Satellite P100-160: could not get the proper functioning

Similar Questions

• Satellite L10 - 195 - could not get the WIFI connection to the internet

  Hello

  I downloaded and installed the latest dirvers for wireless cards and EThernet for my laptop but I can not get the wireless to connect to the internet!
  Please help me before I crush my laptop. :]

  Thanx

  PS: Anyone know if there is one special way (other than the function keys) to swith the wireless on?

  Hello

  This may be a stupid answer, but on my laptop there is a switch on the front of the laptop that needs to be enabled for the wireless work. I saw this as a first step, and it doesn't seem to be well documented. Good luck.

• Satellite A200-1ax: could not get the BT working on Win XP

  Hello

  I have a Toshiba laptop satellite a200-1ax. I installed Windows XP sp2.
  My problem is that I can't get the bluetooth work. I have installed a Toshiba bluetooth driver and nothing. When I try to install the bluetooth stack Toshiba the instalation stops at the driver part and won't. I tried, and left for more than 2 hours and it was not moving.

  When I opened my device manager there is no place where a bluetooth connection is mentioned. In the bluetooth of the 5 information system services where collapsed and to manual start. I tried to start manually services.msc, but there was no available bluetooth service.

  You have to add that I have 3 elements in with question marks Device Manager:
  1. mass storage controller
  2. feature modem on high definition audio bus
  3 PCI memory controller.

  If anyone can help with the problem of bluetooth, or three missing drivers, please do :)

  Hello

  The Bluetooth should work!
  The laptop supports the BT module, and I think that you have not properly installed.

  Firstly don mix t the monitor BT with BT stack. You need the BT stack!
  I think that you should remove the software BT OS and after that new reboot should try to reinstall again.

  Then you must enable BT using the Fn + F8 key to complete the configuration of BT!

  Other devices such as PCI memory controller and mass storage controller. Are not supported by Windows XP and therefore there is no drivers!

• Satellite P100 PSPAD: could not update the BIOS 3.8 and a poor video performance

  Hello

  I have a video performance of bad quality on my machine as well as the fan power of the issues.

  To add to my frustration the WinPhlash program included in the BIOS version 3.8 empty out trying to flash which gives a PHLASHNT. SYS failed to load the message with different error codes (codes 5 and 147 depending if I launch the exe, as it is extracted from the ZIP, or run the files extracted independently).

  I checked all permissionings on the record and I definitely full control - but still a generic message of "check your accounts, if you do not have permissions please log in again!" is displayed.

  help with my problem of BIOS would be apreciated.

  [Edited by: admin on July 6, 2007 11:10]

  Hello

  but as the average it s absolutely the safest office upgrade firmware on at the level of the BACK. Or at least using the UBCD4Win, which is a beautiful cd live windows for maintenance.

  Welcome them

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

  Hello
  
  We have integrated our portal customized with the AAU in document taskflows webcenter application.
  We are not able to view the Soum, extracted from the Complutense University of MADRID. Here's the error to get connected UCM whenever we access the application.
  
  Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference. Can not read the file. [Details]
  An error has occurred. The stack trace below shows more information.
  
  ! csUserEventMessage, anonymous, CIS! $! csCollectionUnableToGetReference! csCollectionCannotRead
  intradoc.common.ServiceException:! csCollectionUnableToGetReference! csCollectionCannotRead
  * ScriptStack COLLECTION_GET_REFERENCE
  3:getReferenceMeta, * no captured values *.
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
  at intradoc.server.Service.buildServiceException(Service.java:2260)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
  Collections. CollectionUserHandler.getReferenceMeta (CollectionUserHandler.java:1765)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:600)
  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
  at intradoc.server.Service.doCodeEx(Service.java:533)
  at intradoc.server.Service.doCode(Service.java:505)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
  at intradoc.server.Service.doAction(Service.java:477)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
  at intradoc.server.Service.doActions(Service.java:472)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
  at intradoc.server.Service.executeActions(Service.java:458)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
  at intradoc.server.Service.doRequest(Service.java:1890)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  Kind regards
  Francis P

  What is the security group of your records? It is public.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• Spore origans. But they could not get the disc to download

  Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download

  Windows 7 Edition home premium

  Hello

  EA Spore games are you referring?

  If you are referring to the games EA Spore, I suggest you check the link for support:

  https://help.EA.com/en/spore?sso_redirect=1

• •EPMCSS-05261: could not get the information of the Aboriginal group.

  Hello

  Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

  I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

  «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

  Please could you let me know why we get this error message and no impact on the safety of the user.

  Thank you

  Michel K

  Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

  See you soon

  John

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite

  Try to update CC 2015 without success.  Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite.  Any ideas?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  -U44 more... discussion http://forums.adobe.com/thread/1275963

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

  "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

  I received this message during indexing on my computer.  I could not get the message, so I

  uninstalled Adobe.

  After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

  Then I tried to re - install Adobe, but who has turned to a complicated procedure.

  There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

  After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

  When I try to open the program by clicking on it, I get the above message.

  I went to the site of help from Adobe and read a complex string of instructions, including

  words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

  Needless to say that the instructions were no help.

  I said all that to say this.  I want that my computer back.  What should I do to do?

  Sincerely,

  Ralph Thompson

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  This may help: Application, file icons change in Acrobat/Reader icon

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.