Satellite P100-238: stuttering graphics and sound with the game

Similar Questions

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Satellite P100-286 stuttering DVDs and games

  Hi all

  I just bought a P100-286, the VISTA OS and come with DVD and games stutter.
  I updated to the latest graphic driver on the Toshiba site, and made sure all the settings are set on the performance (although it seems to make no difference).
  I put this down to VISTA, but it is very annoying.
  Is anyone else having the same problem / found a solution?
  Any help will be appreciated.

  I found a few threads here in the forum about stuttering game on P100 with Vista.
  The problem was the Vista operating system. After installing XP, everything is fine!

  Maybe this is interesting:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21974&MessageID=81624

• Satellite P100-324: tone failure and stops with BSOD

  Satellite P100-324

  Built in modem HDAUDIO Soft Data Fax Modem with SmartCP
  Modem installed correctly to COM3 querry modem ok. diagnostic test "test Modem controller".

  But he has failed the test tone and stops windows with the blue screen. When windows restarts gives a warning "the system has recovered from a serious error".

  What should I do?

  Hello

  Try to remove all created dial-up and also remove modem from Device Manager. After doing this, restart your laptop. The modem will be recognized and installed properly again. Test the modem by using the option under the modem properties query modem.

  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• Questions and Confusion with the game automatic and unable to implement the ReadyBoost for a storage device

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  OK, I tried to set up the Readyboost on one of my flash drives and to do this, access the AutoPlay window. I followed several instructions and advice from several Web sites, I tried to click with the right button on the flash drive in the computer menu, but the AutoPlay option does not appear. And when I go to the control panel section and where is automatic playback, the flash player is not registered under the devices section. I also tried to go to the command prompt as administrator by typing "net start shellhwdetection '. However, who told me that this service was already active. Can someone please help me configure AutoPlay to my flash drive so I can set up the ReadyBoost

  Hey RayRay43

  You must make sure that the flash player is suitable for readyboost

  read all the information on the setup of readyboost to bleepingcomputer tutorial link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  have a happy holiday season

  Walter, the time zone traveller

• Re: Satellite P775 program - 11 p and upgrade with the second HARD drive

  I know that you have a second HDD models, but ist it is possible to add a second HDD to my program P775 - 11 p?

  Because the place and the Bay is already there, only the cables are missing...

  Help, please...

  If there is no upgrade of the connector SATA HDD is not possible.

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• Graphics and sound early are nervous on HP Pavilion

  Hey, first time posting here and hoping someone can help me with the questions I've had with my laptop. Here is the Basic for my laptop specifications:

  HP Pavilion dv6-3150us

  Windows 7 Enterprise 32-bit Edition *.

  Intel Core i5 CPU 2.53 GHz M 460

  4 GB of RAM installed (2.43 GB usable)

  Intel HD Graphics

  Video memory up to 1696 MB

  TOSHIBA 500 GB hard drive *.

  Dolby Advanced Audio with Altec Lansing speakers

  At rest approximately 800 MB RAM usage

  * changed after the drive started failing, in other words not original hardware/software

  So I got my laptop nearly 3 years ago, things were pretty amazing with my laptop and it is honestly the best (and first and only) laptop that I'm away until now. In any case, after 1 year and 2 months, or so 650 GB hard originally started failing. Coincidentially the year 1 mandate had expired, so obviously the call center of HP did not help me at all. Ultimately I had to get a replacement from the hard drive and get my school technician to do the job of its installation and recovery of my information to recurring. Of course, by doing so the original laptop Windows 7 Home Premium 64 - bit OS drivers and all were lost in the old hard drive, so it has installed its own version of 32-bit in my laptop and did the best he could to download and recover drivers and functions of the laptop. Ultimately all this turned out pretty well with the exception that the wireless is not connect more (in any case it is not the real problem, I am here to ask questions on)

  Lately I had problems related mainly to the audio and sound. Everytime I play a video (either from a DVD, hard disk or streaming online) the video begins to become unstable and slower with the time that the video is almost completely stopped. This change in the video also affects the speed at which the laptop running, making it's slower and sometimes I have to either close the video program I use to avoid phone freeze completely.

  A similar thing happens whenever I'm playing games. The graphics in the game are slowed down gradually, and the sound is also affected by the whole process, makes them nervous and slower. This product even when I put the games in lower graphics levels there are (by the way, the games in question are GTA San Andreas, the Sims 3 and DC Universe Online) the problem got worse with time and appeared older 3 months back or almost. Also, it happens randomly. Moreover, indeed like laptop computers HP the more out there, mine has always had problems with ventilation and dust in the fans so it is usually very hot and I would not be surprised if it was any problem where the roots of.

  So far I have removed the unnecessary startup with the Task Manager process, scanned the laptop together with AVAST and Malwarebytes, removed programs that are unnecessary, / that I don't use, files cleaned and defraged the drive hard, has ran memory diagnostics, updated audio and video players, updated the BIOS and the problem still remains.

  My best guess would be that the sound cards and video begin to fail or, even worse, that the motherboard is the one to blame (or simply conflict pilot/codec), but I have tried so many different things and visited so many different forums that I don't really know what it is. I hope someone can help me with determine what is wrong and the steps to resolve this.

  Thanks in advance.

  Thanks for your advice and sorry for the late reply. I tried your suggestion of analysis system for missing/conflicting drivers with the HP Wizard, but there was no change, that this is reading once I uninstalled and reinstalled video driver (which would have been the main reason for my question)

  In fact, I just got the HP Support help in Twitter, and in the end it turns out that my problem with unstable video is not software related, but it might be in fact that my laptop motherboard reached its peak (due to overheating and eternal ventilation). Thank you nevertheless for the help and advice to get the recovery disc for my computer (should have that before, but now at the end)

  Thank you very much!

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• rise of Nations pc game United gives an error: "could not initialize services make sure that your video card and drivers are compatible with the game.

  Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.

  Hello

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the links and check if it helps.
   
  Known graphics issues in Rise of Nations
   
  Card video known issues
  Known graphics issues in Rise of Nations: Rise of Legends

   

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Files and folders with the same name

  I am trying to unzip some files and folders and it works fine on my computer with Windows XP. However, when you use Windows Vista I can't because there are folders and files with the same name. After an internet search, it seems that the only suggestion is to extract the files in separate folders which then would allow them to keep the same name. The problem is I want what they in the same folder and they need to have the names they have.

  NOTE: I do have two files with the same name in the same folder, I have a folder and a file with the same name. I would have thought that this would be acceptable because they are two things separate, and given that it's great under XP.

  All solutions?

  You are right, if I make a file and a text file with the same name, it works fine. However, when I try to extract the files I need it tells me that there is already a file with the same name as the folder. He goes to tell me to choose a new name but my only options are 'try again', 'jump' or 'Cancel '.

  I think I can understand what the problem is. For some reason when you download the zip file, the computer seems to have added a few files side with any format other than "file." It is those who have the same name as the folders as if they were, and they could not be uncompressed because of this. I have no idea whence they came as they appear from nowhere (compared to my XP). I'm trying now unzip the files separately and exclude the strange s 'file '.

  Thanks for your help though!

• Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.

  Help!  I have an apple mac with windows alongside mac system.  I the have not used for a while and when I logged in the windows system advised me to update to IE 9.  To do this, I had to install Service Pack 2 I did.  He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again.  I don't know what to do to reopen and to reinstall the Service Pack.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.