Satellite P10 Pro won't stay on the diet

My Satellite P10 Pro regularly battery power even if the power is still connected and the LED on the front of the pc shows that it is connected. I then let the battery run down and restart so that it recognizes e presence of th rest turn on again how boring is that!

Any ideas what the problem may be? Don't think about physical connection problems - the LED indicates the current is always there!

Hello

In my opinion the answer can give you only one technician after checking your laptop. For me, it looks like a power electronic problem. Sorry, but I think that you will not be able to do anything alone.

If you use your laptop on the desk, remove the battery and use it with adapter only. My brother did the same thing, since the battery is faulty. Also try to start computer laptop on the power plug and put the battery in 5 minutes. It will be interesting to know the battery is recognized and invoiced correctly.

Tags: Toshiba

Similar Questions

  • Satellite P10 792 won't boot to the top

    Worked fine before, now won't start upward.
    I can not only see the TOSHIBA Logo no Bios, because the cooler clean cpu fan & I remove my Satellite P10 792 RAM without removing the battery.

    When I try to boot my laptop all I get is the blue power light coming on and the fan turns on 4 or 5 seconds and then nothing

    I tried remove the battery CMOS, will not always to start!
    Note: I'm living in eastern Libya, TOSHIBA ASP 800 km from me

    Best regards
    Fredj a.j.

    Check the voltage of the AC adapter, if his less than 19volts gift, it could be defective.

    Otherwise, it looks like he needs a new mainboard. You might be able to find one on eBay.

  • My Satellite C660-155 won't boot to the top

    My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

    It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
    Any advice would be greatly appreciated.

    For better understanding, you must offer more specific information.
    You can enter boot options using F8 at startup?
    Figure option fix my computer in the list?
    You can boot OS in safe mode?

    Did you create the recovery disk?

  • Satellite P10-504 - impossible to turn on the firewall

    Hi friends,

    I m unable to turn on my firewall, I get the widows message cannot start the firewall/internet connection sharing ics service. I have the Satellite P10 504 with WXP SP3.

    All ideas welcome

    Thank you
    Colin

    There are a few articles Microsoft Knowledge on this problem:

    [Some administrative of the Windows XP Security Guide templates can prevent you from starting the Windows Firewall service in Windows XP Service Pack 2: http://support.microsoft.com/kb/892199]

    [You cannot start the Windows Firewall service in Windows XP SP2: http://support.microsoft.com/kb/920074]

    Check both maybe you could solve using the workaround solution described in the present statutes

    Good luck

  • Satellite P10-133: I want to use the WLAN

    Hello

    What should I do when I want to use the WLAN with the satellite P10 133?

    Thanx

    Hello

    First that you check if your laptop has been equipped by the wireless network adapter.
    If this isn't the case, then you need to update.
    The easiest way would be a use of the WLan USB key.

    Check your WLan router level. There are different WiFi standards such as 802.11 A, B, G and N
    If your WLan router supports 802.11 B and G, then you should buy and stick that would support both standards too!

    Then configure the WiFi network (especially it s described in the installation instructions provided with WLan stick) and the WLan router.

  • Satellite P10 874: update BIOS wrong changes the serial number?

    Hello

    I have Satellite P10 874, my model number has erased the background after years of use.
    I recently did an update of the Bios of the Web from Toshiba site and realized more late it was for the SP10E models.

    Well my system did not fall down. (Part no) model number change if you update with a version of Bios, not intended to be your system?

    My system is still under warranty, but the new model series/number combo is shown as invalid global law database. My USB ports don't work anymore after that it showed a message of power surge.

    I need to go to the customer Service. Is there a way to retrieve my originial model no and not?

    Any help will be much appreciated.

    Concerning
    lejoe

    A 'bad' Biosupdate does or does not replace the modelnumber of your machine. So you don t have to worry when you give the machine to a service centre, they have the ability to retrieve your serial number with their system and understand the modelnumber of your machine.

    With regard to your USB ports: send the machine to your local concern for service-center and Don t on the modelnumber stuff. Your machine is still under warranty and since they will change about your pcb, your worries on the bad bios system is useless.

    Furthermore, I can't imagine that you seriously a bad bios Flash, since the machine during the biosupdate ususally scream if you try to Flash a bios wrong on it.

    Welcome them

  • Satellite P10-835, Instructions to connect to the wifi Atheros client utility?

    I have a P10-835 and you must configure the client Atheros utlitiy you connect to a Netgear 834 G Router wireless. Are there instructions on how to configure the Atheros customer?

    Hello

    1. start > all programs > Atheros > ACU > Atheros Client Utility
    2 2. Select the "Profile management" tab click on "new".
    3. put good profile name and network name
    4. check the Security tab and set the password if your network is encrypted
    5. check also if the windows wireless configuration disabled
    (It MUST BE DISABLED if you use a client for a wireless connection)

    You can find this option in the properties of the wireless network connection in wireless networks.

    Good bye

  • Clicked items/icons won't stay on the screen

    It's hard to explain, but here, example if I open a site and then open something else that I used to be able to point my mouse on the second point and click and it would now be on the screen and stay there until I turned off or clicked on something else, but now when I click on the element is present but it will not stay on the screen

    Same thing in the notification area, if I put my mouse over an item, then click on it will show, but when I touch the item goes back to the notification area. It started just happing there one day after Microsoft Tech Support fixed something on my computer while they must have made a few changes. When I asked it again as it was when it through, they have missed this thing. I hope someone knows what I mean.

    I'll guess that you got a phone call from the MS Support? If this is the case, you am scammed! If you don't call them, but paid by this company you should call your credit card company and explain the situation to them and if all goes well they can reverse the charge.

    You will need to reformat and reinstall your computer... You need to change all of your passwords and if you do online banking, you must call too.

    If you search these forums, you will find that a LOT of people get these phone calls.

    Sorry, but I hope this helps.

  • Satellite M70-337 won't boot to the top

    Hello

    This unit worked ok.
    He came to say that the necessary charge battery, so the diet was attatched, but nothing happened.
    Now the battery is discharged and the unit comes on even with the power supply connected.

    I checked the output of the power supply and that seems to be ok.

    It is likely that it is just the DC cylindrical connector on the laptop, or is it a more serious problem?

    Kind regards
    Nigel.

    Hello

    Perhaps my advice might help you;
    Try this:

    -Remove the battery and unplug the AC adapter
    -wait on ~ 20-30 min
    -assemble the two parts (battery & AC)
    -try to boot the machine

    If this will not help then it s a serious issue and the local ASP is your last resort.

    Good luck

  • Satellite P10 804: where can I download the BIOS original version 1.1

    Is it possible that I can download the original bios version 1.10 for the P10-804 Satellite.

    Also the slash to the back button does not work. How can this be corrected?

    nevodoch

    Hello

    All BIOS for all Toshiba units, you can download from the Toshiba site:
    http://www.toshiba-tro.de/subpage/BIOS.html

    But you can not downgrade the BIOS for example: since version 1.2 to 1.1
    This is only possible by Toshiba ASP.
    In this case, if you want to downgrade the BIOS you should contact the service partner.

  • Satellite L20 260 won't boot to the top, every time it freezes with no reason

    Hi all

    I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
    x 10, Daniele.

    Hello

    It's not easy to tell if the problem is software or hardware related.
    You must install the OS from the Toshiba Recovery CD and again test the functionality

    If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
    You can try using MemTest 3.5 tool.
    It checks the memory of a malfunction.

  • My Satellite unit of won't go to the Hibernate

    Hello

    The problem with my computer laptop satellite is "when I close the lid, the system starts to Hibernate (blue screen of Microsoft) and stay there forever.
    I tried to change certain settings without help 'I also tried to make the true energy saving control panel management' and I get a message that tells me to use only the parameters of power of Toshiba.
    What can I do?

    Thank you.

    Hello

    This message is recommended to use the Toshiba power saver, but you can try to use the power of Microsoft options. Believe me on this path is not easy to say why this happens and what is the reason for blue screen. I guess that your unit is working some application that doesn t allow to go into hibernation mode.

    Try to check in the Manager of tasks of all running processes. You can try to end some of them manually and retest the hibernation mode. I hope that support for hibernation is turned on electricity from the day before.

    Good bye

  • Satellite P100-434 won't boot to the top

    Hi Ive got a Satellite P100-434 and Ive had for more than a year.

    Unfortunately today I couldn't get started.

    The power led lights up, the HARD drive makes light very briefly.
    The display lights. If she does not even there to boot in the bios.

    Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

    see you soon

    John

    Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

    However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

    Also try with the power cable plugged in power and remove the battery.

    If all else fails, then you have a very expensive paper weight.

    Good luck.

  • My laptop Satellite A100-147 won't boot to the top

    my computer laptop satellite does not start until past the screen "in contact with toshiba" unless I press and hold zero and the power button

    Can you please tell us which model of laptop you have exactly and what happens when you press the button walk / stop?
    Don t hold anything, just turn it on laptop and describe what is happening exactly?
    What operating system is preinstalled on this satellite notebook?

  • Re: Satellite M30X - battery won't charge unless the laptop is turned off!

    Hello

    I have a Satellite M30X who is about 4 years old and all of a sudden, she stopped electric network load when the laptop is turned on but strangely fees - although very slowly - when it is turned off.

    Any ideas please.

    Thanks for your help
    Amanda

    Hello

    If you want and if you can, then you could try to replace the battery to check if this problem is related to a dysfunction of the accumulator.
    I mean your battery is 4 years old and it wouldn't be nothing unusual if your battery does not work as it should.
    My battery is about 6 years old and 3 years may not be loaded correctly.

    But note that these are only suggestions and if you want to be 100% sure, you should ask a technician for a detailed notebook check.

    Concerning

Maybe you are looking for

  • Why can't I open or save an attachment sent?

    Sometimes, when I get an attachment icon 'trombone' there no option to "open or save" it and I can't see content. It is not every time, but enough times that it is very frustrating and can find no solution online.

  • Delete locations of XY graph at design time

    Thanks to LabView 8.6 I inherited several screws maintenance and have met the 'next question' - there are multiple XY graphs, tracing a variety of data and by optimizing things to remove redundant data or unnecessary properties of the XY graph reflec

  • How to add a file

    Hello, I have a problem with a very simple task: adding new data in a file... Why this test vi does not work? I always get the "line 1" replaced by "line 3". Thanks for any help, Vincent

  • reinstallation of Windows 7 premium edition family

    I installed the free version of windows 10 and I don't like it and now I want to go back to what I had before which is windows 7 Home premium. This edition of windows was already on my pc when he bought and I do not have a disk but I have a product k

  • USB MTP driver fail when the computer is connected to the domain

    Hello Please help me solve this problem now, I had an old thread who died http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2de8fbe0-f0a2-497c-bf3a-0c18527adb22/?referrer=http://social.technet.microsoft.com/Forums/en-US/winserverge