Satellite P100-429 cracked lid
I bought the Toshiba P100.
It is under a month and had a crush on the lid.
Who should I contact to help me get a replacement cover please?
Contact the Service partner in your country. They will replace it and it will be certainly covered by the warranty. If you need the address and phone numbers check http://eu.computers.toshiba-europe.com/ > download & support > find an ASP.
Bye and good luck!
I had to reinstall windows XP on my gf Satellite P100-429, but she lost the original disc, then when I installed the new XP there are the following devices lack drivers (they have the yellow question mark next to them) and I can not connect to the laptop to the internet.
1. audio device on Bus High Definition Audio
2. Ethernet controller
3. mass storage controller
4 controller Netwrok
5. SM Bus controller
6 video controller (VGA Compatible)
Can anyone tell me where I can find these drivers, I searched all day for them.
I guess if I can find it is just a case of putting them on a disk or USB and install them?
Thank you 1 million.
All the drivers, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads > Support home page. In the lower part are download drivers section.
Archive option choose product type. Make sure you choose well model using just the part number PAxxx.
I have a P100-429... and managed to get the GPU fan to work. As most of you probably know, we edit the DSDT in order to get its work under Linux (and these laptops). There, another fix that also allows the GPU fan work. Mine seems to be on low-speed all the time and the Nvidia display configuration application now the temp to be less than 50 c most of the time, so before he went up to 75 or more.
In any case, I've posted my DSDT updated at: http://acpi.sourceforge.net/dsdt/edit.php?manufacturer=Toshiba&name=Satellite+P100-429
NB I use also of the Bios version 3.30.
I found the solution on the French site, I had to interpret slightly.
My laptop feels much cooler now then before.
Hope this helps someone.
See you soon
PS I don't often check here so if you need help with something try sending me an e-mail to rax_mATyahooDOTcoDOTuk
> Hope this helps someone.
I hope too ;) Happy information. Thank you!
I have a Satellite P100-429 with a 3965abg to intel, I have a few router purchased months ago Netgear wnr834b n project, then think, it is high time, I upgraded my internal adapter.
I wanted to know if the Intel Wireless WiFi Link 4965AGN adapter would fit that is a right with the 3965 swap, as it says it's connection is Mini PCIe card * and I have no idea if it would fit?
Yes, she should go, because the W-LAN-mini-card slot is a PCI-Express, so you'll just have to swap the cards. But be careful with the antenna connections, if you bend them too so they break very quickly and then there is NO WAY back and you will pay for the exchange of
the whole cover, where are the antennas of screen.
Best is to contact a local service partner if they exchanged, you don t therefore the risk for the guarantee void if you do something 'not very good' on your machine. :)
Got a Satellite P100 429 he will write DVDs? He says, but I can't seem to do it (without recorder) is all I get.
If it can HOW? (driving me crazy)
I imagine that you replace didn t drive of the laptop.
Many laptops come with a different hardware configuration. This means that as different readers might be installed in the laptop. But if you bought the laptop with the DVD burner I see not why the reader should not burn the DVD.
What burning software do you use? I use Nero. It's great and easy to use.
I advise to use it for burning media. It supports CDs and DVDs
IM wanting to buy a new laptop computer and is came through the "Toshiba Satellite P100-429'." It's the portable perfect! However, when I searched the internet for a detailed technical specification, I found that on pixmania.co.uk he states that there is no memory card reader:
Still other sites, he says that there is a 5-in-1 including Toshiba card reader themselves. It is therefore possible to have the same laptop model but with a different specification? or is it a typo in the site of pixmania? Thank you
> is it possible to have the same laptop model but with a different technique
Of course, many laptops in the same series were delivered with different hardware specifications it is nothing unusual.
For example, the dvi video port, express card slot or the married media card slot are available on some models.
I would trust the Web from Toshiba site and this model should support housing ExpressCard and a PCMCIA Type II slot.
The slot SD, Compact Flash Card slot card and smart card reader are not available on this model
How do install the BIOS after download as I canoe find the beginning of the installation in the downloaded files?
Any help is appreciated as I am new on this.
I have a Satellite P100-429 PSPA3E
You must start the WinPhlash.exe file to start the update of the BIOS.
In addition, here are some practical info on the update to the BIOS:
I have a satellite P100-429 with a Conexant internal sound card.
My problem is when I attach to any other electric audio device to record or play to, a high-pitched noise can be heard on the two pieces of equipment.
When the power of the laptop is removed and it works on battery power, only the noise disappears as soon as the power is reconnected the noise returns
I checked the section driver Toshiba and there is an available (V184.108.40.206) driver update that resolves this problem.
Note: Before installing the audio driver updated to at least the BIOS version 2.10 or higher must be installed on the laptop.
How to install the Sound Driver (V3.0.51):
1. download the driver from the website.
2 unzip the file.
3. double-click on the "setup.exe."
Shortly after, the following window appears:
4. click on 'OK '.
5. click on 'OK '.
The audio driver is installed
Be careful with the update of the BIOS. Choose the good BIOS and the right update procedure
I have a Satellite P100-429. There are three weak, I install Windows Vista Ultimate Edition, but now the highest of screen refresh rate is 60 Hz. I tried to download the latest drivers for the graphics card, but this will not work and the computer also says that the monitor is called generic PNP.
Before Vista has a 100 Hz screen refresh rate and monitor had his screen Toshiba TruBrite WXGA + TFT of own name I tried looking for drivers for the monitor but without success, someone can help me pretty please, I get headaches for the low screen refresh rate.
Have you installed the right graphics card driver?
Immediately after installation of Vista, the operating system uses Microsoft's own common graphics driver.
If you want to use additional graphics options, you need to install the compatible graphics card driver.
But I want to clarify something. The LCD or TFT screens give excellent quality and resolution at 60 Hz.
the Refresh on TFT rate simply won't say the same thing about monitors CRT.
Response time, brightness of the Image and the contrast of the Image are more important for a TFT or LCD monitor like the refresh rate.
Performance display and the quality isn't worst if it run on 60 Hz
Therefore, I see no reason to change the refresh rate of 100 Hz
I had a bad flash on my Satellite P100-429.
The utility crashed which left me with a bookend. Not happy
I ve created a floppy crisis recovery disk & bought a USB floppy drive after a lot of internet hunting for info.
Problem is that I need to check on the exact key combination for my laptop to the crisis recovery mode reverie.
Power on I have the usual symptoms, LED flash, power for CD-rom, click on power of floppy etc...
I just need to check the correct sequence for the combinations of keys.
Can anyone help?
Win - f, victory-b, f - fn, fn - b, victory-esc, fn-escape doesn t seem to work for me
The waiting time for floppy drive boot after combination etc?
I n t have experience with these tools of recovery of the BIOS because I think it s a little too risky. There is no official way to recover a BIOS and I don t want to destroy the whole ROM module.
In my opinion if a BIOS update n t successful, you should go to an authorized service provider. Contact a technician for laptop and explain your situation. The technician can try to reflash it and they have more experience. I think that this should t be a problem to connect with one. ;)
I have 2 GB of Ram at the moment and would like to 4 GB is possible, accept the Bios and I run Windows Vitsa Home Edition.
I googled a bit and found some information s
It seems that the Satellite P100-429 supports the 4 GB of RAM.
The Intel® 945 PM Express chipset, which is installed in this notebook supports 4 GB to 400, 533 and 667 MHz
So, theoretically, you might be able to pass to 4 GB of RAM.
But note; If you are using Vista 32-bit, then the OS will see only 3.2 GB
To get full access 4 GB of RAM, you will need the 64-bit Windows OS.
I had a satellite P100-429 during about three weeks, the wireless card was working fine until yesterday. Today I turned on the laptop, but I can't connect to my access point.
In fact the laptop can now find any wireless network at all.
Can anyone help?
Have you checked the common things like a status of Wlan card in the device, the Wlan router configuration manager, etc...?
Also check if the Wlan card switch is set to on. Further, you can try to fix the WiFi connection.
To do something like that, he must go to "network connections", right click on the WiFi connection and choose repair.
Do you use 3rd party WLan configuration software? If so, please check if the windows have configuration option WLan has not been activated.
Does anyone know how to access the HDD on a Satellite P100-429 as I would like to replace it with a new one with a different capacity.
So I Don t know how replace it, but generally, to look to the bottom of the machine, because sometimes there are blankets and behind which covers, there is somewhere HARD drive.
I forgot to mention that you have to lose the screws that hold the covers. ;)
I just upgraded my home network to the draft of the standard "n" and thought that I would upgrade my wireless card on my laptop P100-429;
Laptop is under Vista Home Premium and has the latest version of BIOS and drivers installed.
Laptop currently has an equipped Intel 3945ABG card that works very well. I bought an Intel 4965AGN card but when I enter it, the powers of computer to top, but wont load (lights, fan-nothing else)
Okay - so I read on some forums, could be a bad card, so I bought a brand Toshiba 4965AGN card - P/N G86C0002P710
Still having the same problem - the computer refuses to start. Intel technical support say the card should work?
Obviously is a compatibility problem - what can I do about it?
Or did someone knows what kind of card I should use?
Thanks for your help!
I m not a Satellite P100 owner but is your laptop equipped with 3 antennas or only 2?
If your laptop has only 2 antennas t, you can pass it to N project because this WiFi standard needs of 3 antennas.
I think that your laptop has only 2 antennas, so that would be the reason why the two cards are not compatible to your laptop.
Can someone tell me where I can buy an outer cover for my laptop P100-429.
I know that it is covered by the warranty and the cracking to the hinge is a defect with this model.
However, it works without problem, and I use it every day.
If anyone can help with a spare parts distributor who can provide coverage.
With regard to the Sid
I think that you will not have many options.
Look on ebay, maybe you can get a case or a faulty laptop.
If you have no success, you should go to a local ASP. They can order these parts and Exchange.
Maybe you are looking for
The ITI is the same on the top. iPhone 4S 9.3.4
Vista insists on 9 important updates on MSOffice 2003 after uninstalling IE8 because of accidents etc. Install updates error code 646. I made this 3 months ago. There was a script sent by MS after 3 hours looking for who did some magic registry but I
So I got my Acer VN7 - 791 G for 5 months now and until last month, everything was going fine until suddenly, the system has become VERY slow (operating system and programs have been suspended) and the boot process has long redicilously. To exclude a
I have 31 000 clips in the timeline panel. Forever, it will take to move individually!
Everyone knows the script editor, v7, crash at startup in standalone mode? I get the message of java that the connection to the server is not available, the status bar moves a bit, and then it stops. If I am connected to the server, I'm fine. Any hel