Satellite P10 804 upgrading wireless card

Hello

Ive been trying to find a list of compatible wireless cards to upgrade my Satellite P10 804 but can't find.

The wireless card is a Toshiba PA3171U-1MPC, but it does not have the standard 802.11 G and no WPA security.

Anyone know of the good cards replacement that will work on my laptop?

Ive met this one but I'm not sure if it's compatible or not because I can't find any compatibility for it info: PA3416U-1MPC

Thank you

Mark

Hello

I think that the PA3416U-1MPC should be compatible.
I mean the laptop supports wireless Mini-PCI network card and PA3416U-1MPC is a Mini-PCI wireless network card.

The WLan antenna behind the screen of the laptop computers must be connected to the connectors on the wireless Mini-PCI network card.
Both connectors are identified with MAIN and auxiliary normally a white cable goes to the ESSENTIAL and a black at the entrance to THE

Good bye

Tags: Toshiba

Similar Questions

  • How to make a wireless upgrade on Satellite P10 804 card

    I have a satellite P10 804 and it has a 802. 11B wireless card built (only part no PA3171U-1MPC). It's too slow to stream multimedia from my office. My router has capacity G + and I would like to update my wireless card to be somewhere near the same speed. The upgragdeable of cards is integrated (easily)? If so, is the PA3374U-1MPC card compatible? and how can I change?
    Thank you
    Shaun

    Hello

    Yes, surely. You can improve it, but you should not use original toshiba parts. You can enter a Wi - Fi card with the standard of g on ebay for example and install it yourself. the wireless LAN card must be placed on the bottom of your machine behind a cover that is fixed with a screw.

    I suggest, if you plan to buy a new one, take an atheros card because they are affordable, they are stable cards and chipsets quality is very good (send/receive/you connecting to a network) If you can´t do something wrong with an atheros chipset.

    Welcome them

  • Satellite P10 804 will not accept the upgrade of RAM

    Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

    In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

    Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

    The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

    Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

    Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

    1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

    The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

    Any advice welcome. Thanks for reading.

    > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

    Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

    The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

    So it must be a module problem

  • Satellite P10 804: how to remove the HARD drive?

    I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

    Does anyone have the details on how to do?

    Hello

    To my knowledge, the HARD drive must be placed under the optical dirve.
    To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

    1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
    2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
    3. remove the four silver screws that attach the HARD drive to the HARD disk case.

    But be careful. If you have no experience ask someone with more experience in these replacements.

  • Satellite P10 804: cannot use the day before and the FN keys / hibernation

    Satellite P10-804. I had a virus and this has been supported by a professional. Since I can't use my Fn key and therefore cannot standby / hibernate etc. The sleep function does not work also if I use the "standby" button mode start Microsoft.

    The system just trying to go to sleep and restarts again, sometimes doing, it resets the date and time of the computer. Any help would be greatly appreciated. Thank you.

    Hello

    May I ask why you n t use the recovery CD Toshiba to restore the operating system on the P10 Sat?
    Simply boot from the restore CD from Toshiba that came with the laptop. This CD contains the Windows operating system with all the drivers and tools pre-installed.

    The installation process takes about 10 minutes. It of very simple but please note that this new facility will format the HARD drive.

    Other questions?

  • Satellite P10 554 LAN wireless connection

    Hello people,

    I have a laptop Satellite P10 554. I'm not able to get the wireless LAN. I have a Netgear wireless modem and a Netgear USB wireless "receiver". I have configured the entire setup and switched 'on' switch wireless on the left side of the laptop. Nothing happened. The light on the left side on the laptop that shows the availability of the wireless network never radiated.

    I have installed and inserted into the mobile network.

    Please advise on how should I proceed to get the wireless LAN working.

    Thank you in advance.
    Matel

    Hello

    As far as I know that the Wireless LAN is optional on this unit. This means that the appliance has been delivered without wireless card, but it s can put the card in the laptop.
    Are you sure that your device has a wireless card? You can check in the Device Manager. In addition, must be on the wireless network by using the switch on the side of the laptop and the key combination FN + F8.

    Please check these options.

    Good bye

  • Satellite P10 873 LAN wireless connection

    Hi all

    I have a laptop Satellite P10 873. I just bought a Netgear DG834GT wireless modem/router and can not get completely connected to the internet via Tiscali (ISP).
    The problem manifests itself in what I can connect to the router and can even ping various sites on the net. But trying to connect to a site using MSIE I just get "unable to connect" rejection page
    In addition, using the CMD prompt, tempting a Telnet session to a web site on port 80 is rejected for example "80 www.bt.com.
    I put all the securities to a minimum without effect.
    I have another laptop that connects and works perfectly with the Netgear/Ticali Installer. I also identically configured MSIE on both machines without success.

    Anyone has any ideas what could be the cause?

    Thanks Mike

    [Edited by: admin October 14 05 11:49]

    Hello

    Well, do you have Devil WLan configurations?
    If you use the Windows settings you must activate it in the WLAN properties and if you are using a customer this option should be disabled.
    Also, check if the windows firewall is disabled. This option please the good state of market for the wireless card
    Sorry, I put t have other ideas.

    Good bye

  • Satellite P10 804: where can I download the BIOS original version 1.1

    Is it possible that I can download the original bios version 1.10 for the P10-804 Satellite.

    Also the slash to the back button does not work. How can this be corrected?

    nevodoch

    Hello

    All BIOS for all Toshiba units, you can download from the Toshiba site:
    http://www.toshiba-tro.de/subpage/BIOS.html

    But you can not downgrade the BIOS for example: since version 1.2 to 1.1
    This is only possible by Toshiba ASP.
    In this case, if you want to downgrade the BIOS you should contact the service partner.

  • Update on Satellite S70-B-10N wireless card

    Hello

    Just got a laptop above this morning and I would like to upgrade the card wireless inside an AC7260 module. There is a significant lack of documentation on the inside of this laptop with no info on youtube either.

    Research on Amazon there are several variations of portable different for the AC7260 and I'm not sure there is anyone know what model number is made for this machine?

    Also did anyone know if this port is accessible by simply removing the backplate of the laptop because there is no access panel and I did not want to try to remove the keyboard.

    Thanks in advance
    A

    The laptop was equipped with the Intel Wilkins Peak1 WLan card / module combo BT

    So I guess it's the Intel Dual Band Wireless-AC 3160 module, such as reported by this Web site.

    https://wikidevi.com/wiki/Intel

  • Satellite P10 804: can I install module BT PA3121U-3BTM?

    I can install a Bluetooth PA3121U-3BTM in my P10-804, if so someone can give me pointers or a diagram... Please... Please... THX

    Hello

    Unfortunately, I put t found any details on this device and if the BT module is compatible but I found the other Bluetooth module: PA3271U-1BTM, which should be compatible with the Satellite P10 series.

  • Satellite P10 - problem with grafic card

    Hello

    At the start of my Satellite P10 - 554 today, the display shows not sorted pixel color around the screen. The message of the BIOS seems completely normal. After the start in graphic mode, from windows XP, the screen keeps being black.

    The hard drive works fine. I checked the display. It works very well.
    I guess that the graphics card (geforce go 5600) is damaged. Any chance of getting my phone fixed? Do I need a new mainboard, or is it possible to replace the graphics card? Where can I get the parts needed, used or unused? How the 'spare parts' cost? Better to buy a new laptop?

    Thanks a lot for your help.

    Steven from Germany, Duisburg.

    Hello

    > Any chance to make my phone fixed? Do I need a new main Board, or is it possible to replace the graphics card? Where can I get the parts needed, used or unused? How the 'spare parts' cost? Better to buy a new laptop?

    Are you sure that the graphics card is dead at 100%? This can be checked easily.
    You could connect the external monitor to the laptop and could check whether the same appears on the external monitor too. If the same failure would appear on the external monitor then the GPU could be really faulty.

    In this case the whole motherboard must be changed and such procedure costs a small fortune, because the motherboard is on expansive parts laptop. You should calculate 300-350 euros

    Then maybe a Council of second hand could be an alternative.

    Greetings

  • HP Pavilion dv6000: upgrading wireless card

    I want to upgrade the card wireless in my HP Pavilion dv6000. What are my options? I'm fine with an upgrade of the single band, but if a double Strip is now available for this machine, I would prefer that he.

    Thank you

    By looking at the drivers. I see a wifi iNtel into the mix and if you have a wifi iNtel I could choose a family of wifi iNtel to try something like card full length iNtel 5100 or 5300 to see if it works, but it's to try the cause, it can be costly to try to go that route. But I can tell if your system has a wifi iNtel so I would go with a family card full length of wifi iNtel. Also, you can try the older Intel 4965 which is dual-band you will not use all three connections but you can use two of the other and it works perfectly. I have a HP DV5 - xxx and a full length 5300 only connected to two connections and it works very well. Make sure if you buy wifi iNtel that they are close to corresponding to your model of HP models.

  • Satellite 1905-S303 PCI Wireless card does not start code 10

    I put a PCI BCM94306PM broadcom wireless card in my laptop. The laptop is equipped with led however one is damaged and can not be connected, these cards may work with only one side and I even read somewhere that they can work on a short range with no led. My problem is the Device Manager indicates that the device cannot start code 10. I have a fresh install of XP Pro SP1 (not from the original restore disk). With this in mind, I think there must be some Toshiba utility or the missing driver to allow the map to work. Any help appreciated.

    Hello

    Code 10 means that it is not present, not working not properly, or does not have all the drivers installed.
    In this case you need to download the latest driver on Toshiba website and install it.

    Best regards

  • Problem reading DVD (SD-R6112) on the Satellite P10 804 under Xp Pro SP2

    My Toshiba DVD SD-R6112 (P10-804) now reads no DVD-r it just to burn with Nero 6.6
    The sysmtoms/anamnesis is therefore
    (1) it used to work fine. That is, that I never had a problem with playing on the P10 DVD, that I burned on the P10
    (2) DVDs burned before (before a few weeks ago) on the P10 continues to be readable on the P10
    (3) BUT DVD burned recently (5 or 10 last burned on 2 different types of media and two different burners) can be read in the drive of P10. The DVD is not yet recognized - it sometimes changes shape explorer DVD - RW CD - R, but that's all. No file, no nothing.
    (4) these same (unreadable by P10) DVD is very well played on two other DVD players I have (Freecom USB and divx standalone player). The drive can read the DVD (USB Freecom) CDFS file system reports, no free space (Nero 6.6.0.14 was said to not to allow future sessions) and all appear normal.

    The DVD driver is Microsoft 5.1.2535.0 1/7/2001. The DVD 1031 firmware revision.

    Nero was the only program running when the DVD is burned (no file to add). The verified OK after burning DVD.
    I can't find an update of the firmware on the Toshiba site so I'm a little stuck on what to do next
    Any ideas?
    TFAI

    Hello

    I read in several journals, computer and on some sites that not all drives are compatible with all media. Sometimes, readers cannot read the media burned because of the 3rd party software that prevents access to the media or files.
    Generally, it is not easy to say why some readers read and write media and some readers cannot handle the same media. There are many factors.

    Sometimes, the firmware update will help you resolve problems with reading or writing.
    I found this SD-R6112 page with a driver for this device and the latest firmware version.
    http://www.Toshiba-Europe.com/storage/PDL.asp?page=PFW&NAV=RSC_PDL&model=SDR6112&PTYPE=D VDRECSL

  • Satellite P10-804 - Question on new install

    I am wanting to do a clean install on the old Satellite P10 [2004], but I'm a little worried about the updates that I'll have to do.
    In my view, that he could run in the hundreds.

    All Tips how do appreciated.

    Hello

    You can install the Windows operating system on your laptop and need to install the drivers of P10 separately
    The drivers can be downloaded from the Toshiba page.

    Of course, you need to update the Win for the last state operating system but it should run automatically, you can drink a coffee and wait ;)

Maybe you are looking for