Satellite P100 - 387 CPU fan works like crazy

Hi all
I have a laptop Toshiba Satellite P100-387. I bought it with 2 friends. The same model.

The problem exists only in 2 of the 3 laptops. It looks like this. When I start the machine everything is ok. While windows starts cpu cooler (or video card cooler if it exists) starts to work. If the fan starts to work the low speed at the highest. And did it for 5 - 10 times. Then a few minutes break and again. It's really noisy. It seems that when you insert a CD or a DVD.

It goes like this also when windows is started. No high consumption of CPU, the fan works like crazy. Start at full speed for 2-3 seconds, then for 1 second and still the same.

Everyone has the same 'characteristic '?
What is this Toshiba Power Saver software works with p100-387?

Hello

I P100-109 close to me and I noticed the same thing. There is no difference between preinstalled WXP or Vista and because of this, I assume that this is a normal behavior. I know it's sometimes troubling, but unfortunately you have to live with it.

Tags: Toshiba

Similar Questions

  • Fan works like crazy and the battery drains quickly after the installation of Sierra on MacBook Pro

    I installed Sierra and since my MacBook fan runs like crazy and the battery drains very quickly. Right now I use Safari and Mail. He has never done this before. How can I stop this from happening? It is now more than 48 hours since I installed Sierra. All constructive suggestions are welcome.

    Try resetting the SMC http://support.apple.com/kb/ht3964

  • The fan works like a crazy and super fast drain battery after installation of Sierra

    I installed Sierra on my MacBook Pro, the fan works like crazy and the battery is empty after about 1.5 hours. Which never happened before. I'm only using Safari and Mail in the moment. I talked to Apple Support and they suggested to reset the SMC, but this brought no improvements. What can I do else? Again, I plan to install the El captain...

    I had this problem just after I installed Sierra on my MacBook Air.  First I tried to reset the SMC and the LANDAU.  This does not prevent fans constantly in the course of execution.  I then used the activity monitor to see what was possibly strain my system.  I noticed the "DCs" process was always sucking up to more than 90% of my CPU usage.  However, others said that it is normal after an upgrade of the OS and it should fall back down once the computer finishes its initial picture and analysis of the files.  So I run my MBA plugged nonstop for 36 hours in a row and the fans just kept running so that the process of "DCs" continued to drain at > 90% of CPU usage.  I also looked carefully at the activity monitor and saw that tasks such as analysis of photos had their own separate process "DCs".  So I dug further into what the devil "DCs" was really do with a lot of CPU resources.  Long story short, I found that there is some glitch in Sierra which causes the macOS stuck on a process involving the keychain and iCloud.

    That's what I did to fix this keychain/iCloud which led to "DCs" fans of triggering and overloading the CPU to be always on:

    -In the activity monitor, I used Force Quit to kill the process that involved the keychain

    -In the activity monitor, I then Force Quit the process that involved icloud

    -In activity monitor, I finally Force closed the process "DCs". (I found that I could not simply force quit 'DCs' without first allowing the keychain & iCloud first)

    -After all, I restarted the computer and fans were finally off the coast!  I open the activity monitor and saw that 'DCs' has is no longer hogging up the CPU usage.  Photoanalysis process were still running in the background at 40-50% CPU use with no trigger unwanted system fans.  the iCloud synchronization and my keychain also worked very well.

    I'm finally able to use Sierra without my fans blazing out of control.  It took me a while to get this sorted out.  Hope this helps to save you a few headaches and time until Apple can get counts that there is this Sierra software glitch they need to address.

  • Problem: The computer is too slow, that I just replaced battery & fan always working like crazy!

    I just replaced battery & fan always working like crazy


    EtreCheck version: 2.9.12 (265)

    Report generated 2016-07-02 14:25:40

    Download EtreCheck from https://etrecheck.com

    Time 03:08

    Performance: good

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (13-inch, mid 2009)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro5, 5

    1 CPU 2.53 GHz Intel Core 2 Duo: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 14

    Video information:

    NVIDIA GeForce 9400M - VRAM: 256 MB

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disc information:

    SAMSUNG SSD 840 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

    EFI (disk0s1) < not mounted >: 210 MB

    Stuff (disk0s2) / Volumes/stuff: 50,00 (GB 49,84 free)

    computoras (disk0s3) /: 199,07 (Go 135,23 free)

    Recovery HD (disk0s4) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS23N)

    USB information:

    Built-in ISight from Apple Inc..

    Card reader Apple

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Configuration files:

    / etc/hosts - number: 20

    Guardian:

    Mac App Store and identified developers

    Launch system officers:

    [loaded] 8 tasks Apple

    [loading] 164 tasks Apple

    [operation] 66 tasks Apple

    Launch system demons:

    [loaded] 47 tasks Apple

    [loading] 164 tasks Apple

    [operation] 79 tasks Apple

    Launch officers:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-30) [Support]

    User launch officers:

    [loading] com.google.keystone.agent.plist (2016-06-30) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Other applications:

    [ongoing] com.etresoft.EtreCheck.103392

    [ongoing] com.google.Chrome.83552

    [loading] 407 tasks Apple

    [operation] 171 tasks Apple

    Plug-ins Internet:

    Default browser: 601 - SDK 10.11 (2016-05-05)

    AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-06-30) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-05)

    3rd party preference panes:

    None

    Time Machine:

    Time Machine not configured!

    Top of page process CPU:

    0% kernel_task

    0% fontd

    0% systemstatsd

    0% Google Chrome Helper (9)

    0% askpermissiond

    Top of page process of memory:

    1.14 GB Google Chrome Helper (9)

    582 MB mdworker (15)

    525 MB kernel_task

    213 MB Google Chrome

    Finder 147 MB

    Virtual memory information:

    1.40 GB of free RAM

    6.85 GB RAM (1.45 GB being cached) used

    Used Swap 0 B

    Diagnostic information:

    2 July 2016, 14:16:17 test - passed

    July 2, 2016, 02:12:33 /Library/Logs/DiagnosticReports/rpcsvchost_2016-07-02-021233_[redacted].cpu_res ource.diag [details]

    / usr/libexec/rpcsvchost

    July 1, 2016, 20:11:19 /Library/Logs/DiagnosticReports/rpcsvchost_2016-07-01-201119_[redacted].cpu_res ource.diag [details]

    June 30, 2016, 22:06:05 ~/Library/Logs/DiagnosticReports/Adobe Photoshop CC_2016-06-30-220605_ [redacted] .crash

    com.adobe.Photoshop - Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC

    June 30, 2016, 22:05:04 / Library/Logs/DiagnosticReports/Adobe Photoshop CC_2016-06-30-220504_ [redacted] .hang

    Reset the SMC could solve the problem.

    Reset the management system (SCM) controller on your Mac - Apple Support

  • Satellite P100-387: how reintall Windows XP Media Center Edition

    Hello

    I work with P100-387. Today, I realized, that there is a problem with the new upgrades for windows and update for Office 2007. I'm not able to open Word. Excel is workin, Power Point also. Opening remarks, the remains of screen splash long (about 3-4 minutes), the menu is being loaded, but when I try to click on something... does not.
    I tried to delete some KB, but nothing helped. I have downloade also all the updates for Office 2007 - still does not.

    If the last option is to reinstall Windows. Please tell me how to do?

    I tried using the recovery disk, but I scare: there is that my HARD drive will be formatted in a single partition of message (for the time being, I have 4, and I want to do all the time with all the data). My goal is to format only C: (the system) and install the fresh news or Windows XP MCE.

    Please give a solution, how to solve this problem.

    Best regards
    Szymon
    [email protected]

    > I tried using the recovery disk, but I scare: there is that my HARD drive will be formatted in a single partition of message

    Well generally it of true the recovery CD would be to format the whole HARD drive and erase all partitions and set the laptop to factory settings.

    But the question is; what recovery CD Toshiba do you have? I presume that it is the new version of the recovery CD because the laptop Satellite P100-387 is not very old.

    You can choose between the Standard recovery mode and Expert mode?
    Using the expert mode you should be able to choose the partition where the operating system would be installed.

    But if it is not able to choose between these two recovery modes, then I guess you have the new recovery called RECO CD and there is no other choice than to format the whole HARD drive. In this case, the backup of the data would be desirable

    Of course, you can use the original CD of Microsoft. Using this CD, you will be able to install the OS on the single partition without format the whole HARD disk.

    Best regards

  • Can satellite P100-387 - I use a solid state drive?

    Is it possible to change the disk hard original toshiba satellite P100-387 with new SSD. i.e.: Kingston SSDNow V-Series 128 GB?

    Hello

    Hmm generally, it shouldn't be a problem since the P100 supports a SATA HDD controller.
    To be honest I n t have an SSD and I can't say that an SSD can work properly, but theoretically it should not be a problem because the BIOS shouldn't differences between a common SATA HDD or SSD SATA.

    Welcome them

  • I can't install the drivers on the Satellite P100-387

    When you install the drivers on a laptop computer error message Satellite P100-387.
    The operating system has been installed from the disk.
    The figure shows a screenshot. (http://s2.ipicture.ru/uploads/081003/BtGJuFhOOE.jpg)

    How to install drivers for video cards?

    You can then write in Russian?

    I don t understand Russian and in this forum you can post ONLY in English! So please respect it!

    On your screenshot, I see that you tried to install a driver from nVidia.
    You have to use and install the graphics drivers from the Toshiba page!
    The other pilots graphics from NVidia or ATI are not supported and usually these drivers should be used due to the risk of overheating graphics.

  • Fingerprints and the remote control supported on Satellite P100-387

    P100-387 has a fingerprint and the remote? Please, someone answer me.
    Thank you.

    Hello

    To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
    But you're right.
    The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

    I also found this site with P100-387 material specifications:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

  • Satellite P100-145 GPU fan does not work!

    Hello

    Is there a solution to this problem yet? He started only since I upgraded my wood to 3.80. The base gets so hot on the right side and it is even radiant heat through the top panel on which my wrist/hand rests.

    Not to mention it will slowly destroying components inside. I was running a game more early to test the fan and it would not turn on just once! It was so hot! At least 100 deg/c!

    I am wanting to downgrade the bios but cannot find anywhere on the sites of toshibas. Can someone provide me please with details on how to get a bios earlier? 2.40 would be great. Back to factory settings and especially on FAN!

    I have the Satellite P100-145. It was great at first... until I found some problems due to the design.

    Help, please

    Hello

    It may seem a little weird, but you can repeat the update of the bios? After this, reinstall the latest display drivers available from the toshiba driver download page. Maybe it just s driver related, so you should give it a try...

    And Don t forget to give some feedback if it succeeded.

    See you soon

  • Satellite A300-1DB CPU Fan is boring, too strong

    Hi all

    I bought a Toshiba Satellite A300-1DB today in a German (580 euros) and I really like the design of laptops and performance, but there is a big problem I can not bear more (and I used it only for 2 hours).

    The CPU fan on the left side of the laptop is annoyning Yes: even if I keep the laptop idle (CPU activity is very low, just under 10% and 1 GB of ram used), the CPU fan is really really strong spinning for a minute.

    After that there is silence, a great silence... for 2 minutes. And then the whole process starts over and over again. Just cold air comes out.

    It's make me crazy, that the CPU in the idle mode fan is stronger than my other Satellite A210 - 106 Turion X 2-52 L with full activity of the CPU. I wish to have a CPU fan that keeps spinning in a low sound.

    Do you have ideas about how to control the fan?
    Otherwise I try to replace it with another laptop (I hope they allow that, unfortunately, it is not an Internet shop where you can send it back up to 14 days)

    Kind regards
    Dieter

    I managed it successfully using balanced power management and using battery optimized for cooling method option. This setting you will find, under advanced power settings > Toshiba Power Saver utility.

  • Satellite P100-160: cooling fan comes loudly for 1-2 seconds every 30 seconds

    I have Vista and I tried everything.
    I set the thermal control mode in the BIOS to "Silent" (although sometimes I look in the BIOS and it is up to the performance). I have disabled Aero, changed the minimum and maximum processor speed etc..

    The irregular, loud fan noise leads me into the wall! I'd rather work permamnently at volume slightly harder than that! The laptop is great, but if someone said "I'll give you a full refund" I would like a shot - only on this noisy fan irritating each ch. 30 seconds!
    Can anyone help? I suspect not - I suspect Toshiba needs to work on its drivers and maybe a BIOS update. I kind of feel that I am at the edge "bleeding" here with this purchase. I have other problems too that I'll post separately.

    Hi David

    I'm sure that any comment as if it was normal will be good enough for you, but there is really not much to do. You can try to play with the power settings and see if something will be better.

    Two weeks ago, I did some experiments with P100 and I installed my Vista with the necessary drivers and tools only. I was positive surprised how Vista works now. If possible, remove all the stuff that you don't need. The fact is that much preinstalled stuff running in the background and force CPU to work under pressure. I really don't see another solution at the moment.

    In my opinion it has nothing to do with the drivers, but perhaps with BIOS. We'll see if Toshiba will offer soon new updates to the BIOS.

  • Satellite P200 - need CPU fan replacement

    I have a Satellite P200-16V and my problem is on the cpu fan.

    I tried to open it, but after the keyboard, hard drive, Rams, OVOCHECK and 40-50 screws and some cables, I realized I have to get out the motherboard and screen mabe and I close it again after 3-4 hours. The cpu fan has been breaking and I don't know what to do.

    I am from Greece. If I go to the toshiba in Greece, I can find a cpu fan or any system cpu radiator? Can you help me?

    Hey Buddy,

    Looks like the fan needs to be replaced and therefore, you should contact the closest service provider authorized in your country. Guys can order a replacement part and swap it out.

    On the Toshiba site, you can find a list of them:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Sorry, but everything that s what I can say. Here it s only a user forum so I think no one knows the exact number of part or a manual how to take apart the laptop but the ASP can do for you. :)

  • Instructions for AMPERAGE satellite 1905-S303 CPU fan

    Hi guys,.

    First of all thank you for your help in advance.

    My fan is this similar to a buzzing noise, but not very much. Almost as if something interferes here or something is loose.
    It can also feel vibrations final on my wrists resulting from the present.

    The computer itself works well no problems. And fan of stitching to do this work, however since his on and outside the usual tricks.
    I get the feeling, it must be emphasized in working well.

    It was that don't happen at the initial start upward and the problem would go sounds fan away quickly to normal.
    Now this noise/vibrations come all the time every time that the fan starts.

    More fan calls, more noise/vibration.

    In any case I tried to blow out with compressed air to clean it. But nothing has changed.
    That's why I want to open it up, take it out, maybe clean it or see if something is loose. Or maybe replace it.

    That's why I'm looking * instructions on how to replace the fan on my Satellite 1905-S303 CPU *.
    Does anyone know all the instructions I can follow? I couldn't find anything on the Toshiba support site.

    (Or instructions for a computer similar to mine at least?) (Or something that might help?)

    Thanks a lot guys! I really appreciate you!

    > My fan is this similar to a buzzing noise, but not very much. Almost as if something interferes here or something is loose. It can also feel vibrations final on my wrists resulting from the present. The computer itself works well no problems. And fan of stitching to do this work, however since his on and outside the usual tricks.

    In this case, I would not recommend to disassemble the laptop just to check if the fan is ok or not
    I mean disassembly of the laptop is really a delicate procedure and there is a risk of damage to the part.

    However, the disassembly instructions are not downloadable on the Toshiba page. I didn t find anything and I think that these manuals are released for service only partners.
    But I think you might find a few details and info on the internet. Use google and search for irisvista.com/tech/

    Good luck

  • Satellite M30: cold - no fan work

    Hello, I used my recovery Cd, and since then my satellite is not cool. I don't hear the fan operation. What should I do?

    Hello

    The fans do not work or you do not hear only fans work?
    If the cooling module works not the CPU can damage.
    In this case, you should not work on the laptop if the CPU can't be cool and you should contact Toshiba service partner in your country for the control of the laptop.

  • Cannot install program on a hidden on the Satellite P100-387 partition

    Hello

    I have a P100-387. Using Partition Magic 8.0 I divided the disk into 5 partitions.
    Now, I have problem with the software instalation like MS Office, Java Runtime approx...
    Error message: "Error 1327. Wronng drive H:\ ».
    The "H" partition is hidden with some system information.

    Plese help solve this problem.

    Concerning
    Szymon
    [email protected]

    What do you do?
    You want to install applications on the hidden partition or what?
    Why did you hide the partition?

    I use also the 8 and I must say that it s a fantastic program.
    I divided my HARD drive into 3 partitions C, D, E
    On C, I have installed Windows operating system and all applications like MS Office for example.

    On the partition D and E, I placed all the documents, files, images, etc.
    As you can see, the programs are installed on the same partition as the operating system Win and I didn't hide all partitions.

    It works very well

Maybe you are looking for

  • What does this image of notification?

    I hope someone can help me. I had this weird symbol appear on the top right of the screen. I clicked, but it did not open. Then he disappeared. I tried Google, but nothing comes. It is perhaps new to El Capitan. (The middle one that looks like clock

  • Lost all data volume on disks

    Hi all Not sure if it is apparent, but after upgrading to 6.5.0 Beta and rebooting I have now no data according to the sytem. Here are the logs. Tuesday, March 15, 2016 09:35:56System: update the definition files Antivirus scanner failed due to failu

  • Laptop computer and printer does not

    My Dell Inspiron 1750 is not communicting with my Dell V313w printer.  Jobs are stuck in the pile, troubleshooting cannot identify the problem, and I have tried everything I am well informed of (not much!)  The printer itself works fine.  Help, pleas

  • Shortcut on the desktop opens the wrong file

    Hey guys, unusual problem. I have two files, then we'll call it A and B. The folder is located on a shared network drive and I have a shortcut on the desktop to him. File B is that an outdated copy of the file a. file B is on my office only, not on t

  • Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

    Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '.  A Windows XP Pro with SP3 iso file