Satellite P100-324: the Fans are still running

Hi to you all,.

Maybe you can answer me the question.
Is it normal that my laptop fans are still running. I put the 'silent' settings in the bios and forced the laptop to run always on 1000 MHz, if I only use it for writing
in Word or reading emails.

It's really annoying. I don't know what to do.

Thankz for your help in advance

Michael

Hello Michael

It is nothing unusual that cooling fan runs constantly on low speed. On modern laptops, there is a powerful hardware that needs to be cooled correctly. Especially many different processes are active in the background and CPU is standing under pressure. Not much when you use just the laptop for writing, but obviously enough to increase the temperature of the CPU.

Try it please set the CPU and cooling to a minimum level method. Also check the Task Manager and end the process, you don't need. Maybe this will help!

Tags: Toshiba

Similar Questions

  • Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

    Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

    All the indicators you mention leads to the PSU, not the Board of Directors.

  • Virtual sound for Satellite P100-324

    Who knows where can I get a virtual to my laptoop (Satellite P100-324 PSPA6) sound, usually on C:\TOOLSCD\VIRTUAL SOUND\ support?

    I put t know why you ask something like that.
    As far as I know on the Satellite P100-324 the virtual sound is not installed and not supported.

  • Satellite P100-324: How do I get the BIOS to version 2.40

    I have the Toshiba Satellite P100-324 with BIOS version 3.30. I need to downgrade the BIOS to version 2.40 because it help with the problem of stuttering when playing under Windows Vista. But the problem is that the version 2.40 is not available to the Web from Toshiba Europe site (I am from the Russia). I found this version (a companion gave me), but it is for model P105 (American version).

    It is - can I use the American version of BIOS 2.40 for my European P100? Is it compatible?

    Hello

    > The question is - is - that I can use the American version of BIOS 2.40 for my European P100? Is it compatible?

    No, as far as I know the BIOS from a U.S. Internet site is different and cannot be used on European laptops. The risks are too high so that the laptop may be damage.

    I think the downgrade of the BIOS can be made by a certified maker Toshiba.
    So if you want to downgrade the BIOS will attempt to contact a service provider authorized in your country.

    But I put t understand the connection with the BIOS and the running game?
    In my opinion the game performance has nothing to do with the BIOS.

    I think your statement about 3.30 BIOS is a bit adventurous.

  • Satellite P100-324: How can I enable shortcuts on the touchpad

    I have the Satellite P100-324.
    Modell Nr.: PSPA6E-02R01FGR

    I saw in the internet to a Web site that something really interested on a surface of touchpad. Here is the link http://forum.notebookreview.com/showthread.php?p=1362295
    But how to activate this feature? How can I activate my touchpad shortcuts?

    I would be really happy to help =)

    Hello

    I think you mean the function of easy capture.

    Something like that you can try to activate in the mouse settings in the control panel.
    Here, you have to choose the double pointing device.
    Then detailed-> TouchPad tab settings

    But first, we should know if your laptop supports this feature.
    Are you sure the model to support you 100%?

  • Game Falcon 4.0 allied force crashes on the Satellite P100-324

    Hi all

    I have a toshiba Satellite P100 324 with a nvidia geforce 7900GS 512 MB vram.
    I have a problem with falcon 4.0 allied force. Everything is going well except when I update to patch 1.06 and upward.

    The game freezes for a second every 10 seconds. I sent the allied force. I've tried everything.
    Anti-one off, reinstall the drivers, reinstall direct 9.0 c... They tell me to turn off Full screen Anti-Aliasing.
    Are not full-screen Anti-Aliasing in my menu of the graphics card as anti-aliasing.

    Is there a difference between Full screen anti-aliasing and anti-aliasing?
    So, I disabled everything in the view menu. I tried to update the drivers, but there is no update for this toshiba.

    Does anyone know if there are new drivers for this model?

    Thank you all
    P.

    Hello

    F4AF is an old game, I don't think that you have the latest video drivers. Anti-aliasing anti-aliasing full screen is the same, don't worry about this.
    Of my friends installed this game too and had similar problems. Try to reinstall the game, the patch to the latest official version. Then, there are a few informal corrections called superpak, which solves many problems. Recent publication is by superpak4.

    Check this. Hope this helps you.

    HomerJ

  • Latency of the display on the Satellite P100-324

    Pls can someone tell me the latency of the display (Toshiba Satellite P100-324)? (I read somewhere that there 18ms... it's true?)

    Hello

    I found the info response speed (Raise + autumn) East of 25ms.

    Good bye

  • How often has RAM of Satellite P100-324?

    Hello

    I ' am, thinking about to upgrade my Satellite P100-324 (PSPA6E) 4 GB of RAM, but did not know which one to choose.
    Initially, I have installed memory 533 MHz. My question is - 533 MHz limit for this model?
    or I can install memory 667 MHz and it will work on 667 MHz?

    Also if I install 4 gb - I'll see 3 GB, but will it still runs dual channel mode?

    Thanks for you help in advance.

    Hi guys,.

    This thing with 4GB-> / 3GB is not uncommon. The chipset is just to take a portion of system memory and turns to shared kept. Unfortunately, the manufacturer of the chipset does not tools release or someone set up a function to decrease/increase the shared video memory.

    So, in the case of 4 GB of RAM you have then 1 GB shared video memory.

    And what about dual channel: Yes it will still work on two channels.

    Greetings

  • Satellite P100-324: tone failure and stops with BSOD

    Satellite P100-324

    Built in modem HDAUDIO Soft Data Fax Modem with SmartCP
    Modem installed correctly to COM3 querry modem ok. diagnostic test "test Modem controller".

    But he has failed the test tone and stops windows with the blue screen. When windows restarts gives a warning "the system has recovered from a serious error".

    What should I do?

    Hello

    Try to remove all created dial-up and also remove modem from Device Manager. After doing this, restart your laptop. The modem will be recognized and installed properly again. Test the modem by using the option under the modem properties query modem.

    If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

  • No sound on a Satellite P100-324 using don't Win 7 64 bit

    Hi all

    I have a laptop Toshiba Satellite P100 - 324.
    I installed Win 7 64 bit on this computer and I have problem with sound now.

    My sound does not work. I tried to install a driver but without result.
    I tried to download the driver from realtek but it was the same thing.

    Do you know how I can run on this PC?

    Thanks for your advice

    Marek

    Hello

    Satellite P100-324 belongs to the series of PSPA6E.
    The European driver Toshiba page asserts that Realtek audio driver should be compatible.
    But the Realtek audio driver Toshiba on page is released for Win 7 32 bit, not 64-bit.

    I recommend the driver on the Realtek page. There you should find one that suits.

    You can also check the Dev ID and could find the compatible driver for internet.
    Here's a How TO - doc:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  • Satellite P100 - 324 (PSPA6E) - Intel T7400 - disabled virtualization

    Hi Toshiba support staff

    I have a toshiba satellite p100-324 (pspa6e) with the processor intel core2duo t7400 and my problem is hardware virtualization (VT aka VMX) does not work due to it's locked off the coast by the bios. Also there is no option in the bios to enable it. It's not making any sense that you have this technology, but you can not use.

    I'm a professional programmer but I can't test my programs in a virtual environment due to this bios chip. I've been waiting since the 3.30 bios version. Now I use phoenix bios v4.70 but it does not!

    I think that the irresponsibility of it's toshiba and toshiba not published a new BIOS to support the features of what they sold, this will be my last toshiba product purchase. It's a waste of money. You should have said clearly what are the features have been disabled if you do not plan to resolve this problem. If the toshiba will continue like this, the number of dissatisfied customer will happen.

    As far as I know that virtualization should be Springs per CPU.
    Seems the Intel T7400 supports the VT:
    http://Ark.Intel.com/product.aspx?ID=27256&processor=T7400&spec-codes=SL9SE, SL9SK, SLGFJ, SLGFV

    If I m not wrong not the VT is enabled and supported by default if the VT option is not available in the BIOS.

    How did you check the State of VT?

  • Satellite P850-30W - the fan does not work after returning from the mode "Eve"

    I have a Toshiba Satellite P850 30W with bios 1.90.

    Sometimes the fan does not work at all after back mode standby on windows 7.
    What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

    Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

    I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
    .. .This error could damage the laptop potentinally...
    to get the fan turns once again I have to restart windows

    anyone experienced this?
    I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

    > Sometimes the fan does not work at all after back mode standby on windows 7.
    > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

    You said it's happened twice and only sometimes done this means that above all the fans are working well?
    In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

    I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

  • Satellite P100-324 - graphic question

    Satellite P100-324
    All native driver, from a site of the manufacturer.
    Intel (R) Core (TM) T7400 @2 2CPU. 216 GHz - driver 5.1.2600.0
    GeForce Go 7900 GS - 8.4.0.0 driver
    BIOS it is updated to the latest version - v4.70
    Windoows - license

    The computer, early toys (including,
    Earlier, who played without problem) leaves it to restart.
    On reboot, instead of it is under abnormal conditions, disconnected,.

    As to the inclusion suggests not to choose a mode of loading, in the magazine of the events of records is not present, in the folder Minidump are absent.
    Work in graphical editors (paint, SketchUP) causes no problems.

    Video as movies will transport, may restart several times and can show a film completely.
    A video by Everest and SiSoftware Sandra card test do does not have programs, both restarts.
    PowerStrip, everything is Ok!
    Temperature limits of standard throughout the long work of the computer:
    ACPI thermal Zone - 58 ° C
    CPU - 1.06 pressure V

    The processor
    Intel Core 2 Duo Mobile (1 Core)-55 ° C
    Intel Core 2 Duo Mobile (Core 2) - 57 ° C

    NVIDIA. GeForce Go 7900 GS
    The temperature of the GPU - 56 ° C
    Ambient GPU - 52 ° C

    Hard drive FUJITSU MHV2200 38 ° C

    For 2-3 days, the situation has changed a bit.
    The viewing of movies (in 30-40 minutes), it is disconnected from the screen, starts to interrupt a sound.
    And then restart the computer follows.

    What or actions has not undertaken, that I do not understand, what exactly are the astable causes of computer work.

    You use Windows XP or Windows Vista?

    You have installed the display on the Toshiba site driver?

    Do you see a graphical corruption on the screen?

    Do you see a BSOD (blue screen error)? Check the event viewer in Control Panel-> administrative tools

  • Satellite P100 - 324 PSPA6E - need LAN driver Vista

    I speak a little English.
    Where is LAN driver VISTA for Satellite P100 - 324 PSPA6E?
    If we adjust driver Windows XP?

    Nowhere do I find Windows VISTA driver but it not discovered map net LAN windows me

    Please help me!
    I thank me for help :))

    Hello

    I think that you have an Intel network card and this Lan Vista driver might be automatically installed using the Vista update.
    So it perhaps you can establish internet connection using the WiFi network, then you can run the Vista updates.

    Good luck buddy

  • SatelliteA200 - 23 k - strange noise coming from the fan area

    I have my model A200-23 laptop Toshiba PSAE6E for 1.5 years and I recently returned from service.
    I sent there due to a nonfunctional key.

    All right, they changed the keyboard... but since I found, I have noticed some strange noises coming from the fan area...

    The sound is not so strong, but it's pretty boring.
    I cleaned using compressed air, but the sound has not disappeared.
    It is still under warranty, but I don't think they would do something against this noise.

    The laptop works very well, it is not overheating or something, but I cannot get used to the noise.
    Should Whatd I do?

    Hello

    Hard to say what noise would that be
    But if the laptop was removed by a technician of the ASP in the past, then you should get in touch with the same technicians again and have to explain your situation!
    A screw has perhaps forgotten who knows
    I think that the technician should take a new look on this laptop

    I wouldn't recommend open and disassemble the laptop yourself because you could void the warranty

Maybe you are looking for