Satellite P100-216: V20 EDR Bluetooth adapter not supported?

Similar Questions

• Satellite P100-216 - power adapter continues to whistle and does not load

  Recently the adapter (black box on the AC power cord) on my satellite P100 began to whistle and does not charge the laptop, the machine worked that for about an hour and a half, then don't would not have thought that it was getting hot,

  any thoughts?

  Hello

  For me, it looks like a malfunction of AC adapter.
  I think that the cable must be broken, due to the fact that the adapter keeps whistling.

  I can give you only one advice; the adapter needs to be replaced!
  In this case, you should contact the ASP in your country and should ask for help.

  I m guys has can help you.

  Best regards

• Replacement of GPU on Satellite P100-216

  I joined this forum on behalf of my brother who lives in Turkey. He took with him to England a Satellite P100-216 laptop.
  He had problems with him and he took to a workshop in Turkey to tell the graphics card needs to be replaced and the installer had problems to make a. He suggested to one of the United Kingdom and next time someone visits, they can take the card to the Turkey. I live in England and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  Could someone advise me if this is the case. If it s not integrated, y at - it another card that would fit. It only play hidden object games, so I doubt that he would need a top spec.
  Any information would be very useful and I thank in advance for the help

  Hi dude

  You shouldn't be disappointed. The forum is a user to user forum.
  If others think they might be able to help then they will post here in this thread.

  > I live in the United Kingdom and also told me of a repair shop here that the card is integrated on the motherboard, and it cannot be replaced, it s not worth repair.

  That s right the GPU is a part of the mobo and if the GPU would be defective, then you need to replace the motherboard. But the new motherboard is not cheap, so maybe better to buy a second hand laptop before getting the mobo replaced.

  PS: as you can see that it is a user to user forum... maybe other users expect a notice from you too as you did too, so to be part of the community and try to help others also...

  Welcomes :) and welcome to our community

• Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

  Hello guys,.

  I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

  It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

  The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

  Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

  Any advice would be much appreciated.

  Kind regards

  It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

  Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
  I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

  As compatible modules, you can use
  TOSHIBA
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

  Kingston
  KTT533D2 / 2G 2GB 533 MHz Module
  KTT667D2 / 2G 2GB 667 MHz Module

  On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Bye and good luck.

• Satellite P100-277 by clicking on adapter and do not start

  My Satellite P100 does strange things. First it does not start at the top (the first time after it has switched mode all of a sudden, the second time, it's just did not start at the beginning of sleep), unless I removed the battery for an hour, and second the adapter makes a clicking sound when it is on the electronic card. Help! Who has an answer to this problem.

  Hello

  I don't think that the technician can help you
  What do you think???

  You said that the AC adapter makes strange noises?
  The adapter is maybe defective and dysfunctions and this may affect the functionality of the laptop

• Jabra A320s Bluetooth adapter not recognized by Toshiba Stack

  Hello, I have a Jabra A320s Bluetooth adapter (Broadcom Bluetooth 2.0 EDR dongle) and after the installation of the battery of Toshiba Bt 5.0.1 for Vista does not recognize my device. Ask me every time "If please, plug the Bluetooth device and click on the Ok button" and my Bluetooth device is pluged. I have no problem with my adapter Linksys Bluetooth 1.1. Also, I previously installed stack Broadcom and the drivers for my Jabra A320s (obviously, I now prefer the Toshiba one), I uninstalled it and I got the same message "Please plug in the Bluetooth device and click on the Ok button" configure the stack of BT from Toshiba. Can someone help me?

  Hello

  This seems to be a problem of the current Release v5.10.01. This will install only on the internal modules.
  In order to work properly, you must first install v4.xx.xx. After that your can reinstall v5.xx.xx without problems.
  This way I got it on my side.

  CU
  DM

• Satellite P100-160 - several PCI bus do not work with a shadow video BIOS

  Hello

  I got my Satellite P100-160 for about five years now and have never had any problems like this before.
  A few weeks ago my system did not (or something like that), so I pressed the power down button to turn it off.
  Then, as he was put on, he seemed to freeze on the loading page and so I held the off button again.

  The present results are when I turn it on, I get a screen telling me several bus PCI etc do not work and he says 'video occult BIOS.
  I then have the option to press F1 to resume or F2 to enter setup.

  In addition, one of my USB slots has completely stopped working and my card slot has also stopped working.
  Can someone help me please? I'm on Windows XP, SP2.

  See you soon,.
  Liam

  Hello

  I think that you need to access the BIOS (press F2 when the laptop starts up) and put its default value.
  Then try to start the Vista again and press F8.
  Then you will get a menu of advanced start it you should choose repair computer.
  Vista supports a clean internal repair option, you should try this and must repair the operating system.

  If this will not help and you still want to not be able to start a view, then a system recovery may be the best option for you

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• X 230 Bluetooth adapter not detected on Windows 10

  I recently had the X 230 device I use put to level 10 Windows to a new facility (does not pass Lenovo restore feature). Since then, I noticed that I am no longer able to activate or to detect the bluetooth adapter after the upgrade. I tried to download the drivers, but also for Windows 10 but still power management software could activate / not detect. Things I noticed:

  1. There is no mention of a bluetooth Device Manager device (or as a category of bluetooth, nor as a network adapter.
  2. Performing with Fn + F5 does not work as it is the switch of the machine in airplane mode. Press them will take the machine off of airplane mode. (I also installed the hotkey software).

  I used to be able to manage wifi and bluetooth devices using wireless Lenovo return assistance when I was still with Windows 7 if the material is "absolutely" there.

  Thoughts? Thanks in advance for the help!

  OK, so I was able to solve my problem of bluetooth in upgradinv the BIOS/UEFI with the latest firmware. After a reboot, voila! The bluetooth device has been detected. Now, the interesting thing is that there is no option to turn off the radio, unless disable you it in Device Manager.

• Satellite L750 - 22 X - battery plugged in, not supported

  Hello

  I bought a refurb L750 of Curry / PCWorld back in October 2012.

  As soon as I came home, unboxed and hooked up my laptop I noticed that my battery status is ' 0% available (plugged in, does not support).
  I tried to restart, unplug / reconnect, etc..

  I took it in less than an hour of purchase and the guy looked and "fixed".
  He said he looked on the forums of Toshiba and I saw there was a driver problem that caused this problem.

  Problem is that this question came back as of today and I can't find the solution.

  Any help would be appreciated, thanks!

  Concerning

  Hello

  Have you tried to calibrate the battery?
  Disconnect the power adapter and keep the laptop the power from the battery-powered only.
  The battery must be completely discharged.
  Then plug the AC adapter and check if the battery is charged.

• "Bluetooth is not supported by any version of windows servers... what exactly does that mean?

  I am trying to set up a bluetooth connection between my mobile (Nokia X 6) and the new Acer lap top of page that is running windows 7.  In the past, when using Vista and my Samsung phone it was easy through "control panel."  With this new Windows7 however, it does seem to be an option to set up bluetooth.  There is however "help" a section ' how to set up bluetooth or other wireless connections, which begins by saying that you can transfer information via bluetooth and other wireless means, he then goes on to describe these "other" methods wireless, adding a note that "Bluetooth is is not supported by any version of windows server.  The lap top itself has a long side button Wi - Fi bluetooth button, which don't "turn on" or turn on when I press on it.  I'm not very technical interest and just use the computer for my music and photo organizing and other simple functions.  Apologies if it sounds ridiculous, but I think I'm getting conflicting information, is always available for use with windows bluetooth 7, if so does that mean say "he is not supported by windows servers?  I just want to know if I forget something really obvious or if I should stop trying altogether with all bluetooth and focuss on other file transfer methods?  All the advice in plain language or pointing me in the right direction will be so appreciated, thank you very much Frances

  Turn off the laptop and look at the bottom of this one.  If it doesn't have Bluetooth installed, there will be a white sticker with BLUETOOTH printed on it.

  You don't have an edition of Windows Server.  Those who would be Windows Server 2003, Windows Server 2003 R2, Windows Server 2008 and Windows Server 2008 R2 and a bit like Vista and Windows 7, they come in many varieties, Web, Standard, Enterprise, data and 32 and 64-bit editions.

  When you go into the Control Panel, you see an icon for Bluetooth?  Bluetooth does appear in Device Manager?

• ESXi 4 on Asus P6T SE with Intel Pro/100 S - adapter not supported?

  I saw some of these threads, but none have quite answer my question. I set up an office whitebox with plans to use it for virtualization with VMWare ESXi 4. The Office currently has a motherboard Asus P6T SE and the following specifications:

  • Intel LGA1366 platform

  • Intel® X 58 / ICH10R chipset

  • Intel I-920

  • 6 GB Kingston memory

  • Intel Pro/100 S network map.

  Installation seems to be going along great, but the trainwrecks right then the detection of network card saying "not supported network adapter. I read on the HCL\HCG for VMWare ESXi4 and I found that the onboard Realtek NIC is not supported. I bought a Linksys NIC, who did not, and then as a last attempt got a card Intel Pro/100 S, thinking that this stripped NIC would pass, but unfortunately none have worked. I have of course buying an Intel Pro/1000 card, but I think that if the Pro/100 will not work, a Pro/1000 won't work either.

  I tried to change the PCI to IDE to AHCI and activation settings and disabling the NETWORK interface integrated without success. I don't know what else to try, and I rather wouldn't VMWare Server because it seems like a waste of resources to put Windows on this thing.

  I ran before ESXi on Dell servers and I an ESX cluster at work that I built on two HP DL280 G6s, but I don't want the noise of a complete server in my house.

  Anyone got past this problem yet?

  Hello

  Check carefully this message to get a network card compatible esxi 4.

  In esxi installation stage, you need a compatible network card that is present on the host computer. Is a good idea to disable all NICs not supported, then just left active management (s).

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• Re: Satellite A500 (PSAR9E) battery - plugged in, does not support

  Yesterday, I noticed that my battery is at 74% - plugged in but not charging. Laptop not working ok, no problem.
  Before this problem occurred, I started it upward, he worked for 10 minutes on the battery without connected charger.

  Then it just stops what it self. I thought that maybe the battery was low so I plugged it on. After a while, I noticed that it does not load, I have it plugged into power-it shuts down as there is no current battery. Tried to remove the battery, plugged into the cable from the Jack, put back them, the battery cable, it starts and still nothing... Today it of about 72% and still does not support... Laptop is 2 years old. Battery has been working great until now.

  Please help if you know the solution, thank you!

  What to say?

  Start the laptop without battery and when the windows are fully charged put the battery in place.
  I imagine that the battery will be recognized correctly. Is the same situation when this happens?

  It will be interesting to know how it works with a new battery. At the moment, we can say more about it. The problem is battery or maybe electronic power?

  It is not easy to say what the problem is here.

• Satellite 1800-400 and USB Bluetooth adapter

  I ask a large part of this laptop, on the installation of the software for the adapter and re-boot to complete installation, the computer comes up with a fatal error about a dll file, it happens that fast I can't get all the details.
  Anyone with any experience to get bluetooth to work

  Map detail:
  Bluetooth V1.2
  IVT Bluesoleil (class 2)

  Hello

  Get Bluetooth to work is not a problem if the BT is installed correctly. In my opinion, you should check the s manuals and install the appliance as described. Maybe the software must be installed first, before that the USB key must be added.

  On this path, it's really not easy to give you concrete advice, because you use software and third-party material.

  If you want to check also producer support page.

  Good luck!

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again