Satellite P10-792/833: what is the chipset? IMPORTANT!

Hello everyone,
In order to successfully install Windows 2000 on a Toshiba Satellite P10 792, I need to know which is the chipset of the motherboard.

It is impossible to find information about it on the Web, and Toshiba is VERY inefficent: is it possible that Toshiba sells laptop without specifying the specifications?

Please answer me what chipset is installed in the notebook; IT IS NOT AN INTEL CHIPSET!

Hi dieresi,.

I found some technical characteristics of your SAtellite P10 792. Visit this link:

http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/product_page.jsp?service=EU&PRODUCT_ID=85872&Toshi baShop = reseller

Tags: Toshiba

Similar Questions

  • Satellite P10 792 won't boot to the top

    Worked fine before, now won't start upward.
    I can not only see the TOSHIBA Logo no Bios, because the cooler clean cpu fan & I remove my Satellite P10 792 RAM without removing the battery.

    When I try to boot my laptop all I get is the blue power light coming on and the fan turns on 4 or 5 seconds and then nothing

    I tried remove the battery CMOS, will not always to start!
    Note: I'm living in eastern Libya, TOSHIBA ASP 800 km from me

    Best regards
    Fredj a.j.

    Check the voltage of the AC adapter, if his less than 19volts gift, it could be defective.

    Otherwise, it looks like he needs a new mainboard. You might be able to find one on eBay.

  • Satellite P10 792: help me with da Video Card

    I have a Toshiba Satellite P10 792, and every time I watch a DVD or play a 3D game, my laptop stops after 10 minutes or less.

    any advice?

    Hello

    If this happened recently is here something you don't l l tell us? ;)

    Gumati in my opinion, it may be a battery fault. Please call the Service partner and ask them what may be the cause.

  • Satellite P10 792 drivers OR recovery disk

    I bought a Toshiba laptop from the United Arab Emirates, model * Satellite P10 792 * in 2004 and had no problems with it until I decided to format in Turkey/Istanbul where I live now. I format and now the distributor of TOSHIBA in Turkey can not yet find the * drivers or the recovery disk * for me because they say it is a too old model! Why sell something if you run it in 5 years? I had no problem with the laptop my only mistake was to format thinking that it would make my computer!

    I desperately * need help from someone who can help me to find the GOLD recovery disc download drivers * for this model of laptop SATELLITE P10 792. Please help me. I don't want to throw my computer in the trash, it is with me since 2004, and I knew it would last me five years if I wanted to format :(

    Thanks in advance for any answers.

    Hello

    I don't understand why you're so angry. Visit the Toshiba download page and download all the drivers for Windows XP Home edition. If I remember well this laptop model is listed under the option ARCHIVE (type of product).

    Check it out.

  • Satellite P10-792 RAM compatibility (Nanya)

    Hello

    Nanya RAM (PC2700, CL2, 5) is compatible with the Toshiba Satellite P10 792?

    Greetings

    Hello

    Yes, this RAM Nanya would fit 100% into this P10, because the machine is supported by the modules of PC2100/PC2700 RAM memory up to 1 GB per slot.

    So feel free to insert this module without worry. ;)

    Welcome them

  • Satellite P10 792, SD driver on w2k installation problems

    I just installed windows 2000 on my P10 792. I downloaded the driver for the SD card in support page for w2k and I can't install it. He refuses to be installed in any case. If I have the strength to install manually, then I reboot I get a blue screen with a kernel error, reset recommendation and a device install driver problem. Only in safe mode, I can start and uninstall it! Could someone help me? Thank you! Flavius.

    Hi Flavius,

    order in which installed the driver?

    I installed on my Windows 2000, SP4 in a first time driver "SD host controller", following the "memory SD card."

    Good bye

  • What is the most important difference between 3D Picture control and controlling the display of Simulator

    I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

    Hi sfh1,

    You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

    More in depth on these options and the display of control Simulator can be found here:

    http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

    If you would like more information on the picture here 3D control is another resource:

    http://www.NI.com/white-paper/3170/en/#toc2

    Kind regards

  • Satellite P10 - Windows XP (SP3) and the use of the library

    My Satellite P10 is vintage 2003 and Windows Media Center onboard.
    Recently, when you try to log in to use the new possibilities of TV capture which are installed in line I was in charge I needed to upgrade to Windows Media Player 11 (or higher) to be able to watch these TV programs.

    After you download WM11 and try to load, I get the error message "you have Windows Media Center 2005 or later version to run WM11.

    Someone else I have a problem and can I do (apart from dumping my P10 and purchase of a Mac (which is what my son told me to do!).)

    Hello

    Depending on your message, your laptop uses Windows Win XP MCE
    Looks like you are using the old version which is 2003

    The providing of WMP11 error message says that you need the most recent version; 2005.

    I think you simply update the Windows media Center.

    For this, you can see this Microsoft Web site: http://www.microsoft.com/windowsxp/downloads/updates/mediacenter.msp

    Greetings

  • Satellite A30-151 PSA33E - cannot install the chipset driver

    Hello

    I have Toshiba Satellite A30-151 PSA33E-72KX3-EN.
    I recently Reinstalled Windows XP.

    The chipset driver that I downloaded from the web site, does not work.
    file: http://support1.toshiba-tro.de/tedd-files2/0/csutil-20080320162841.zip

    The message is: Intel... requires a platform chipset soustenans running on a supported operating system.

    What should do?

    Hello

    The message appears because;
    (1) the chipset driver is not compatible with the chipset
    (2) or the chipset driver is not compatible with the operating system

    It seems that this point 1) is correct.
    As much as I know Satellite A30-151 PSA33E-72KX3-EN supports the ATI graphics chip. Right?
    My knowledge this old model of laptop Satellite A30 escaped with graphics chip ATI or Intel graphics chip.
    Maybe the chipset driver is only compatible with laptops with an Intel GPU.

    However, you can install a diagnostic tool for material like Everest Home Edition.
    This will show you the chipset of s for laptop and you can download the Intel chipset driver from the Intel page.

    PS: Make sure that Win XP is up to date!

  • Satellite P10 - 792 lock ups / crashes and battery

    I used my P10 792 even since I bought it 3 years ago. S there was a decreasing battery box that appears on my screen (sometimes) say I should replace the badly inserted battery and restart my computer. If there is also a problem mouse touch pad. He touchpad doesn't respond well to orders while he was trying to move the pointer.

    The battery alarm message usually comes with the dysfunction of the touchpad. I have to press ESC to restore the touchpad back to normality and close the application of process Btrychkr.exe under the menu CTRL + ALT + DELETE to make the gibbous Moon box to disappear.

    But the main and most recently problem are blockages, especially when running programs that require a video grand advanced such as 3D games and DVDs. The screen freezes for several seconds, and then he comes back to life. This is sometimes followed by a sudden stop down.

    Finally, when I try to turn it on, it doesn't even get to loading windows before it stops again, and so on. So I have to wait several minutes before pushing on the button again. Now, we have reached a critical situation where the computer won t last more than 10 minutes before its shutdown automatically without notice. There is no error message so I don't see what is the cause of the problem. (Battery? Overheating?)

    It is also important to note that one of my friends with a series of P10 also had these same problems and finally had to buy a new one because the laptop has been just the hand. I fear me comes with the same situation of m.

    How can I solve this problem?
    I would really appreciate the help.
    Thank you

    Hello

    You you use laptop for 3 years. You replace the battery during this 3 years?
    Isn't it? I think it would be a good idea to replace the battery.
    Usually after about 500 times of loading and unloading procedures the performance of the battery goes down and the life time decreases

    Additional during those 3 years, the laptop needs to be cleaned. Fans suck dirt and dust and sometimes cooling modules cannot turn with maximum performance and can not cool the CPU and other devices.
    Of course, the overheating could be a reason for your shutdown problems

    Looks like you haven t much experience so I think someone with more experience (technician) is recommended to clean the notebooks cooling modules

  • Satellite P10 - 792 HDD size instead of 60 GB 27 GB?

    Just unpacked and spent last week, install my P10-792 and now (...) I noticed that the C drive is only 27 GB while the drive itself is about 60 GB. There is a volume without the name of about the same size (27 GB).
    In the FAQ, I found a cure for the resizing partitions using the restore CD, but it probably means reinstalling all over the entire machine.
    Please help me. I would use all of the disk and not just half of it.

    Thank you, Stephan

    Hi Stephan,

    information to your new Latop, beautiful machine! :-)

    I think you have the factory installed OS on the machine and you might see in Solution Explorer that the C partition is ony 27 GB and space without a name like unformated?

    There are 2 solutions

    1. If you like partitioning with 2 x 27 GB you can click on the unpartitioned space and format it with the right mouse click-format. Then you have a "C" and "D" partition on your laptop

    2. the alternatives, it is that you want another partition, you must use the Toshiba Recovery CD and do a reinstall with the Expert Mode. There you can set the size and the number of partitions.
    or you install 3rd party software like Partition Magic and set up the partitions on a running windows system!

    Tip: There is a 60GB HDD built in, but you have only two partitions of 27 GB on your PC. The result of this is that not 54 GB but 60 GB are built. It is a property of Windows, a gigabyte, 1024 megabytes.

    Bye Bob

  • Satellite P10 792 impossible to install Modem

    Hello

    I installed Windows XP Professional with Service Pack 2 on my P10 792 instead of the Home edition standard. I downloaded all the latest drivers and everything has been recognized and works very well except for my modem. I see the "PCI modem" in the list of devices, in other devices marked with an exclamation point.

    I tried to uninstall and reinstall but nothing helped. The Dungeon of modem appearing with the exclamation point. The modem does not appear in the phone and Modem settings in the control panel...

    I have an English version of XP. I tried the version Dutch and English of the latest version of the driver found on the internet - sm3111811h04.

    Can someone help me with this?

    Thank you
    Philippe

    Hi keiberg,.

    If you perform a reinstallation always use your CD of tools & utilities Toshiba. Normally the same drivers as you can find on the internet. I don't know that it was your mistake.

    All the drivers on the internet are updated regularly and I can't imagine for me that there is something wrong.

    Good day.

  • Satellite C660-1JH - need to reinstall the Chipset driver

    I have a Satellite C660-1JH need a reinstallation of the chipset.
    Someone knows how to do this please?

    Hello

    The laptop supports Mobile Intel GL40 Express Chipset
    The software can be downloaded directly from the page of Intel:

    19562 http://Downloadcenter.Intel.com/Detail_Desc.aspx?lang=eng&changeLang=true&DwnldId=

    Welcome them

  • Satellite P10 804: how to remove the HARD drive?

    I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

    Does anyone have the details on how to do?

    Hello

    To my knowledge, the HARD drive must be placed under the optical dirve.
    To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

    1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
    2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
    3. remove the four silver screws that attach the HARD drive to the HARD disk case.

    But be careful. If you have no experience ask someone with more experience in these replacements.

  • Satellite U300 - 14K (PSU30E) - what is the WLAN and other materials?

    What is the HW wlan in the machine? Machine pre-installed Vista (32 bit). The data sheet does not specify the HW very well.

    Device Manager says PRO/wireless 3945ABG Golan [HEIGHTS], but the download wlan driver has no driver for it. Ago realtec drivers atheros and intel, but the page intel does not list U300. Toshiba wlan page has the driver.

    There was also a network interface "isatap" (pilot: tunnel.sys).
    What is c? It did not work.

    How about the battery Bluetooth?
    The more pages of Bluetooth (http://aps2.toshiba-tro.de/bluetooth/index.php?page=download) has some drivers. Is the new one (6.40.02) the right one?

    It also has Phoenix Trusted Core BIOS. Is it possible to go further in the BIOS settings, such as enabling/disabling HW?
    Now it is mainly the password and setting of start command interface.

    Hello

    You are right. Wireless laptop card is 3945ABG Intel Intel (Golan Heights) and the driver can be downloaded from http://aps2.toshiba-tro.de/wlan/?page=downloads
    I can see version 12.2.0.11.3 is available for download.
    Driver free download driver for Vista and with exe files extract it to a folder. Look later check this file and go to the Vista32Drv folder.

    Drivers are there and install them manually with WLAN Properties > install new drivers.
    This method works?

    So what about BT? The latest version is the most recent and you can install it on your laptop satellite.

    What you want to do with the BIOS settings exactly? some certain hardware components can also be disabled in Device Manager.

Maybe you are looking for