Satellite P10 Series - USB Ports not working not

Similar Questions

• Satellite P10-304: USB Ports not recognize anything

  I have a Satellite P10-304 and the USB ports not recognize anything that are attached to them. Device Manager tells me that they are enbaled and works correctly. What can be wrong with them or what can I do?

  Hello

  One of my friends has the same unit on the work and everything works perfectly. It uses the USB hub too and have many external devices connected to the unit.

  By the way: something like who can occur if the external device is not removed correctly use safely remove hardware option. If you try to connect any other device after that in most cases it is not recognized at all. In this case, you can restart the device or remove ports from the Device Manager and use the hardware detection to find them again.

  Good bye

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?

• Satellite M30-106: USB Ports not working not

  Hello.

  I have a problem with my Satellite M30-106. One day, the system froze (Windows XP with SP2) during the passage of the machine off. I was forced to keep the button "power" for a while in order to close the system. However, since all 3 USB ports do not work.

  The system does not recognize the "" them. I can't see in Device Manager. I tried to reinstall the system, but it did not help.

  Can someone help me, pelase =)

  Hello

  It looks like a hardware problem. At whatever it is connected to the USB ports at the time? Could you check the USB ports visually and see if they are damaged or wobbly. It is a bit of a long shot, but you may have a short circuit decision and which could disable the USB.
  If the motherboard is damaged then outside fixing/replace your only option would be a PCMCIA USB card, they are not expensive.

  Best regards
  Swarvek

• Satellite P10-304: USB does not work after the upgrade to XP Pro

  You just bought a satellite SP10-304. Beautiful machine, but comes with XP Home edition. I've updated to XP Professional but seems to have lost the USB Ports. Device Manager indicates that they are working, but plug 'all' USB devices produces no reaction/recognition.

  Any ideas, please? What I put in the recovery disc and go back to XP Home?

  Thank you

  Ian

  Have you installed Microsoft all MS on this unit?
  I recommend that you install all updates.

  Win XP Home uses the same drivers as WinXP. In this case, everything should work without any problems.

• Satellite 1900-303 USB port not working - USB hub?

  Hello. Deploy a Satellite 1900-303 with two USB ports. One of the ports stopped working. I guess it's permanently broken. Just browse the site, it seems that the easient of thing to do would be to get a Port Replicator - one of them:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&selCategory=4697&o ldCategory = 4697 & OPTION_ID = 95631 & toshibaShop = true & t ab = 1 #1

  I wanted to know is it just to sink my remaining a USB port, so that I get 4 USB ports (and all others)? What USB speed I would get?

  Thank you!

  Rich

  Hello

  As far as I know the unit supports USB 1.1
  So I guess if you are using a USB hub external, USB ports work with USB 1.1 properties.
  Maximum data transfer should be 12 Mbps

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite L650D-103 - USB ports do not work

  Hello

  I have a Satellite L650D-103 with usb ports not working only (no mouse, no printer) of a windows update 7.
  I tried a system restore, but it has not solved the problem.

  When I check the generic system card realtek controller is disabled.

  What can I do?
  Thank you for your help

  + The message was edited: post has been translated.

  Hello

  I recommend you remove the hubs and USB controllers in Device Manager.
  Expand the domain controller USB (in Device Manager), choose the USB devices - root - hub USB enhanced host controller, and press DELETE. This must be done for all devices listed there.

  Satellite L650D-103 was equipped with an AMD chipset.
  The chipset driver is part of the ATI display driver and that's why I recommend you to reinstall the ATI display driver again.

  Finally, restart the laptop and test the functionality of USB port.

• Satellite A200-13O - USB port does not work

  Can you help me? I have a new Satellite A200-13O, USB does not work.

  Hi Gilbert

  What do you mean exactly with the USB does not work?
  You plug the 3rd USB external devices advantage, which cannot be recognized?

  Have you installed all necessary drivers for these devices?

  What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

  Please post more details!

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• Equium A60 - 692 USB Ports not working not

  Hi all - new to the forum and what a good place to find info on Toshiba laptops. Anyway - after a recent storm, I lost connection to my ISP broadband - contacted the helpline who advised me to Exchange my ADSL modem to an Ethernet - made and corrected the connection problem - however - only after having it done I realize has none of my devices (printer, camera, Web Cam etc.) worked via the USB ports. I've uninstalled and reinstalled the system and drivers for devices without result. The device displays 500ma of power manager is available for each of the 3 ports but watch 0ma used. The Device Manager also shows that the USB ports are working properly. Can someone help or advise if these ports on a separate card or they are part of the motherboard. If Yes, where can I get a. Congratulations to all - Andy

  A lighting strike is not good news, if she gets hit by a kind something can go wrong. My guess is that your laptop USB ports has taken suddenly by a massive power surge that probably damaged the chips inside. It could be a Windows problem, or not the only thing I could suggest is to use a bootable Linux such as Knoppix CD and run a command called usbview with some USB devices.
  If the USB has been confirmed dead then your only option is to use an adapter CardBus USB 2.0 providing your CardBus slot is not damaged too.

  Richard S.

• 8.1 Windows 64 - bit 3 USB ports not working not

  I have a model computer T430s 2352CTO, running Windows 8.1, 64-bit version. Before upgrading Windows 8.0 all drivers have been updated. The USB ports 3 worked properly, in particular an external hard drive of 1 GB running. After the 8.1 update, 3 USB ports work always, but only for about 30 seconds, then the hard drive stops. The power led remains on the hard drive, but it no longer displays in windows Explorer.

  In Device Manager, I'm gone to Bus USB-> USB controllers Root Hub-> properties-> (under general it says "this device does not work correctly)-> Power Management-> unchecked the box"allow the computer to turn off this device to save energy. Unfortunately, it doesn't seem to stop the problem. Any ideas?

  Please try this:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-Windows-8-1-my-USB-DRIV...

  Thank you!

  Houman

• Pavilion p7 - 1380t: USB ports not working not

  The two front USB ports do work not today. Worked fine yesterday. Everything I plug is not coming. Using ports in the back, they work very well.

  Someone at - it ideas about the problem and a fix?

  Thank you

  Hello @xploded16,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the front USB ports on your desktop computer do not work, and I'd be happy to help you in this case!

  To enable your system to recognize the USB ports before once again, I recommend that you follow the steps described in this document on Troubleshooting connections USB (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers