Satellite P10 - start/stop down do not work

Similar Questions

• Satellite P10 - 554 dvd - ram does not work

  I got a Satellite P10 554, and as I said above the RAM does not work.
  It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
  It is impossible to install the new drivers or update a firmware somehow
  (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
  (firmware update: I still got the message: invalid drive to update f/w)

  I hope that someone of you can help me ;)

  Hello

  What did you mean with the work of t car doesn?
  You are not able to burn or read the media?

  The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

  Try to remove the drive from Device Manager, and then shut down the laptop.
  Usually after restarting again the operating system should recognize the drive again.
  If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

  It will be useful.

• Page Down does not work on Firefox

  Starting with 3.5.3 and continuing with 3.6 and Ubuntu last, the scroll wheel to move a website from top to bottom, but the keyboard commands Page UP and Page Down do not work. After hitting key a second time, he jumps off the page and press the top back to the top. In addition, a black flashing rectangle appears on the left side of the page. This will disappear when the user clicks on an empty space on the site.
  I thought to install the latest version of Ubuntu and the latest Firefox could solve the problem, but he persists.
  Any thoughts appreciated.

  Ted

  This has happened

  Each time Firefox opened

  Is see description above

  Try to hit F7.
  http://KB.mozillazine.org/accessibility.browsewithcaret

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• up down button not working properly

  Hello
  Suddenly my up/down/pgup not work correctly. If I press the arrow down, it goes at the end of the page if I press the up arrow, nothing happens. If I press the previous page he will jump a very small distance then jump down. This suite; happening on firefox please help

  Your list of details of the system shows that you have switched on the keyboard navigation.

  • Accessibility.browsewithcaret: True

  You can activate or switch by pressing F7 keyboard navigation (Mac: fn + F7).

  • Tools > Options > advanced > general > accessibility: [] "always use the cursor keys to navigate through the pages."
  • http://KB.mozillazine.org/accessibility.browsewithcaret

  Note that this is a function of Firefox Accessibility.

  • http://KB.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
  • http://KB.mozillazine.org/Accessibility_features_of_Firefox

• Satellite L650D-103 - USB ports do not work

  Hello

  I have a Satellite L650D-103 with usb ports not working only (no mouse, no printer) of a windows update 7.
  I tried a system restore, but it has not solved the problem.

  When I check the generic system card realtek controller is disabled.

  What can I do?
  Thank you for your help

  + The message was edited: post has been translated.

  Hello

  I recommend you remove the hubs and USB controllers in Device Manager.
  Expand the domain controller USB (in Device Manager), choose the USB devices - root - hub USB enhanced host controller, and press DELETE. This must be done for all devices listed there.

  Satellite L650D-103 was equipped with an AMD chipset.
  The chipset driver is part of the ATI display driver and that's why I recommend you to reinstall the ATI display driver again.

  Finally, restart the laptop and test the functionality of USB port.

• Satellite L500-128 - FN keys do not work with Win 7 64 bit

  Satellite L500-128 - FN keys do not work with the help of the operating system Windows 7 x 64

  Hello

  Satellite L500-128 belongs to the series of PSLJ3E.
  The European driver Toshiba page contains all drivers for this unit.

  Next to the installation of value-added package, you will need to install the Flash Cards Support utility v 1.63.0.4.
  Buttons controls the FN Flash Cards!

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Satellite P10 554 stops after a few minutes and I can not restart

  Hello
  I hope someone can help me with my satellite P10 554
  When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.

  I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!

  Help me please, cause I need my phone to work!

  Hello

  From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.

  I put t know how are you familiar with this, but if you have no experience don t do it alone.

• Start/stop button doesn't work is not on Windows 7-HELP - GOING CRAZY!

  Please help if you can. I'm going crazy trying to solve this problem.

  Recently, I made some recommended system updates. Part of the update requires that you restart the computer after the updates. My laptop will not allow absolutely not me to put back in operation or stop my system... only put into hibernation.

  I have done research on corrections and tried several unsuccessful. My last hope was to run the "clean boot" for windows 7, I did, but in the end when it should have restarted I got an error box that says "the System Configuration cannot restart the computer.

  What can I do? I think that my system does not work properly because it has not been restarted because all updates have been loaded. Is there a solution?

  Thanks in advance!

  Hi Kristi,

  Have you tried to do a hard shutdown and restart the computer?

  If you have not done a hard reboot by manually turning off the power button on CPU, I suggest you to try and see if the problem still occurs.

  If you still experience the problem, then follow these methods:

  Method 1:

  Check out the link and run the Troubleshooter:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If the problem is not resolved, I suggest you refer to the article and change what happens when you press the power button on your computer:

  http://Windows.Microsoft.com/en-in/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Let us know the results.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite P10 - 832---> stops

  Hello
  Since a few weeks my Satellite P10 stops suddenly
  It comes up with
  (1) battery
  (2) AC adapter
  (3) battery + AC adapter
  Why?
  I downloaded a bios update but it's always the same
  I formated 3 times, without making all internet connections (someone told me it could be a virus from the internet), but she stops even if the OS is just formatted and empty (with an antivirus)
  I checked my CPU temperatures and I saw that he could stop down to 36 ° C or 39 °... or work the best at 43 ° C!
  (so I have eliminated a problem of temperature)
  But I saw that when the CPU USAGE exceeds the 50% the rest machine for a few seconds or minutes (if I'm lucky!)... .then shut downs, once again!
  The same problem is happening to one of my friends, with the same computer!
  I can't play video games or do a full with my because antivirus scan that the CPU USAGE is over 50%!
  Is this a hardware problem?
  Thank you
  Jacopo
  (Also have Win XP H.E.\SP2\Norton Antivirus 2004\Zone alarm Firewall\Microsoft Anti-Spyware)
  (Sorry for my rude English!)

  Hello

  It is not easy to tell what the problem may be, but in my opinion there are too many processes that run in the background and the processor is at the limit. In this laptop case closed. It is the protection mechanism. Laptop to stop before the processor may be damaged.

  Also, I had similar problem the spirit of my laptop. After the installation of the antivirus, the laptop was so slow that it was impossible to use it properly. You can try to remove Norton and try again.

  Please inform me if there are a few changes. I am very interesting about this.

  By

• Satellite U920T-117 - touch screen does not work & off restarts

  Just opened my new u920t-117, my first time buying a Toshiba, 5 mins in and excitement began to turn to you to worry.

  I really hope that its makes me something simple, bad, or at worst a software problem.

  At no time the touch function works (either in tablet mode or laptop).
  In the--> system under Pen & Touch Panel it says "no net or touch entry is available for this view ' as my last computer that had no touch screen.

  This means - there is a problem with the driver, or something.

  It also appears when I click on stop down it stops down and 5 seconds later starts again.

  Hi stephen

  > I really hope that its hurts me something simple, or at worst a software issue.

  I'm afraid the worst cases are a hardware malfunction, and I guess that your contact U920T Satellite malfunctions of the screen.

  I read in another thread about the similar problem, and it seems that service engineers must be contacted in order to solve these problems of touchscreen.

  I don't know if you could ask your dealer for a replacement unit but in the case where the dealer replace the laptop, get in touch with a Toshiba ASP your country to fix.

• Satellite 2430: CD/DVD drive does not work - i/o error

  Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
  F:\ is not accessible.
  The request could not be performed because of an i/o error.

  I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

  Begging you a lot
  Michael Borger

  In my view BIOS update will not change.
  I assume that the reader has worked in the past with the same BIOS version
  It is a drive hardware problem or some registry keys are corrupt.

  I think that it s a hardware malfunction may be a matter of lenses.
  But try this;
  Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

  Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
  The firmware should again loads.

  But if these procedures help t, I don t see it differently as for replace the drive