Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

Similar Questions

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• HP dv6 6c98sa - switchable graphics - AMD Radeon 7470 m does not work after installing Windows 8

  As per the title, I upgraded my Windows 7 Home Premium 64 - bit of Windows 8 Pro 64 bit, of course according to a lot of discussions here (which I've read through) the AMD Radeon stops working.

  I had it running using some Toshiba drivers which I can't make it work again since I did a new install of Windows 8 last night (I love not upgrades, the plan was to run the upgrade to make sure no problem then do a clean at a later installation) - FAIL!

  With the standard driver for Windows 8 my machine has an AMD Radeon HD 7400 m (Microsoft Corporation WDDM v1.20), but it starts like, or should I say fails to start and display the following error message "Windows has stopped this device because it has reported problems. (Code 43) ».  If I turn off the device and restart, then it does not show an error and says it's working very well, I'm not sure it's good.

  AMD Radeon 7470 m (PCI\VEN_1002 & DEV_6760 & SUBSYS_185D103C & REV_00)

  and Intel HD Graphics 3000 (PCI VEN_8086 & DEV_0116 & SUBSYS_185D103C & REV_09)

  The Intel HD Graphics 3000 is running driver version 9.17.10.2875 (17/10/2012), which I have updated via the utility Intel drivers update last night.

  Any help would be appreciated.

  I've used - ftp://ftp.hp.com/pub/softpaq/sp55001-55500/sp55092.exe

  Works fine now :-)

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Satellite P100-160 - system does not boot

  Hi all

  I was hoping someone may be able to help me with a problem I have with my Satellite P100-160.
  I was using it the other night without power connected when my battery ran out and he stopped.
  When I reconnected the power and it works I got the usual message asking if I wanted to start as normal I did.
  To do this i Gets the icon in the lower right corner telling me the system was trying to install a new mass storage device driver.

  He couldn't find it and I haven't added or removed something in my system.
  When I stopped and went to the re - start the next time, I received a message on the start screen in the sense of:
  error
  conflict of resources - controllers USB bus pci motherboard bus: 0a, device: function 04:01

  error
  resource conflict - controller mass storage of the pci on motherboard bus: 0a, device 04 function 02

  error
  resources - bus pci motherboard conflict: 0a, device: 04, function 03

  Press F1 to resume F2 to Setup

  I cannot go into the installer, but if I take the system just hangs and stop all the hard disk activity. I have managed to do successfully start once but no more, can't get into safe mode or anything. When I have it at my local computer store the guy he looked the error and said: it's broken, the motherboard has gone and there is nothing I can do with it. Im very disappointed that the laptop is only 2 years old and I would have thought that it would last longer than that.

  So my question s are the right guys, it's broken or is there something that can be done with it? If it is broken I can access the contents of my hard drive with another laptop (the guy from the store said something on to using a hard disk enclosure and use it as an external hard drive?)

  Thanks in advance for any advice

  D

  Hello

  It seems that the motherboard is affected
  In the message error - bus motherboard pci resource conflict: 0a, device: 04, function 03 the motherboard is mentioned, so everything looks like motherboard failure.
  But to be 100% sure you should ask the authorized Toshiba service provider of the opinion.

  Good luck

• Power of the Satellite P100-240 unit does not work properly

  From time to time my power (PA2521E - 2AC3) unit starts beeping and stops the power get to the computer, forcing it to drain the battery.
  Summer happening for several weeks now and sometimes it stops itself, but other times I have to put my diet off for hours and keep checking to see if the beep stopped.
  It does not overheat as I only for about 30 minutes before it starts to beep.
  If I turn off feeding the continuous ringing for a few seconds before disappearing for good.

  What is - this and I should send it back?

  Hello

  I never heard that the AC adapter would do some sounds or would start beeping
  In my opinion it of not normal and the adapter must be verified.

  You should definitely contact the ASP (authorized service provider) in your country to control and perhaps this part needs to be replaced

  I think the warranty is valid at the moment and the replacement is done for free

  Good luck

• Keyboard Satellite P100-190 number does not

  My keypad does not work, even thought the numlock light on.

  For these days, the numlock was constantly on - it is not possible to turn off - but the numbers or functions will not work?

  Everyone knows this? I did a system restore to before it started to happed, tono available.

  I would like ideas on how to solve this problem.

  Thank you

  Connect the keyboard to check usb external... If it works, something wrong with the hardware. If doesn't, it Os related issue.

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Re: Satellite L20-112 - WLan does not work after installing Win XP

  Hello

  I reinstalled Win XP on my old laptop, and all my drivers disappear.
  I downloaded all the drivers on the official website of Toshiba, and unfortunately the wifi does not work.

  My Notebook: satellite l20 - 112 psl2xe, win xp sp3, sticker for computer laptop-atheros WiFi-.

  Thank you in advance.

  Hello

  This means that you need a WLan driver or what do you exactly by wifi does not work?

  Do you know what WLan card you have exactly?
  You could install the hardware like Everest Home Edition diagnostic tool which would provide information on the WiFi chip.

  PS: Here are all of the WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite L500 - FN + F6/F7 does not work after installing Windows 7 SP1

  After installation of SP1 on Windows 7 64 bit does not work the screen brightness setting! 1.4.1 for Windows 7 64-bit installation Toshiba value added Package not help!

  Need help!

  Hey Buddy,

  > Installation of Toshiba Value Added Package 1.4.1 for Windows 7 64-bit no help!
  You have also all-new version of the Flash Cards Support utility? This tool is also necasary for the FN key function and can be downloaded on the Toshiba page too.

  Check this box!

• Satellite 2400 - 103: sound does not work after installing SP2

  Hello!
  I had to install Windows XP Service Pack 2 to keep my Windows Update. Unfortunately, my audio device does no more work because XP is considered a potential threat.
  When first, I installed SP2 last year and saw that I had no sound on my PC, I just uninstalled it because I didn't know what to do for my sound card.
  Now that I have to install it, I must do something for this sound card (as a music lover, I am not not to be able to listen to it).

  Could you please tell me if Toshiba has created a code for this problem? The devices dialog box tell a Code 48. I'll contact Yamaha?
  Thanks a lot ofr your answers.
  Good bye
  Catherine

  Hello

  Have you checked the page of the Toshiba driver to update the audio driver?
  If this isn't the case, then do it!
  I visited this site and find a sound driver of Yamaha. The update is on 14/01/05 and all other drivers are since 2002. So I guess that the audio driver has been updated on the page.

  So download the driver and install it on your laptop!

  Good luck

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• Satellite L305D - Touchpad does not work after installing Windows 7

  I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

  I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

  Here are the specs of my model:

  PC x 86 ACPI
  64-bit AMD Turion X 2 processor
  ATI Radeon 3100 graphics card
  Synaptics PS/2 Port TouchPad

  I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.