Satellite P10 - 792 lock ups / crashes and battery

Similar Questions

• Satellite P10 792 won't boot to the top

  Worked fine before, now won't start upward.
  I can not only see the TOSHIBA Logo no Bios, because the cooler clean cpu fan & I remove my Satellite P10 792 RAM without removing the battery.

  When I try to boot my laptop all I get is the blue power light coming on and the fan turns on 4 or 5 seconds and then nothing

  I tried remove the battery CMOS, will not always to start!
  Note: I'm living in eastern Libya, TOSHIBA ASP 800 km from me

  Best regards
  Fredj a.j.

  Check the voltage of the AC adapter, if his less than 19volts gift, it could be defective.

  Otherwise, it looks like he needs a new mainboard. You might be able to find one on eBay.

• Satellite P10 792: help me with da Video Card

  I have a Toshiba Satellite P10 792, and every time I watch a DVD or play a 3D game, my laptop stops after 10 minutes or less.

  any advice?

  Hello

  If this happened recently is here something you don't l l tell us? ;)

  Gumati in my opinion, it may be a battery fault. Please call the Service partner and ask them what may be the cause.

• Satellite P10-792/833: what is the chipset? IMPORTANT!

  Hello everyone,
  In order to successfully install Windows 2000 on a Toshiba Satellite P10 792, I need to know which is the chipset of the motherboard.

  It is impossible to find information about it on the Web, and Toshiba is VERY inefficent: is it possible that Toshiba sells laptop without specifying the specifications?

  Please answer me what chipset is installed in the notebook; IT IS NOT AN INTEL CHIPSET!

  Hi dieresi,.

  I found some technical characteristics of your SAtellite P10 792. Visit this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/product_page.jsp?service=EU&PRODUCT_ID=85872&Toshi baShop = reseller

• Satellite P10 792 drivers OR recovery disk

  I bought a Toshiba laptop from the United Arab Emirates, model * Satellite P10 792 * in 2004 and had no problems with it until I decided to format in Turkey/Istanbul where I live now. I format and now the distributor of TOSHIBA in Turkey can not yet find the * drivers or the recovery disk * for me because they say it is a too old model! Why sell something if you run it in 5 years? I had no problem with the laptop my only mistake was to format thinking that it would make my computer!

  I desperately * need help from someone who can help me to find the GOLD recovery disc download drivers * for this model of laptop SATELLITE P10 792. Please help me. I don't want to throw my computer in the trash, it is with me since 2004, and I knew it would last me five years if I wanted to format :(

  Thanks in advance for any answers.

  Hello

  I don't understand why you're so angry. Visit the Toshiba download page and download all the drivers for Windows XP Home edition. If I remember well this laptop model is listed under the option ARCHIVE (type of product).

  Check it out.

• Satellite M50-226 - HARD drive crashed and I need a new

  Hello

  the 100 GB HDD in my Toshiba Satellite M 50-226 has crashed and I need a new. Can someone tell me if I need a SATA IDE oder?

  SN: 26234084 K

  Best regards
  Harry

  Hello

  According to this document:

  http://cdgenp01.CSD.Toshiba.com/content/product/pdf_files/detailed_specs/satellite_M50-S5181TD.PDF

  * Hard drive *.

  Choice of: 40 GB (5400 RPM), 60 GB (5400 RPM), 80 GB
  (5400 RPM), or 100 GB (5400 RPM); * Hard Enhanced IDE (ATA-6) *.
  hard drive; height 9.5 mm; removable user

  So it seems, you need Ide, one

• Satellite P10-792 RAM compatibility (Nanya)

  Hello

  Nanya RAM (PC2700, CL2, 5) is compatible with the Toshiba Satellite P10 792?

  Greetings

  Hello

  Yes, this RAM Nanya would fit 100% into this P10, because the machine is supported by the modules of PC2100/PC2700 RAM memory up to 1 GB per slot.

  So feel free to insert this module without worry. ;)

  Welcome them

• Satellite P10 - 792 HDD size instead of 60 GB 27 GB?

  Just unpacked and spent last week, install my P10-792 and now (...) I noticed that the C drive is only 27 GB while the drive itself is about 60 GB. There is a volume without the name of about the same size (27 GB).
  In the FAQ, I found a cure for the resizing partitions using the restore CD, but it probably means reinstalling all over the entire machine.
  Please help me. I would use all of the disk and not just half of it.

  Thank you, Stephan

  Hi Stephan,

  information to your new Latop, beautiful machine! :-)

  I think you have the factory installed OS on the machine and you might see in Solution Explorer that the C partition is ony 27 GB and space without a name like unformated?

  There are 2 solutions

  1. If you like partitioning with 2 x 27 GB you can click on the unpartitioned space and format it with the right mouse click-format. Then you have a "C" and "D" partition on your laptop

  2. the alternatives, it is that you want another partition, you must use the Toshiba Recovery CD and do a reinstall with the Expert Mode. There you can set the size and the number of partitions.
  or you install 3rd party software like Partition Magic and set up the partitions on a running windows system!

  Tip: There is a 60GB HDD built in, but you have only two partitions of 27 GB on your PC. The result of this is that not 54 GB but 60 GB are built. It is a property of Windows, a gigabyte, 1024 megabytes.

  Bye Bob

• Satellite P10 792, SD driver on w2k installation problems

  I just installed windows 2000 on my P10 792. I downloaded the driver for the SD card in support page for w2k and I can't install it. He refuses to be installed in any case. If I have the strength to install manually, then I reboot I get a blue screen with a kernel error, reset recommendation and a device install driver problem. Only in safe mode, I can start and uninstall it! Could someone help me? Thank you! Flavius.

  Hi Flavius,

  order in which installed the driver?

  I installed on my Windows 2000, SP4 in a first time driver "SD host controller", following the "memory SD card."

  Good bye

• Satellite P10 792 impossible to install Modem

  Hello

  I installed Windows XP Professional with Service Pack 2 on my P10 792 instead of the Home edition standard. I downloaded all the latest drivers and everything has been recognized and works very well except for my modem. I see the "PCI modem" in the list of devices, in other devices marked with an exclamation point.

  I tried to uninstall and reinstall but nothing helped. The Dungeon of modem appearing with the exclamation point. The modem does not appear in the phone and Modem settings in the control panel...

  I have an English version of XP. I tried the version Dutch and English of the latest version of the driver found on the internet - sm3111811h04.

  Can someone help me with this?

  Thank you
  Philippe

  Hi keiberg,.

  If you perform a reinstallation always use your CD of tools & utilities Toshiba. Normally the same drivers as you can find on the internet. I don't know that it was your mistake.

  All the drivers on the internet are updated regularly and I can't imagine for me that there is something wrong.

  Good day.

• Satellite P10-304: the problem writing and erasing CD - RW discs

  Some need help pls. I own a Toshiba satellite P10-304 with a combo player SD-R2412 installed. When I try to burn a new CD - RW, it does ok, but wouldn't allow no other written on the same CD in another session. The written CD - RW is then recognized as a CD-ROM. In addition, it is not possible to erase the cd - rw usinig this player. When I take the cd written for my laptop office of deletion, as it's done with success and my toshiba can then burn again. Any ideas on what to do?

  Additional information: laptop computer came bundled with "drag n dro cd" but I had to install Roxio and even tried the cd writing software provided with windows XP are done everything to nothing. I checked the 'advanced system info-error log' and the report there is 'the device, \Device\CdRom0, has a bad block'; I don't know what that means.

  Cheers.

  Nthunderbolt

  Hello

  In my opinion, it's probably caused by software. In my opinion, you should remove all burning software and verify all burning functions with windows option. After deleting some software, it can happen that, in the registry editor it is a lot of waste that will not be removed completely.

  In any case, delete all the burning software, and you can also try to remove the device from Device Manager DVD. Restart the laptop and DVD should be detected and installed correctly. Try using the option of engraving of Windows and if there is still problem writing once again please.

• Satellite P10 824: card reader SD and IrDA doesn't work

  I have a tosiba Satellite P10 824 a I don't know why I can use Infra red and sd card reader.
  I installed the driver but I do not have nor why I can use.
  When an sd card I can't and I can't send anything via infra red.

  Hello

  Check the Device Manager.
  Are the mentioned devices properly recognized in Device Manager or there is some yellow exclamation points?
  How did you install the operating system? Train the Toshiba Recovery CD or manually? This issue has been published since the first day, or you have installed any 3rd party applications?

  As you can see there are a lot of questions because no one knows what you have done on your laptop. In my opinion the damaged registry entries might be a reason for these issues.

  I think that you should try to remove the SD card reader and Irda device after the Restart Manager again you should auto search devices.
  The drivers have to update and it should be possible to use the devices.

• Satellite P10 804 is over heating and cutting

  My Satellite P10-0804 seems to be stopping down to often cause of overheating.

  I guess that there is a thermostat to control it.

  Is there away that I can fix this, without sending the unit?

  Changing the setting in the "Toshiba Power Management Utility" can improve things? With that, I don't see much possibility to change settings if the unit is plugged into current alternative.

  -In the "Advanced" tab, there is a selection for the "method Colling", default value 'Max Performance Mode' which is the best choice or can it be changed to 'Mid Performance Mode' or 'silent '?

  Hello

  No, you should not change some settings powersaver. Simply do the following:

  1. take a brush and a can with compressed air (which can be obtained in every electronics store)
  2. use the brush to clean the outer holes the cooling system for your processor
  3. use the bottle with compressed air to blow some air trough the cooling modules, I guess they must be really clobbed with dust
  4. If the product overheats again then go to a computer technician who is familiar with the mobile computing systems and let it clean the CPU cooling system correctly, including the fat CPU cooling

  That's all

  BR

• Hardware upgrade on Satellite P10 792

  Hi guys
  1.i want to upgrade the hard disk with a new one (INTERNAL), can I install?
  inform me of the specifications...
  2.i also want to increase the ram, the type is sodimm 333 MHz?

  Hello

  S information memory for the P10 792
  PC2700 (TBD) 512 MB (PA3312U - 1 M 51)
  PC2700 (TBD) 1024 MB (PA3313U-1M1G)
  PC2700 512 MB (PA3312U - 1 M 51), 1024MO PC2700 (PA3313U-1M1G),
  PC2100 512 MB (PA3164U - 1 M 51), PC2100 1 GB (PA3278U-1M1G)

  Maximum of 2048 MB

  By

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.