Satellite P10 804: how to activate the battery icon visible on the taskbar?

Similar Questions

• Satellite P10 804: how to remove the HARD drive?

  I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

  Does anyone have the details on how to do?

  Hello

  To my knowledge, the HARD drive must be placed under the optical dirve.
  To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

  1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
  2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
  3. remove the four silver screws that attach the HARD drive to the HARD disk case.

  But be careful. If you have no experience ask someone with more experience in these replacements.

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite P10 804 will not accept the upgrade of RAM

  Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

  In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

  Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

  The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

  Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

  Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

  1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

  The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

  Any advice welcome. Thanks for reading.

  > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

  Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

  The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

  So it must be a module problem

• Satellite M35X-S163 - how to activate the touchpad scrolling feature?

  How to activate the functionality of scrolling on the touchpad of my laptop Satellite M35X-S163?

  Hello

  The touchpad scrolling feature can be enabled in Control Panel > mouse.

  You'll find the option but don t forget that the driver for the touchpad should be installed and you can find it on the Toshiba site:
  http://www.CSD.Toshiba.com

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Satellite L750-1PH - how to activate the Turbo Boost technology?

  Hello

  I want to activate the * Turbo Boost technology *. But I don't know how.
  And the fan makes a lot of noise and hot air of spit.

  I will be very happy if you could help me :(((

  Thank you
  Best regards
  * Bahad? r ACAR

  You have Intel Core i7-2670QM processor and this processor supports Intel® Turbo Boost technology 2.0

  These features of the CPU can be enabled and disabled in the BIOS. But just in case where this option is available in the BIOS.
  When this option isn't available, you will not be able to put ON or OFF

• Satellite M115-S1061 - how to activate the standby/Hibernation mode

  I recently got a laptop from my father and the settings are a bit strange.

  My modes standby and Hibernate are also well off and due to the lack of a cooling device, it constantly turns off when I leave.

  So whenever I leave, I have to shut down my computer, then restart again and his old fact.
  I need to find a way to get my laptop to activate the standby or hibernation mode so I can't go through this process each time.
  Its a Toshiba Satellite M115-S1061.

  Also, I checked the options of standby power, and they say the same things as well.

  Thanks in advance for the help!
  -trueway44

  Hello

  The history is confusing for me.
  Just a few questions to the beginning:
  What operating system do you use?
  You use Toshiba power saver or power Windows options?

  If you know that this laptop turns off when you leave why do the restart if you know it goes off even when?

  You let your laptop with no activity, or you leave while an application is running?
  Maybe is related to overheating decommissioning.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite P750-13F - how to activate the keyboard backlit on Windows 8

  Hello!

  Today, I installed Windows 8 premium on my P750-13F, which features a backlit keyboard. In order to upgrade to Windows 8 I had to uninstall certain Toshiba drivers and other programs.

  Now, I have fully functional Windows 8, but I don't know how to access the functions of FN key (screen brightness, wifi power button, volume up/down).

  Now that the FN key is innoperative function that I miss the most is that for illumination of the keyboard, because I can still do everything else by other methods (I mean volume up/down, brightness etc) but I don't know how to illuminate the keyboard now.

  I tried to install the Toshiba hardware configuration utility, but it will not install with Windows 8. I like so much if the FN key remains innoperative (although that would be nice if it would not) but what I really want to be able to change the lighting of the keypad.

  I'll be very grateful for any ideas.

  Up to Toshiba doesn t offer Win8 tools and utility there is nothing you can do about it. I hope that will happen very soon.
  So please be patient until the stuff of Win8 will be offered for download.

• Satellite 1800-804: how to change the standard screen?

  Hello. I'd be very grateful if someone out there could help me. I have a 1800-804 Satellite which I removed the screen and instead connected to a screen size of Compaq and it works very well for the last 12 months so much so that I use it as my main office.

  My problem started when I downloaded a movie and I wanted to watch it on my tv. I went in the set up screen and it goes from 1 to 2 (because told me in this way that would turn screen to the TV screen).
  It was my mistake.

  Now I can't get it reversed back to the normal screen. The on-screen display, it's as if it is in ECONOMY MODE (large icons) that can only make?

  Thank you.

  Hello

  Which screen has low resolution? The external monitor or laptop screen?
  I guess you display resolution has been set to the lowest value.
  The resolve you should go in the graphic properties and select the view then increase the screen area and colors.

  Also check the advanced option. In the peripheral view tab, you will find the different options and device monitoring multi section where you can set the parameters on screen LCD/CRT or LCD/TV

  Check it out.

• Satellite Pro P100: How to activate the sound of keyboard typing

  How can I turn on the audio / sounds on my keyboard so that it creates a beep or similar, whenever I have to press a button - I need this because I keep missing keys and make a lot of typos.

  I tried all obvious and don't see any mention of how to do this anywhere?

  Hello

  I can just confirm that there is no standard option WXP and for that and you need some additional software.
  Expensive chain, you are great. I really wonder how you find it. ;)

  A BIG Thank YOU for your great job offers!

• No satellite L855-B511 - how to activate the operating system Windows - no serial key

  Hello

  I had to replace the HDD on my L855-B511, I tried to create a recovery media to replace the HARD drive by using both DVD and USB sticks, but it didn't work because I think that the HARD disk has been corrupted.

  There is no license sticker windows at the rear of the laptop or under the battery (only the windows logo 8), so I downloaded an app to retrieve the product key from the registry, but after reinstalling windows, I tried to turn it on, I discovered that the product key is not valid (tried the application on another machine and it gave me a product key different than that on the sticker).

  is there a way I can reactivate windows without having to purchase a new license?

  > is it possible I can reactivate windows without having to purchase a new license?

  There is unfortunately no way to do it. In my opinion, your problem is clearly guaranteed service provider and the question should swap HARD drive for free. This model is fairly new, so I assume that the warranty is still valid. You could tell the guys to service this recovery media creation didn't work and ask if you can get a free recovery media.

  If you want to fix on your path you must order the new recovery disc. This laptop model is available on the Middle East so I don't know if you can order it on https://backupmedia.toshiba.eu/landing.aspx but you can check it out.

• Satellite P50T-A01C - how to activate the touch screen feature?

  Hello!

  I just got P50T-A01C yesterday, the first touch screen was working fine.
  But somehow, it doesn't now.
  Someone kindly teach how the function touchscreen on even once?

  Thank you!

  Ken

  I don t have this model of laptop and cannot help you on this subject, but it must be described in the document s user manuals.
  I also saw that this laptop has preinstalled software touch screen. Play a little with it and in the worst cases try to reinstall. You can find version 2.01.0020 page of Australian download for your laptop model.