Satellite P100-221: DVD Super Multi DL drive does not work properly
Hello world!!!
the problem is that one day I inserted my CD - RW in drive, launched Nero but failed to remove any previously saved data of him cause I couldn't push the button 'clean' (sorry, not sure he's called this version in English).
In my computer, where all readers are collected, in the context menu for my drive I couldn't find option to erase the disk. In the properties of the label record disappered (label where I could mark the box: Alow CD recording).
I also tried to burn many Cd - R with nero, I recorded using multisession with a small amount of data, but after this, I was not able to record something on their cause, they have all been closed and developed, too, I told nero ot not to develop.
Maybe someone can help me, I don't want to reinstall windows.
Hello
I think that this is not a drive problem but possible it s more a configuration issue between Nero and second burning software.
I think on many laptops Toshiba sound recording has now been installed.
This software can be used for disc erasing and finalization.
Please check the application.
I put t don't know if this helps but maybe when you remove the sound recording now Nero does not improve.
Tags: Toshiba
Similar Questions
-
Satellite pro 6100: DVD - ROM SD - 2612 C does not work properly
Hello!
The image flashes with the ordinary WinDVD.
When I install the interactual Player 2.7 real. (I was very happy with version 2.0 on my old toshiba laptop for win98), the same phenomenon occurs, too - but there is no sound at all...Interesting fact: DREAMWORKS Animation Film "Over the hedge" works without problem screen at all, but: no sound...
does anyone have an idea?
A download?
Thank you!
Hello
Have you tested WinDVD player with several different original DVD movies?
Check it!You should also test different DVD player. I recommend VLC Player. It's free!
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Carpet * a DVD - RAM in Sat M55-325 drive does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0
I have RecordNow from Sonic/Roxio which is preinstalled on the computer.What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
Hello
Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft
I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.
-
Sat 1900 - CD/DVD drive does not work properly. How to solve this?
Hello :-)
I have a Toshiba Satellite 1900, bought in 2003. It has a cd/dvd drive called MAST * UJDA720.
For the last 3-4 months he was not working properly with movie DVDs. whenever a movie starts, it does not work smoothly, but in stop-and-go. First of all, I had everything again and it works fine, but lately, he never runs well and some DVD doesn't work well at all. Excuse me it I do not explain, I don't have the words in English.
But maybe someone understands me and can help. My DVD player is dirty? Is there something like a standard CD? Or do I have to give the laptop to a repair shop?
Thank you in advance, I would like to have my DVD player, back to normal - especially as I don't have a TV.
concerning
KimbazuluHello, Kerstin
If you can watch the DVD on the unit I don't think the drive is defective. I have the same unit and still work well. Stop and go while playing DVDs can be caused due to the high utilization of the processor.
Please try to start the Task Manager and check all running processes. All unnecessary processes can be stopped and on this way, the CPU will go to a lower level. If the antivir software is installed on your unit checking if this software analyzes the HARD disk and stop it.
These things together can be responsible for stop and go while playing DVD movies.
Good bye
-
Sony DVD RW DW - Q85A Driver does not work
We have a relatively old Sony Vaio (VGN-FS485B) with Windows XP operating system. The topic CD/DVD driver (RW-DW-Q85A) does not work and the State of the specified device is the following: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Unable to overcome difficulties following procedure of Troubleshooting Device Manager.
Grateful for any advice.
This article can help...
http://support.Microsoft.com/kb/314060
Tricky
-
Satellite L30 PSL33: Link to the display driver does not work
I'm trying to download displey drivers but the link does not work
Satellite L30 PSL33
http://ru.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ruI use dial-up/modem
> I'm using modem dial-up /: D
Maybe it's too slow sI checked the Power Saver link and this tool can be downloaded.
Therefore recommend that you check it again! -
Portege Z930 - display driver does not work properly
Hello
We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.
First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.
Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.
On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).
In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.
We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.
So, how can we get this working properly?
Thanks in advance and best regards,
N. CochemsMore importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).
It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.
Verify that the Intel drivers are installed properly in Device Manager.
-
The Cam Driver does not work properly
Hello my product no model is hp 15-r015tu and I download all drivers, but there are still my cam does not
When the youcam driver install in my lappy there give me something error.then missing in driver pack
My OS is win-7 ultimate 64-bit
Hello @JACK_0301 ,
Welcome to the HP Forums!
I understand that the webcam on your HP Pavilion 15 laptop does not work.
Please make sure that you use the following download to install the CyberLink YouCam software for your notebook: Cyberlink YouCam software.
Can you please tell me if there is a version of the currently installed YouCam software and the webcam works in this software?
Also, check in Device Manager for devices of imagery for any conflict with the webcam. It should display with no X,!, or? symbols on the appliance.
You can also restore the laptop to before the show began. You can do this by tapping F11, while the laptop turns on to access the HP Recovery Manager and selecting the restore option.
Let me know if it works!
-
External hard drive does not work properly
Hi all
It is a slightly different external HARD drive problem. I had my faithful media ATMT bin since my first laptop with XP (2003) and I bought it in 2005. It's a little wobbly as the fan vibrates a lot, but this isn't a problem. What is the problem, is that I have a windows machine 7 who thinks that drive a need to put in shape, but my previous laptop which has vista on it was absolutely no problem to read the files IN ALL and you can open one of them without a hitch. I tried to run CHKDSK I:\I (it is labeled as the I drive :) and 7 claims that it is in the format RAW. I had a look at CHKDSK on my old machine and it is in FAT32, I since changed it to NTFS, but seems to have no effect. I also tried the hunting of the drivers for the external hard drive, but I come only through links to Amazon as these things are always available.
I really need to access this drive on my current computer as the older one needs a considerable cooling method to make it work therefore the latest machine. What I also don't understand, it's that it was working absolutely fine on this machine too until quite recently. He worked on it that I need, but have not been accessed for a while and so solutions in this regard would be greatly appreciated.
Thank you very much for your time.
RM
Your drive has reached its copy by date and it works on time taken (if he is stil)
If this does not work on another PC then it's probably dead.
You can try the utility disk SeaTools from Seagate to check and see if it can detect and report on the drive
-
Carpet * a DVD - RAM in Satellite A100 drive does not work properly
When I insert any type of disc, the drive lights up, but the system cannot access anything on the disc. I tried all the fixes that were shown in the forums, but nothing works. The message I get is: D: / is not accessible. I/o device error. Oddly enough the only disc it reads without any problems is the recovery disk. Unfortunately, a system recovery didn't solve the problem.
Hello
If you're still guaranteed then it would be necessary in your case bring/send your machine to a local toshiba for a hardwarecheckup servicepartner. But even if Don t you out of warranty you should do it because your questions sounds like a hardware failure.
If you need help finding a service partner so I can give you a link where you can find one that is closest:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and good weekend
Welcome them -
Satellite P100-324 - GPU overheating due to fan does not work in the operating system
Hello world.
While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.
Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.
The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.
This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.
Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).
I saw in your other thread that you have updated the BIOS and you have installed several different OS.
Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.Best regards
-
Portege R100 hard drive does not work properly
Hello
Recently, my computer suddenly started working slowly. I restarted. Then it took 25 minutes for lunch my windows xp Pro. Whenever I tried to launch an app he bugged and restarted again. After scandisk, I decided to reinstall my operating system with the recovery CD, but the computer still runs slowly. For example, when I opened Internet Explorer, I can't move the mouse or do something else while it's loading the content of the page. everything is locked.When I tried to run the scandisk, I have the same error (but the folder is always different) like these examples:
1 Disk Defragmenter cannot continue prescan because there is CORRUPTION in file:
C:\WINDOWS\PCHealth\HelpCtr\System\SCRIPTS2 Disk Defragmenter cannot continue prescan because there is CORRUPTION in file:
C:\WINDOWS\SYSTEM32\OOBE\HTML\SDLMAINWhat can be the problem? What is a virus or a hardware problem?
Before beginning the new installation, you can try to repair the system files on the HARD drive.
-Run CMD
-use the command chkdsk/p or chkdsk/r.For more details of command, you can run chkdsk /? or chkdsk/Help
But as mentioned above, is the new operating system installation is without danger, but don t forget to make a backup if you use important and data files on the HARD drive ;)
-
Upgrade to vista SP2 and now a driver does not work properly, and my web cam does not work
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
Hey zanalder
If your webcam is integrated into a laptop hp you get all the drivers for hp
http://welcome.HP.com/country/us/en/support.html
If you have a desktop computer with a separate webcam go on webcam manufacturers website and look for the webcam software
Walter, the time zone traveller
Maybe you are looking for
-
Does anyone have info on whats going on with this update. I read all the problems with this update, and none applies to my problem. 'YOU ALREADY INSTALLED PROGRAM' WTF WHY HE KEPT COMING BACK AS A RECOMMENDED INSTALLATION IF I HAVE ALREADY INSTALLED?
-
Pavilion function keys model 11-n083sa
I use the software called RPG Maker VX Ace to write games. The software uses the function keys of the Tablet for various things. For example F12 to perform a test and so on. The problem is that the Tablet comes with its own functions - F12 allows on
-
Toshiba 305j - control computer does not checksum of the file.
Changed the cmos battery and still get the same error code. Cannot boot from the recovery disc. Help!
-
BlackBerry Smartphones No. BIS until what to do!
Hello, I live in the Qatar, we got an operator called Vodafone Qatar, which is registered to Vodafone Group plc, and I think that all the knowes it while the operator does not have BIS they keep telling us that we strive Rim service contracts there i
-
Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.
New installation of Win 7 Home Premium, Compaq Presario SR2177CL. AMD X 2 3800 + 2 GHz Dual-Core CPU 1 GB of DDR2 Ram (2 x 512) HDD Sata 200 GB WD After a clean, led installation to all updates MS blue screens started. MemTest 86 +: pass HARD drive t