atheros AR9565 chipset. Apparently, some use an Intel wifi chipset but I can't confirm one way or the other regarding this model of the Australian market.

    Thank you very much for your time & help.

    Mez

    Is the complete model of the Satellite NB10t-A02C number: PU141A-02C03V
    Google gives a few hits about this model of Toshiba Satellite NB10t and it seems that this unit was equipped with the module WiFi Atheros (not Intel).

  • Satellite Pro NB10 limited wifi connection

    I use Satellite NB10 Pro with version 1.20 of the BIOS and windows 64-bit of 8.1. I have trouble with several times the limited wifi connection. When I remove the driver and reinstall it, it works again. Pilot already updated, but keeps same problem. Tried several Satellite Pro NB10 same problem. Any suggestions?

    For most of the WLan connectivity issues are related to the IP attribute the problems.
    Usually the IP address is assigned automatically using DHCP service.

    In case this question would appear once again, you can try to refresh the IP address.
    Start the console (black DOS window) using the command: CMD (type CMD in search)
    Then use the command: ipconfig / renew

    If this question would never happen again, I recommend you to reset the WLan router.

  • Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

    Hello

    I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
    I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

    I am aware of
    http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
    The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

    I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
    Clearing keys does not work too.

    I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
    What can I do?

    Edit: will put some pictures of the uefi

    You posted the screenshots of the configuration of Toshiba utility.
    The boot mode must be changed in the BIOS settings.

    To access the BIOS of the laptop must be turned off.
    Then put the unit BUTTON and press F2 to enter the BIOS.

    In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

  • Satellite NB10T-to-10F - webcam suddenly stopped working

    Hello
    I got the laptop TOSHIBA SATELLITE NB10T-A-10F
    The web cam has suddenly stopped working
    I tried
    Updated bios even without result
    Here is the picture of Device Manager

    In various cases, the webcam can be enabled and disabled in the BIOS
    This option would typically appear in the BIOS under: Advanced-> System Configuration
    Please check this box.

    Otherwise, you need to know also that the webcam driver installation isn't necessary if you use the system Win 8 or 8.1 win because such driver is already part of the system.

    If the BIOS does not have the power option webcam (Advanced-> System Configuration) I would recommend you to retrieve the computer laptop back to the factory to check settings if possible hardware malfunction would be responsible for this issue.

  • Replacing the battery for Satellite NB10T-A-103

    Hi all

    Y at - there no replacement battery (compatible maybe?) with a higher capacity (> 2100mAh) for the computer portable satellite nb10t-a-103? the original battery only works for 2 hours.

    Thank you.

    Unfortunately, I found only a single compatible battery for your laptop model and it's battery with the PA5170U-1BRS part number.

    To be honest, 2 hours on power battery isn't so bad. If you want to use a little longer power profile change advanced power settings.

  • Satellite NB10T-A-101 - mouse pad does not work

    I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

    But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

    I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
    Any suggestions would be greatly appreciated
    Thank you

    Hello

    Have Hmm you also checked the FN + F5 key combination?
    This would enable and disable the touchpad as well.

    But from my point of view, it would be possible that the touchpad module is malfunctioning.
    I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

    Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

  • Re: Satellite NB10T-A-101 - cannot boot from USB key

    Hello

    I bought a new Toshiba Satellite NB10T-A-101 and want to improve performance by changing the HDD with a SSD and install windows Pro 8.1.

    However, I am unable to boot from USB, it always mention:
    + Reboot and select proper boot device or insert boot media in selected boot device and press a key. +

    I already disabled secure, used 5 + usb startup different sticks (work fine on other laptops).

    Can you please tell me what the approach is to change the HARD drive and then boot from a USB bootable (UEFI).

    Thank you.

    Hello

    Laptop Satellite NB10T-A-101 was equipped with an Intel CPU 2810 n which is part of the new Intel Bay Trail-M platform.

    This new technology Intel Bay Trail allows installation of UEFI capable systems:
    Win 8 or 8.1 Win

    Just a few questions:
    Have you already changed the HARD drive to SSD drive?
    If so, the new SSD is recognized in the BIOS?
    Have you tried to boot from the USB flash memory stick 8.1 Win until you changed your SSD drive?

  • Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

    I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

    (1) turning off SecureBoot (which I did)
    (2) putting USB at the top of the list of starting the computer.

    But it does not work.

    I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

    Hello

    Great that you are using Linux on your PC!

    You mention that you have disabled the secure boot.
    It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

    Most of the distros must support UEFI but that can't be true for each of them.
    If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
    If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

    Another clue could be to take the USB key and try to start another PC from him.
    Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

    If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

    I hope this helps!

    Tom BR

  • Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

    Hello world

    Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

    I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

    I boot on my USB (made with RUFUS), but it works once for each five times.

    After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

    How to install Ubuntu?

    Hello

    This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

    The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

Maybe you are looking for