Satellite P10 - no USB function after clean XP install

Similar Questions

• Satellite P10: Controller USB and IEEE 1394 do not work after WXP re - install

  Does anyone know how to fix this problem?

  I recently reinstalled WXP home on my satellite p10 computer laptop and then installed all drivers and utilities from the support CD that follows with Notepad.

  Everything works except for USB and Firewire.
  Very strange screen system shows me that I have bad driver for usb controller, but when I run the utility chipset problem remains. I even downloaded the drivers on the Toshiba support home page in the hope that it would be a different version and they would work, but nada... same problem persists.

  Someone knows how to solve this problem, or what is suitable driver for the controller USB on satellite p10 554 and where can I find this driver (without the entire chipset utility?)

  Thank you in advance for your help!
  David

  Hello

  the funny thing is that USB is IN the chipset. The problem is that you can extract some drivers you need, given that utilities chipset intel are a complete set.

  So, I suggest you go to the website of intel (www.intel.com) and then download the chipset utility. Don t forget to update your windows (Service pack, updates, bugfixes) because the operating system has sometimes problems with the hardware installed, then an update will solve this...

  I hope that you have little luck with the original software of the chipset intel.
  Give a few comments after completing the makings and let us know if it worked.

  Good bye

• Satellite P10-873 - no sound after reinstalling windows device

  Satellite P10 873 PSP 16th:-not his Device
  Win XP-Home Edition SP2

  Everything was going well until a bad sector on the hard drive. I have Ran Chkdsk /r and re-installed windows.

  In Control Panel/System/Hardware/Device Manager it is a unknown device in the sound,.
  Section of video and games controllers which I think can be unit XT of SRS truesurround.
  also Realtek AC97 sound devices shown as correct and functional.

  Tried to load the audio drivers from the website of Toshiba (sound-s-p10-xp-510005490) and still no audio device

  available from the configuration/sounds and Audio devices Control Panel.
  Got the patch KB888111 from Microsoft and installed, still no luck.

  Any ideas as to what I'm doing wrong please?

  Satellite P10 is old enough laptop model. I have very good experiences with P20. It's almost the same laptop, but a bit bigger. A friend of mine uses P10 for the job and we have installed WXP Pro using all the tricks of the Toshiba support page. The OS is installed two years ago, and the sound still works.

  If you can not get this to work, I recommend you remove all the important data for the D partition or save on an external device and make the clean OS install. It will be interesting to see if the problem persists.

  By the way: is a connected to your laptop satellite external game controller?
  An interesting solution, I found here.

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• Satellite P10 shuts down unexpectedly after only 4/5 minutes to be turned on

  Hey, I have a problem with my Satellite P10 2.5 years.
  The problem is it turns off unexpectedly after 4/5 minutes being powered on.

  After he fires it on again for about 7 to 10 HOURS, even with the power drive inside displays the 4 lights on the front, but it will not even power the start-up routine.

  I tried different combinations of power/battery and I still get the same problem.
  I'm sure that it is overheating and then take hours to enhance down.

  Your opinion on this would be appreciated.

  Thanks in advance...

  Ben

  Hi Ben,

  Certainly, it sounds like an overheating issue from your description, although I expect to recover much faster than 7 to 10 hours. You can try the technique of aspiration of dust on the grids of aspiration air to see if it improves the situation. Also check that the fans are working properly and that there is sufficient space around the appliance when it is in use.

  Kind regards

• Satellite P10-304: USB does not work after the upgrade to XP Pro

  You just bought a satellite SP10-304. Beautiful machine, but comes with XP Home edition. I've updated to XP Professional but seems to have lost the USB Ports. Device Manager indicates that they are working, but plug 'all' USB devices produces no reaction/recognition.

  Any ideas, please? What I put in the recovery disc and go back to XP Home?

  Thank you

  Ian

  Have you installed Microsoft all MS on this unit?
  I recommend that you install all updates.

  Win XP Home uses the same drivers as WinXP. In this case, everything should work without any problems.

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• Satellite P10 Series - USB Ports not working not

  Hi - I have a portable series of P10, PSP10E-0RCJM-EN.

  Don't know when or how this can happen, but none of my USB ports work integrated.
  They are all recognized and installed when you look in the Windows Device Manager.

  I am running Win XP Home Edition with SP2 and latest drivers and BIOS downloaded from the Toshiba web site.
  I had the hope that it might be a simple device or a driver of motherboard problem, but does not appear.

  Using a card PCMCIA USB works very well, but uses only one card slot that I need for other purposes.

  Anyone has more suggestions please?
  I hope you can help, impatience of someone soon!

  Graham

  Hello

  Try to remove all the ports from the Device Manager.
  Then try to restart the device. After this procedure, the operating system should recognize and install again the USB ports.
  It would be very interesting to know if the ports are working properly after this new facility.

• Satellite X 200-251 lights after cleaning the speakers

  Basically, my laptop is suffering from overheating problem because the fan should be cleaned. I decided to give it a go myself and unscrewed all the screws below etc, released the album cd and battery and removed the plastic Panel that covers the speaker who has the power button and other buttons on it.

  So I decided to check the Internet for a guide on how to get to the fan. Ultimately he appeared more complicated then I thought and I dropped but I thought I might as well give the speakers clean up a bit because they were pretty dusty.

  So I'm on a rag and a cotton swab with one end covered with Wd40 and began dusting off a cleaning. Then I put the Panel in place, put all the screws underneath of the laptop and returned battery and plugged the power cable. But... When I pressed the power button would not turn on!

  The small lights that indicate to the laptop is plugged in and the battery is in are turned on, but nothing happens when I try and turn it on. Also I can't get the cd player to stay, it keeps slipping out! I would really apreciate to help here!

  BTW, the model is satellite x 200-251

  Hello

  Looks like something was wrong during disassembly.
  It s really hard to say what role could be affected he sounds a little like the CPU might be that he touched s not connected correctly I also recommend to check the RAM modules.

  Memory modules must be inserted correctly check this box

• Satellite Pro 6100 USB problem after stand-by

  Hey all,.

  I have a Satellite Pro 6100 and when that I start my computer, my USB ports work fine. However, as soon as I wake, I get about 6 pop-up messages stating "USB device" unrecognized and my USB ports do not work.

  Device Manager indicates they work fine, so I'm just confused.

  Any help?

  Thank you!
  -Geoff

  Hi guys

  I'm not sure but I think the BIOS update can fix this. Have you already checked if there is a new update of the BIOS for your unit?

• Satellite P20 - beeps at startup after cleaning the keyboard

  Hey!

  I have a Satellite P20, which is strange. I have cleaned the keyboard (deleted, took apart and cleaned all the keys) but when I boot up to now (I have connected the keyboard) it will * beep beep * beep beep beep beep * on me (sounds like one of those things in the hospital). If I wait for some time, it ends by starts XP but then some keys (5%) did not respond (S and arrow down to name a few).

  I tried to start with the keyboard disconnected and that works like a charm.

  Then it is the keyboard that is defective? (I'd rather not buy a new one just to have the same problem) or is it keyboard connector or hurt (I have unplug and connected the keyboard several times)

  I am very grateful for any help or advice I can get.

  Best regards

  / Martin

  It is strange, but maybe the keyboard is defective, as you say.
  Or you don t have the keyboard connected to mainboad correctly. Check again.

  Maybe a key is always pushed and get the beeps. Select this check box.

• Satellite A300-D 21W crash after clean windows7 x 64 installation

  I just bought PC Toshiba laptop with Vista, and I tried to do a clean install of Windows 7 x 64. However, when you reboot a blue screen. I then run the restore function and I ", at the beginning. It only seems to happen whenever I update my system using Windows Update! It is very annoying.

  Can anyone help, please.

  Kind regards
  Stephan

  Hi Stephan,

  Can you please tell us what you mean exactly the BSOD code?

  I don't know but maybe a software or something another isn't compatible with Windows 7 m t and cause this problem. What applications you have installed?

  In my opinion, it has something to do with Windows 7 or a software, if your laptop works well on factory settings (preinstalled Vista version).

• The COM Ports on Satellite P10 do not work after the conversion to the WXP Pro

  I have a P10 (PSP13E-0372V) that I have upgraded from XP Home to XP Pro. Everything went very well and then I discovered that I don't have a COM port or at least Device Manager shows no COM port.

  If I try to dial, I get "Error 633 the modem is in use or not configured properly". Back to Bishop device to watch the modem which, it says, works very well. If I query the modem (Diagnostics) told me 'port that the modem is attached could not be opened. "
  Also, it is said it is attached to COM3 but I can choose any port and get the same result. (When I change the port I get the message "the port has been opened by another application. Renaming the port may have an unpredictable effect on the other applications")
  I tried to remove the modem and restart but no change.

  If anyone any ideas how I can get the modem to work.
  TFAI

  So any ideas on how

  Hello

  Usually WXP Home, Pro should work without any problem because all the drivers, tools and utilities can be used for the two operating systems. I just hope that you have preinstalled all things in order of good facilities.

  Have you installed the driver chipset from Toshiba download page right?

• Satellite L655-1DV - lost partition after the fresh install of Win 7

  Hello

  I have a Toshiba Satellite L 655 - 1DV and yesterday I installed windows 7-32 bit and all the drivers (clear).
  My problem is that after installing my partition (the one with the gbs much) was not recognized in windows.

  Management of the computer, it says I have 450 GB
  https://DL.dropboxusercontent.com/u/100247419/6655554.jpg

  but I have only 31 GB
  https://DL.dropboxusercontent.com/u/100247419/ttttt.jpg.

  How can I solve this problem?
  Thank you in advance.

  Hello

  How did you install Windows 7 on HARD drive?
  Format you the HARD disk during the installation process?

  Disk Management displays only a single partition. Which is really strange because even if the HARD disk should be formatted, you should get at least two partitions (a small partition for restore Win 7 files) and a larger system partition C

  I think you should try to change the size of partitions in disk management C.
  Right click on the partition and decrease the size of the partition. Then you could create a new partition and could mark it is active.

  It would be very interesting to know how the partition is displayed in Windows Explorer.

• Don't Aspire Switch 10 no sound after clean windows install

  I installed a clean version of windows 10 (not acer windows) earlier and since then against hepatitis has ever had his fate of the speaker or headphone output port. If I connect to HDMI or use the bluetooth speakers it works, but it's pretty rare that I do and it is certainly not practical.

  The drivers are updated, ive tried reinstalling them, fitness again with windows, playing with the bios but it is very limited with what you can do. I was going to attempt to reinstall the factory windows version 8, but I can't know exactly how do.

  If I go to playback devices, he thinks it works. the sound bar changes when I play something but no sound.

  It is intel audio device (WDM) OSH if this is useful.

  you have any ideas how I can fix these problems?

  Thank you

  Go to Device Manager > view > show hidden devices. If you have other devices > IWD Aud-Device_6, uninstall it. Then restart your system. Go to Acer supports downloads of drivers for your model. Download Realtek Audio Platform Installer from pilots and quick access. Install Reltek and then restart the system. Install quick access, then restart. Finally install the drivers for the platform. Restart and you should have sound.