Satellite P 300 - Document file corrupted / unreadalbe

Similar Questions

• Satellite Pro 300 PSAJ1E - low volume

  Hello.

  I have a Satellite Pro 300 PSAJ1E at work, the sound is very low when played from the computer laptop speakers and also when the headset is connected.

  I have the latest audio driver and volume controls all are turned towards the top (Yes, even the small wheel in front!).

  Any help appreciated.

  Thank you

  Hi ericw400,

  What player you use to listen to music or watch videos? I advise to use the freeware media player VLC Player that can play almost all audio and video files for other players are no longer needed. Just Google a bit to find this tool.

  In VLC media player, you can also change the volume so I recommend this test tool.

• Satellite M40-300: is it possible to make a CD or a DVD for all facilities?

  Hello

  I bought a Satellite M40-300, it's a very good laptop
  I just have two questions:
  is it possible to make a CD or DVD for all facilities
  because I have two partitions. One for the window
  and the other for a linux?

  For Linux I want to install Red Hat Fedora Core 4 all devices are compatible or not? and where I can get driver for this?

  Thank you very much

  PS: Sorry for my English I'm French.

  Hello

  First of all there is no drivers for Linux because Toshiba doesn t supports the Linux operating system. All Toshiba units are shipped with the Microsoft Windows operating system.
  I also work with Linux, but I use a different distribution. I use Knoppix because I n t need to install anything whatsoever on the HARD drive and I can use this Linux as other Linux distributions.

  On a CD/DVD creation: do you know that Symantec Ghost?
  This tool allows to create an image file or a CD/DVD image you OS. I don't know if it works with Linux, but as I suggested, you can use a Knoppix ;) m

  Hoppe these tips will help you make a decision.

  Good bye

• going up the document file and the content when Windows 10 ranking

  I was not able to open a document file on another system 10 windows 7 window by using a flash drive, adaptation of the file of documents in windows 7, then try to open it on another computer using windows 10. I will be able to open these documents on the computer I want to upgrade to windows 10

  You should not have problems if the flash drive is not corrupted and is formatted in ntfs and fat32 not as is the default value of devices.

  M$ has a new offer that might be interesting to look into

  https://www.Microsoft.com/en-us/store/locations/Windows-10-upgrade-challenge?WA=wsignin1.0

• To recognize the file corrupted by using the API of framemaker framemaker

  If I rename a book of framemaker as file FM and then I try to include this file as one component of another book, no pdf is generated during the recording of the book in pdf.

  How can I be sure that a book file is not added as a component using the framemaker API (currently using fdk 6.0).

  Thank you

  ASHA Rayakar

  ASHA,

  I think I understand now. Someone renamed the file... you just try to catch the error in your code, right?

  I tried to reproduce this scenario, but in my experiences, FrameMaker was smart enough to know what type of file it was, regardless of the extension. So, here are just a few ideas...

  -If the file is not actually "corrupt", you can use F_ApiGetObjectType() to find out if it is a FO_Book, FO_Doc or something else. If a document is corrupt, I don't know what this function may return.

  -If the file is corrupt, I think you should be able to ask a sort of property that. For example, perhaps you could count the number of paragraph formats in the file. My guess is that a corrupted document will have far fewer that you expect to see, or not at all.

  Russ

• TextEdit files corrupt

  New Mac Pro cylinder, Yosemite. When I open edit text and start typing, very often what I get on screen is a string of dollar signs. If I open an existing file, which may include the formatting - font sizes, colors, pasted in pictures - he often opens as single row after row of dollar signs. Or older paragraphs may be dollar signs, most recent may appear as in the format. Or vice versa. If I command-shift-T to remove the formatting, plain text is all there without foreign characters.

  If I open a file corrupted on my old Mac Pro Tour (OSX 10.7 I think) the file is fine.

  Someone at - it see something like this before? I use Linotype Font Explorer X on both machines without any problem, do not know if who is involved? But in general all who help the police by default TextEdit chooses.

  Is there a way to clean-install TextEdit only? I liked TE years to keep project notes and record things like revenue, the procedures of the darkroom, things of type Notepad. Never had a single problem this machine.

  Is there a way to clean-install TextEdit only?

  N °

  Go to the Applications folder > fonts Book.app

  FontBook > file >restore to the Unicode Standard

  
  

  There maybe something similar to Linotype do explore X if it is the substitution of your police Book.app

  
  

  There also may be an updated version of your Linotype Font Explorer X
  

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Playing discs DVD + RW on Satellite S1700-300

  Can I use my Satellite S1700-300 me running to read that DVD + RW burned on a XP PC with a Pioneer DVR - 106D DVD burner?

  The reader Toshiba says that the disc is not recognized.

  If this isn't the case, it would be OK if I burned the DVD - RW discs?

  Hello!

  Yes, you can! Normally, there should no problems with serious DVD. But as far as I am aware that there may be problems with the DVD + R DVD + R more recent than your machine symbolic because. So I think that it is better to burn DVD-r!

  Also, you should test different suppliers because some DVD vendors produce their DVD as the industry standard!

  Good luck!
  Rudi

• Cannot open .mov file corrupt - error 2048 format not supported

  Hi all

  I have an important file corrupt and I tried every way I can think to open, but to no avail...

  When I open it with Quicktime, a ' 2048 unsupported format ' error, even if the other videos I made are very good.
  I can't open this video with software like VLC and friends (believe me, I tried LOADS of them)...

  After doing a LOT of research I understand that neither the part header and closing of the file is messed up.
  Is anyone able to teach me how to fix these pieces?
  I am really at my wits end and I am a beginner just to hex-editing @. @ better still, if you are able to take a look at this video for me...

  I'll be very happy if someone can help me on what I really want to get the video, it's for an important friend, thanks in advance!

  PS the video is about 120 MB

  Hello

  I m using the tool called SUPER.
  It of free and you can convert any file format to any other format file
  It may be possible to convert its defective file in another format and ten you can try to open it again using VLC player or other application.

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Satellite A300/300 d frozen, can't do anything

  I'm on a Toshiba Satellite A300/300 d and just used a DVD burner external for the first time with the laptop, everything was beautiful disc burned successfully but when I took off the drive and went too open internet page the laptop I couldn't do anything.
  Keys power button, mouse pads on nothing happens. Everything froze.

  Help, please!
  Can't even turn it off.

  Just press start button / stop and keep it pressed for a few seconds. This will force the cell to stop.
  Press it again, and then start the laptop. I hope that you can use again.

  Method described by vmanto will not end with the loss of everything on the HARD drive. It has nothing to do with the data saved on the HARD drive, but you will lose all data stored in RAM at the moment.

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• How can I recover my old data settings document files firefox bookmarks and favorites of ie8.

  I need to reinstall windows xp sp2 I turned off my pc by updating the os now I ask a question after the reinstallation of the sp2 would be it possible to recover my old data settings firefox favorites bookmarks of ie8 and norton antivirus 360 documents.

  You might see if this folder is located on your computer.  Depending on how you installed Windows, it could be an old version of some files in pre-installation.

  C:\Windows.Old\

  But beyond that, there's no other place I could think that perhaps it would be after a reinstallation.

  Shameless plug for the new version:
  If you used Windows 8, all of your documents, files, Favorites, bookmarks are saved on your Microsoft Account so that you can use them even if you get a new computer (or reinstall an old one).

• Download XPsp3 error 'file corrupted '.

  I ran "SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?

  It is reported that security software can inhibit successful installation of SP3. See...

  http://support.microsoft.com/kb/949377?

  Rather that to disable security software, uninstall may be a better choice because some 'disables' is not fully turns off. You already have the SP3 download then try this...

  • Make sure that you have the ability to re - install the security software (re - download or find installers, find a CD etc - also, to study the procedures for this with your provider support pages)
  • Disconnect from the internet
  • Uninstall your security software
  • Install SP3
  • Re-install security software
  • To connect to the internet and do Windows updates and software updates for security

  If you can't count on the possibility of re - install a security software for a reason any then just go with the neutralization of him while applying a SP3.

  You can also read this...

  http://support.Microsoft.com/kb/950717

  Tricky

• I have a file corrupted on my windows xp Hyperthreaded system. the file is c:\Windows\System32\svchost.exe. is there a way I can get this to work without a windows dump

  the title tells the whole story

  Hello

  1. how assume you that the files are corrupt?

  2 are you facing problems on your computer?

  I suggest you to try the steps below and check if it helps.

  SFC [SFC system] scanner on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.