Satellite P100 - 232 (PSPA6E): after Vista Installation not cooling

Similar Questions

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Satellite P100-442 - sound after Vista update problem

  Vista Home Premium operating system.

  Since "Vista Update" installed a pilot of its new "Conexant high definition SmartAudio HD2", the sound does not work.
  It does that after I do a "ch for devices modified" via "Device Manager".
  But I do whenever I have start the laptop.
  Should I first remove this driver (and how?) and to install the driver on the Toshiba site?

  Try to restore to an earlier time using System Restore option.

  If everything works again DO NOT install updates for ALL pilot rating. Just install update marked as important. All others (optional) update SHOULD NOT be installed at all.

• Satellite P100 - 324 PSPA6E - need LAN driver Vista

  I speak a little English.
  Where is LAN driver VISTA for Satellite P100 - 324 PSPA6E?
  If we adjust driver Windows XP?

  Nowhere do I find Windows VISTA driver but it not discovered map net LAN windows me

  Please help me!
  I thank me for help :))

  Hello

  I think that you have an Intel network card and this Lan Vista driver might be automatically installed using the Vista update.
  So it perhaps you can establish internet connection using the WiFi network, then you can run the Vista updates.

  Good luck buddy

• Satellite P100 - 222 PSPA6E - when the new GPU driver will be available

  Hello!

  Me laptop Satellite P100-222 (PSPA6E), a GeForce 7900GS Videocard. Vista operating system is established. Display version 7.15.11.5666 driver.
  The driver are already obsolete, to some new 3D schedules it has a bad display of structures and so on.

  It would be desirable to learn, when appears in new display driver?

  Hello

  > when will appear in the new display driver?

  Who knows I didn t find any info on the Toshiba page.
  But as far as I know the many laptop models are equipped with the same graphics chip.
  Therefore, you can also try a driver for another model that was equipped with the same GPU chip.

  Welcome them

• Satellite P100 - 221 PSPA6E: how to increase the RAM using SD or USB flash memory

  Hello

  I want to spend my memory (2 GB) more than that using SD memory or USB memory.
  I have this happen? If yes how can I to do?

  My computer is:
  Toshiba Satellite P100-221 PSPA6E

  Concerning
  Nevzat

  Post edited by: kanburnevzat

  Hello

  What do you do?
  Using Vista Ready Boost?

  If Yes, please check this page from Microsoft on the Ready Boost feature:
  http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspx

  If you want to increase your RAM, then only the memory module larger RAM would be useful for you.

• Satellite P100 - 324 (PSPA6E) - Intel T7400 - disabled virtualization

  Hi Toshiba support staff

  I have a toshiba satellite p100-324 (pspa6e) with the processor intel core2duo t7400 and my problem is hardware virtualization (VT aka VMX) does not work due to it's locked off the coast by the bios. Also there is no option in the bios to enable it. It's not making any sense that you have this technology, but you can not use.

  I'm a professional programmer but I can't test my programs in a virtual environment due to this bios chip. I've been waiting since the 3.30 bios version. Now I use phoenix bios v4.70 but it does not!

  I think that the irresponsibility of it's toshiba and toshiba not published a new BIOS to support the features of what they sold, this will be my last toshiba product purchase. It's a waste of money. You should have said clearly what are the features have been disabled if you do not plan to resolve this problem. If the toshiba will continue like this, the number of dissatisfied customer will happen.

  As far as I know that virtualization should be Springs per CPU.
  Seems the Intel T7400 supports the VT:
  http://Ark.Intel.com/product.aspx?ID=27256&processor=T7400&spec-codes=SL9SE, SL9SK, SLGFJ, SLGFV

  If I m not wrong not the VT is enabled and supported by default if the VT option is not available in the BIOS.

  How did you check the State of VT?

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• Satellite P100: No CD Windows Vista but only the recovery CD

  Hi, I recently bought a toshiba satellite P100, but it does not seem to have fitted with a disc of Windows Vista, only the preinstalled Vista.

  The laptop works fine for now, but I'm a little worried that if something is wrong in the future, I will have no way to reinstall the OS.

  The laptop came with a recovery disk, and I don't know if Vista is included on this?

  If it isn't in any way I can make a copy of vista installed on my HARD drive?

  Thank you

  Hello

  Don t worry, you don t need to make a copy of your HARD disk, since you already have a vista on your recovery media.

  If you have problems with your system and you want to re - install, then backup all your data on an external, put the recovery in your CD/DVD drive, boot from it and then just 'recover' or 'reinstall' your system. The recovery process works automatically and you will have an installation "factory-like" after recovering from your machine.

  Hope, I could explain it... ;)

  Greetings

• Re: Satellite P100-160 - failed display driver installation

  Satellite P100-160, PSPAAE, 32-bit vista.

  Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

  The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

  To say that I'm pisseed would be an understatement. Can anyone help? Thank you

  Hey,.

  If Aero is not available I think that it s display driver problem

  In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

  If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

  Check this box!

• Satellite P100-221: FN key combinations do not work properly

  Hello

  I have the satellite p100-221 with pre-installed Win XP MCE. After a week of using my computer, a problem with the function keys blue appeared. FN - f1, fn - f2 and all the other fn keys combinations do not work properly. They seem to work, I can change the brightness, switch the touchpad on and out and so on, but no icon on the Info screen appears. While pressing the combination of function keys, the icons on the screen shows the time. How can I solve this problem? Is it software or hardware related?

  Thanks for any help.

  Hello

  I put t think that this question is related to the material.
  I recommend the update of the Hotkey utility.
  On the page of the Toshiba driver I found two different versions:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Your device is Satellite P100-221, then I guess the extra number must be PSPA6E.
  Do not forget that you are using the correct drivers for this device.

• Satellite P100-> no sound with Vista

  Hello
  You can download a lot of drivers Vista for TOSHIBA Canada support i.e. page
  http://209.167.114.38/support/download/listdrivers/drivers.asp?product=notebook&model=satellite%20P10 0 & partnum = PSPA3C-SD402F

  After installing display driver Vista is stable and fast even in Word of Warcraft.

  There is always a small problem. Canadian HD Audio drivers do not work. Original XP driver allows sound but DVD on WMP11 playback, or play WoW does choke system. Uninstalling the drivers for HD Audio done system and DVD run smoother, but there is no sound. 'Funny', it's that play the same DVD with sound with WMC does no problem.

  Someone knows what to do to properly install HD Audio drivers? To have sound and not smothering system?

  Some of the portable Satellite P100 supports his Intel chip Conexant CX20551-22.
  I recommend to visit the Intel Web site and install the latest chipset and drivers!
  Maybe it helps!

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• Satellite P100-160 - several PCI bus do not work with a shadow video BIOS

  Hello

  I got my Satellite P100-160 for about five years now and have never had any problems like this before.
  A few weeks ago my system did not (or something like that), so I pressed the power down button to turn it off.
  Then, as he was put on, he seemed to freeze on the loading page and so I held the off button again.

  The present results are when I turn it on, I get a screen telling me several bus PCI etc do not work and he says 'video occult BIOS.
  I then have the option to press F1 to resume or F2 to enter setup.

  In addition, one of my USB slots has completely stopped working and my card slot has also stopped working.
  Can someone help me please? I'm on Windows XP, SP2.

  See you soon,.
  Liam

  Hello

  I think that you need to access the BIOS (press F2 when the laptop starts up) and put its default value.
  Then try to start the Vista again and press F8.
  Then you will get a menu of advanced start it you should choose repair computer.
  Vista supports a clean internal repair option, you should try this and must repair the operating system.

  If this will not help and you still want to not be able to start a view, then a system recovery may be the best option for you