Satellite P100-354: how many rpm has the 160 GB hard drive

Similar Questions

• HOW MANY PEOPLE HAS THE CERTIFICATION MCSE IN THE WORLD

  I WANT TO KNOW HOW MANY PEOPLE HAS THE MCSE CERTIFICATION IN THE WORLD

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  Here are some sources for help.

  Support MCBS
  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

  Forums and blogs MCBS
  http://www.Microsoft.com/learning/en/us/community/community-default.aspx

  Forums MCBS
  http://www.Microsoft.com/learning/en/us/community/blogs-forums.aspx#public-forums

  I hope this helps.

• Satellite M40X-112: can I use the 160 GB HARD drive

  I have a Satellite M40X-112 lapptop and I want to upgrade my 80 GB to 160 GB internal drive.
  How is know possible? (Toshiba hotline cannot give me an answer only that a 80 GB drive has been tried with these lapptop!). Anyone have experience with that?

  I read several statements here in the forum about HDD upgrade on the M40X and it seems that there is a limitation in the BIOS.
  The BISO will not recognize the 160 GB HARD drive and that is why you will be not possible to install an OS or you will not be able to boot from this device.

  Please use the "advanced search" from this forum to find discussions on upgrading the HARD drive.

• Low beginning on Satellite M40-145 after changing the 160 GB HARD drive

  Hello

  I own a Satellite M40-145 since 2005. After more than two years without any problem, two weeks ago the 80 GB hard drive to the original address has been damaged. So I had to replace it with a new, 160 GB (this replacement was made in a store because it's out of warranty).

  I used successfully on the new HARD drive recovery CD to install Windows XP and all the drivers (just as when it was new).
  I used Partition Magic to create a partition of D for data. Also, I installed Office 2003, Norton 360 and connected to the Internet.
  It worked quickly with only small problems than perhaps with little patience I could fix: as this Bluetooth hardware is not detected and the wireless switch began with the lights off even being in the position we (it worked with new just switching out-lit again). But suddenly, after only one day of use, Windows starts became very slow. It takes about 4-5 minutes until it is possible to use the laptop.

  Now, I tried many possibilities to solve the problem, but always ending on the same problem: I used the recovery CD again and try to use the computer with or without updates (I thought that maybe the problem was due to a bad update), with and without Internet access, etc.
  I also tried in vain the program Microsoft Bootvis to try to speed up the startup, etc.

  I even created an image with Acronis to only with XP and Office running fast, so that I could install it again and try new things.
  I also tried to clean the registry with various programs like CCleaner, TuneUp 2008
  Also the defrag JKDefrag and PageDefrag. But always returning to the same problem after a few days of good conduct.

  I don't know what else I could do. I wonder if maybe the new HD is damaged (although I test and no error or no damage was detected) or if the update BIOS might resolve this problem (I'm not and that's a big risk).

  Please, could someone help me?
  Thank you very much for your attention.
  Pablo

  In my view, that there is nothing wrong with the software or all drivers on you laptop.
  I think the key is the enormous size of the HARD drive.

  The difference between 80 and 160 GB is huge.

  To my knowledge, the BIOS supports a limit on the size of HARD drive and I really wonder why the 160 GB HARD drive has been recognized by the BIOS.

  However, I think you should test a 100 GB, 120 GB HDD if the same question perhaps if poster using a HDD a size smaller.

  Best regards

• Satellite Pro A10 PSA15E: update BIOS to use 160 GB HARD drive

  Hello

  I recently bought a second had Toshiba A10 Pro model reference PSA15E-03U82-EN. I was not able to upgrade the disk hard the 40gig towards a 160gig that I have, but it seems that I need to have the original BIOS boot disk to do this.

  How do I keep it? Can I download it and create my own?

  Thank you very much

  James
  [email protected]

  Hello

  If I understand you just upgrade you the BIOS to be able to use the 160 GB HARD drive in your notebook

  Unfortunately, this is not possible. Of course, you can upgrade the BIOS, but this will not help using the 160HDD.
  The BIOS supports a simple limitation of HARD drive and update will not help.

  The laptop supports load 20 GB, 30 GB, 40 GB or 60 GB HARD drive. Maybe you can use also a 80 GB HARD drive but I think that the 160 GB is simply too.

  I hope I could give you clearly

  Best regards

• Satellite C650D-112 - reinstall Win 7 after the failure of HARD drive

  The 320 HDD on my C650D-112 18 months, failed last week.
  I replaced it with a 128 GB SSD and it now boots into Windows 8 preview in about 10 seconds!

  I have a copy of the disk HARD original including the recovery of HARD drive Partition, but no recovery disk.
  I can't reinstall drive would work I had been a responsible adult and created the disk when the laptop is new because the disk is smaller.

  Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

  > Is it possible to reinstall the original Windows 7 Home Premium operating system of the copy of the HARD drive recovery Partition?

  No, to my knowledge, this is not possible, even if you copy the contents of the recovery of HARD drive on the new partition on the new HARD drive, HARD drive recovery option does not appear in the advanced boot menu.
  So, it seems you need to order a new drive to get here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite P100-324: How do I get the BIOS to version 2.40

  I have the Toshiba Satellite P100-324 with BIOS version 3.30. I need to downgrade the BIOS to version 2.40 because it help with the problem of stuttering when playing under Windows Vista. But the problem is that the version 2.40 is not available to the Web from Toshiba Europe site (I am from the Russia). I found this version (a companion gave me), but it is for model P105 (American version).

  It is - can I use the American version of BIOS 2.40 for my European P100? Is it compatible?

  Hello

  > The question is - is - that I can use the American version of BIOS 2.40 for my European P100? Is it compatible?

  No, as far as I know the BIOS from a U.S. Internet site is different and cannot be used on European laptops. The risks are too high so that the laptop may be damage.

  I think the downgrade of the BIOS can be made by a certified maker Toshiba.
  So if you want to downgrade the BIOS will attempt to contact a service provider authorized in your country.

  But I put t understand the connection with the BIOS and the running game?
  In my opinion the game performance has nothing to do with the BIOS.

  I think your statement about 3.30 BIOS is a bit adventurous.

• Satellite A210-128: I want to change the 320 GB HARD drive 7200 RPM

  Hallo all

  Can someoane help me with this little problem?
  I have a portable satellite A210-128 with a hard drive of 250 G 4200 RPM (* slowest *)... I want to change the hard drive with a hdd 2.5 "Western Digital 320 G 7200 RPM (* speed *).

  Question:
  1. If I buy a disk sata2 hard can I put on my laptop because my A210-128 has a disk sata hard?

  2 can I I install vista on this new hard drive on my vista dvd, im asking this because I want to be shor that my recovery dvd * RECOGNIZES THE NEW HARD drive * and I can install a new copy of windows or installing dvd can * only works with disk drives hard toshiba *... ???

  Thank you.

  As to the question;

  (1) I think a SATA2 HARD drive would go because the standard SATA2 is compatible to the bottom. But I assume that the system will operate as a good HDD SATA.

  (2) Yes, you can install vista using the Toshiba Recovery DVD. It shouldn't be a problem with a fresh install

  Good bye

• Satellite X 200-15 k - how can I activate the advanced buffer HARD drive under vista?

  How can I turn on buffer advanced performance HARD drive under vista? This option is not available for this drive?

  * Check this box: *.

  1. right click on the computer in the Start Menu, then select Options.
  2. click on advanced on the left system settings.
  3 select the Hardware tab in the System Properties window.
  4. click on the Device Manager button.
  5 expand disk drives.
  6 right-click on a hard drive under disk drives, and then select Properties.
  7. Select the policies tab in the Properties window for the device.
  8. check Enable advanced performance.
  9. click OK to save the changes and reboot your computer.

  If this is not possible then the buffer of advanced performance is not possible with this HARD drive.

  Hey Buddy

• Satellite A55-S106 does not recognize the 160 GB HARD drive

  I replaced the 60 GB IDE HDD in my laptop Toshiba Satellite A55-S106 with a 160 GB one of Western Digital.

  I've restored a Ghost 10 image to the new drive on a hard disk external. The computer still recognizes only 60 GB. Belarc and HD Tune to see a 160 GB drive, but show the volumes as being only 60 GB.

  Disk management Windows show 93,16 GB as unallocated.
  I am running Windows XP SP3.

  Someone at - it ideas? The BIOS can be crippled somehow? I can't find anything in the BIOS that seems to address hard drive size.

  I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow? Here I used the original recovery CD to recover everything first and then restored the Ghost image?

  I put a 160 GB drive in an old 1999 Dell desktop running Windows 98 and no problems like that. It is hard to believe that a laptop from 2005 would have this problem. It is, however, my first attempt at using a version of Ghost Windows hard drive recovery.

  > I started directly on the Ghost recovery CD after installing the new drive. Should I have formatted, it firstly somehow?

  Yes, I suppose the HARD drive was not formatted in NTFS file format.
  This is why I would recommend booting from original Toshiba Recovery CD and then check if the HARD drive has been recognized correctly!

  Please check first!

• Satellite A500 - is there a model with the 2nd internal HARD drive?

  Is there a model A500 with 2 internal drives?

  Hello!

  You can check it on the Toshiba site in the specifications of the laptop if it s equipped ;) 2nd HARD drive

  But I checked the Toshiba Web site for you, and it seems that Satellite A500 isn't equipped with the 2nd HARD drive.
  If you want a 2nd HARD drive therefore use an external that you can connect via for example fast eSATA port.

  Good bye

• Portege M400: Windows XP does not recognize the 160 GB HARD drive

  Hello

  I have a Toshiba Portege M400 with Windows XP Tablet Edition. Now, I bought a new 160 GB drive. This disk can be recognized within the location Phase Installation of XP. Do I need a new driver?

  Best regards

  Karl Weber

  Hello

  You have to install and include the Portege M400 RAID drivers.
  It's a bit confusing because little protégé M400 does not support 2 HARD drive, but the RAID driver is required.

  Please check the Toshiba European page and download the RAID driver. During the installation of XP her you have to press the F6 key to include the driver from an external USB FDD drive.

  After you have included the don t RAID driver format HARD drive because this will lead to the driver losing.

  Best regards

• 9300 can not detect the 160 GB HARD drive

  I have an Inspiron 9300 with a HARD 80 GB Hitachi drive I tried to replace it with a Seagate 5400.3 160 GB of disk HARD but when I boot, the HARD drive cannot be detected even. In the BIOS it says "primary hard disk {none}".

  I tried to use the 160 GB as an external HARD drive and it works fine. Any help is appreciated! Thks.

  
  

• Satellite P100-257: How can I disable the pagefile

  Hello!

  I have machine P100-257. I added 1 GB of RAM and now it has 1.5 GB of RAM.
  Perhaps that the system will feel better do not slow page file use?

  The question is: my machine really must a page of a cylinder of such size file?
  If not - how to actually disable page file with the help of (just disable file sharing or need some registry tricks too)?

  Thanks in advance and would be greatfull for explanations 8)))

  Hello

  I assume you are using Win XP?
  Well, XP gives you the option of not using the swap file, if you have more than 512 MB of RAM. To disable the page file, perform the following steps:

  -Start the control panel.
  -Select the Advanced tab.
  -Under the performance section, click settings.
  -Select the Advanced tab.
  -In the virtual memory section, click on change.
  -Select No paging file, and then click on set.
  -Click OK.

  That s all ;)

• Satellite 2450 - PXE error after upgrade of the 40 GB HARD drive

  I have a Satellite 2450 and have just replaced my 30 GB drive with a 40 GB drive and trying to use the recovery disk, I get the error PXE.

  I understand that I need to change the boot order of LAN, but when I have the power by pressing F12 it lets me select the CD/DVD drive, and then gives me the same error.

  Any help is received with gratitude.

  Hello

  It seems that the CD/DVD drive cannot read the disc, and therefore the BIOS passes to LAN and try to boot from LAN.
  In this case you will receive the error check cable PXE.

  Did you check if you can use another bootable disk?
  I mean you can try to install Windows using the Win XP disk
  Maybe booting from another disc would work