Satellite P10 - sometimes it will not be running

Hello

I have a problem with my Toshiba Satellite P10 (bought in 2004).
Sometimes it will not be running (no air conditioning, no battery) and sometimes the "Shut down" - the dialogue appears as if I had pressed the power button (really, I have not). Then, he died instantly, and I can't turn it on. Rarely turns without touching the power button a few minutes later.

First, I assumed that the reason was the envelope, but recently the same problem appears despite the case open.

Finally, I think that the problem is caused by a defective power controller chip. So, I read that I could at least try it deflexing by a hairdryer. This is why I would like to know where the power controller chip is located on the motherboard and how do I recognize it.

Thanks in advance!

Sebastian

Hello

[If your notebook won power t on sometimes you check out this article: what steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

But I think that no one here can tell you where the power controller is replaced and if you can fix it yourself or not. Here he s only one user to user forum and if you have these technical questions should ask a technician for laptop (authorized service provider) for help. Guys have access to all the databases of Toshiba and can order spare parts Toshiba and it would be no problem for the guys to repair the device for you. ;)

Tags: Toshiba

Similar Questions

  • Satellite P10: The drive will not burn DVD

    Hope someone can help me,

    I have a Toshiba Satellite P10 and have just received some photos software, burning
    But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
    What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

    I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

    I have the Nero log file failed
    Done if it's any help to anyone.

    A big thank you Michael.

    Hello

    What about different DVD media? Have you tested the media DVD-R or DVD + R common?
    Have you tried different brands of DVD?
    I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
    So I think you should check different DVDs.

  • Re: Satellite A210 - cooling fan will not stop running

    I am owner of a Satellite A210 laptop. I've owned this during 2-3 weeks. Thursday, I noticed that my fan was working very hard, fast and never stop. Before that, he'd come rarely. I restarted the computer and once it came the fan came and does not stop. I left it for 30 minutes and it still continues. I checked down to see if she was overheated and it wasn't. I bought a little chilled out air and breathed he threw the two events, but she still continued.

    Should I take back at the store that I bought and ask if they can fix this problem or is there a solution that I have not found?

    Thank you
    Tyler

    Hello

    Try it please change the option of cooling method in the power settings to see if the cooling fan works more slowly. If there is no difference, you can contact the store and see what they say about it.

  • Satellite Pro L100 - DVD will not turn even upward

    My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

    When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
    Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

    I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
    If this is the case why Windows XP does not recognize a DVD - RW?

    If someone sees something I missed please?

    Hey,.

    Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

    The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

    Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

  • Black vista Windows 2009! system will not stay running...

    my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

    Black of Vista is NOT supported by Microsoft.

    Go to where you downloaded from / got fix for support.

    Mick Murphy - Microsoft partner

  • HP Officejet Pro 8500 A909 all: sorftware HP installation program will not stop running

    I recently uninstalled the software and drivers for my printer as suggested here.  I installed the drivers and software the latest complete features of the HP customer service.  Now the program will not stop running even after it has completely installed. The disc in the picture will not stop running and the window does not close.

    Hey @David146,

    Welcome to the Forums of HP Support!

    I see that you have some problems with the judgment of some installation of HP software to run on your PC of Windows 10. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. On your PC, press CTRL, ALT and DEL keys at the same time.
    2. Click Start Task Manager.
    3. Select the HP software from the list.
    4. Click end task.

    Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

    Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

    original title: AutoPlay

    Hello

    You can fix the error in reading auto/AutoRun.

    AutoRun/AutoPlay does not work when a CD/DVD is inserted
    http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

    AutoPlay - Autorun does not not under Vista
    http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

    Troubleshoot AutoPlay
    http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

    CleanHandlers - AutoPlay Cleanup utility
    http://WindowsXP.MVPs.org/autoplayhandlers.htm

    See this and also scroll the messages below.

    How to change the settings for AutoPlay Vista
    http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

    In the opposite direction might help.

    How to add entries customized AutoPlay in Windows Vista
    http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

    I hope this helps.

    Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

  • My screen saver is set on various photos & first, they light up but they will not stay running

    Original title: screen saver

    My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

    Hi mel merrill,.

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    3. you receive an error message?

    4. do the computer in sleep mode?

    Method 1

    See the link below and run them the fixit tool available, check if it works.

    Windows Photo and slideshow problems

    http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

    Method 2

    If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Envy 5530: Emits a light HP Envy 5530, but the printer will not be running

    Printer of opportunity, so no guarantee: it out of the box, plugged in and set up. I was able to connect wirelessly to my computer, but I don't have the right to ink cartridges. When the ink is right, I plugged it again. This time the printer power not on at all. The only thing that happens is that the signal power light briefly when the first powered. This isn't a loose thread, because I can only duplicate the symptom when connecting, not when moving or unplug the device. It isn't food, as I have him succeeded and get the same exact symptom. (PS, thanks for the power supply internal easy-to-swap!)

    Is it a kind of fashion 'sleep'? Any suggestions as to what this is. I am rather stuck with it since I bought the ink and an additional power supply, so I would like to address them. Help, please! Thank you!

    Hello @azvlr,

    Welcome to the Forums of HP Support!

    I understand you are having feeding problems with your used HP ENVY 5530 e-all-in-one printer. I see that you have already installed a new set of ink and replaced the internal power supply without result. Unfortunately at this time if a new power supply fails to solve the problem of flashing light output that the next step would be to use the printer.

    Please take a look at this paper Support HP "no power" to ensure that all steps are completed that follows: The HP printer will not be running or to respond when the power button is pressed

    The HP Envy 5530 is always a newly released product. Therefore, I highly recommend contact our telephone Support queue to explore additional options. If a replacement printer is necessary food and ink will not be wasted because they can be used in the replacement printer.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    Regardless of the status of the guarantee, please call and see what additional options can do for you. I wish you good luck!

  • Satellite A300 DVD tray will not open and cause high CPU utilization peaks

    Hello

    I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):

    DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.

    When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.

    I replaced Win7 32-bit with a 64-bit version and the problem persist.

    Help, please. Thank you.

    I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.

    Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.

  • Satellite P850 - Windows 8 will not restart properly

    Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

    It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

    I would be very grateful for any help that anyone can give me please.

    I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

    + Windows 8 recovery & Repair +.
    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

    Please post comments if this helped and how you can solve this problem!

  • Microsoft 'Fix it' will not download/run/save

    Hello

    Microsoft 'Fix it' will not download, Vista SP1 32, running with the Defender, basics of security, AVG 9. and Win firewall. I added the site as exceptions on IE etc, but I can't get the .exe to others... BECAUSE IT WON'T SAVE TO THE OFFICE OR TO RUN!

    Help please

    Hello

    You shouldn't run MSE with a complete other antivirus. And Defender is disabled by MSE as it does
    the same function for spyware and antivirus adds.

    What Fix - it you try to run? What is the problem?

    AVG is probably the primary cause. I would uninstall it by using the removal tool or Special Instructions
    from their site - AVG 9 is causing many questions. Usually best to disable as much as possible before
    the abduction. Also download but do not install the replacements until after the deletion is completed
    and a reboot. Use the method below to all in the right order.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    AVG removal tool
    http://www.Avg.com/us-en/download-tools

    -------------------------------------------------

    Here's what I use and recommend:

    Avast and Prevx proved extremely reliable and compatible with everything I threw at them.
    Microsoft Security Essentials and Prevx have also proven very reliable and compatible.

    Avast Home free - stop any shields is not necessary except away from Standard, Web and network is working.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (Sometimes you have to temporarily turn off with the little icon to the left of the + bottom right of IE)

    Avast - stop home - free - all shields you do no need except leave Standard, Web and network running.
    (Double-click the blue icon - details look OK. - upper left Shields - those that you do not cancel).
    http://www.avast.com/eng/avast_4_home.html

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
    Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
    a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    ================================

    Your router may need a firmware update, but that would probably not produce
    bluescreens. And the rest can be processed after that AVG is out of the picture.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • The fan of my PC is strong and will not stop running

    Every time my pc fan would be hard for a few seconds and then stop.  It was beautiful, but now sometimes when I turn on my pc the noisy fan turns on and does not stop running. What could be the problem?

    I have a Dell studio D540 with windows vista home premium if it helps.

    Hi mobilquestion,

    That you still have a warranty valid then please contact the PC manufacturer and get the machine extracted. It is better to be safe than sorry, Yes, the problem will more than likely happen again. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

  • HP Photosmart and Microsoft Digital Image Suite 2006 will not start/run correctly

    I meet what I think, it's a security problem or software problem and I need help.

    I have Microsoft Digital Image Suite 2006 on my computer and a week ago, when I clicked on the icon to start the program, a message popped up box:

    Run as

    Current user (nameofcomputer\nameofowner)

    box with a check mark next to this statement: protect my computer and data from unauthorized program activity

    This option can prevent computer viruses from harming your computer or personal data, but selecting it might

    cause the program to function properly.

    My first thought was that the program had been corrupted by a virus or something, so I ran SpyZooka both Windows OneCare but they found nothing, and after that, I uninstalled Digital Image because I have the software and could re - install. I did all this and the program does not open and displays the above message. Then, he suddenly decided to let me do an edition on a picture but when I click on "save under" the entire program window has disappeared. That's what it is. I can get the program to open, but if I click on options such as you upload a photo or save an image, or if I click on 'Help' and try to look at the user manual, etc., the program immediately shuts down / disappears.

    Today, I decided to use HP Photosmart for the first time (since I installed the printer last week), edit a few photos. The first time I clicked on the icon, the program window appeared and I would like to look at the features and watch the video tour. I got to download the updates I needed and when I tried to open HP Photosmart subsequently, the above message appears and the program would not open/run.

    Help! What I did wrong to cause, it's a setting on my laptop? I don't know and all setting that I have authorized which would cause the message to appear with a check mark next to "protect my computer and data from unauthorized program activity.

    Your PC has XP?

    Here are some links I found by searching Help for you:

    http://blogs.msdn.com/aaron_margosis/archive/2004/06/23/163229.aspx

    http://blogs.msdn.com/aaron_margosis/archive/2004/09/10/227727.aspx

    It will be useful.

  • Satellite C850 - Windows 8 will not be updated

    Hi all

    Recently bought a Toshiba C850 laptop for my wife.
    Working in I.T the first thing I did was run windows update, it invites updates are available and starts to download.

    However, it is just eternally on 0%, I checked the download folder in the distribution of software and it fills up with updates, but the windows update screen never changes.
    I made some updates on the another victory of 8 machines on the same network so I know this isn't a problem with the internet.
    Have reset the pc by using the reset my pc to function within windows 8, tried again and still the same.
    A ran files hotfix microsoft... always the same support windows update.

    Even if I chose an update to download and install only for sticks to 0%.
    Deleted the contents of the folder dist\download software. picked up the update, this issue starts to fill up, but even after leaving, for 24 hours, its still on 0%

    Have reset all components of windows update, checked nothing uses the same port as the windows update server and still no luck.

    I noticed one thing, it is that if I try and stop the windows update service, and then the laptop everything grinds to a halt, it will begin to stop, however, then hang on the screen to stop.

    The only one, it was so he could stop completely must end the svchost.exe that's more critical system process related to the specific process that is running.

    Any ideas at all as I find myself with this laptop that will not update despite the set back to the factory settings.
    Concerning
    Sam

    Svchost.exe is a Windows internal process that hosts several Windows services (Internet Protocol is a part of the possible services)
    Because svchost.exe is used as a common system process, some malware often uses a "svchost.exe" process name to disguise herself.

    So maybe the laptop is affected by malware and therefore the update does not work correctly.
    Maybe you should try to repair or to reset the system of Windows 8?

    * Check that Windows 8 recovery & repair info: *.
    * http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm *.

Maybe you are looking for