Satellite P100 - 429 LAN wireless has stopped working

Similar Questions

• Satellite P100-429: Intel Wireless Wifi Link 4965agn card is not compatible?

  Hey guys

  I have a Satellite P100-429 with a 3965abg to intel, I have a few router purchased months ago Netgear wnr834b n project, then think, it is high time, I upgraded my internal adapter.

  I wanted to know if the Intel Wireless WiFi Link 4965AGN adapter would fit that is a right with the 3965 swap, as it says it's connection is Mini PCIe card * and I have no idea if it would fit?

  Hello

  Yes, she should go, because the W-LAN-mini-card slot is a PCI-Express, so you'll just have to swap the cards. But be careful with the antenna connections, if you bend them too so they break very quickly and then there is NO WAY back and you will pay for the exchange of
  the whole cover, where are the antennas of screen.

  Best is to contact a local service partner if they exchanged, you don t therefore the risk for the guarantee void if you do something 'not very good' on your machine. :)

  Welcome them

• Satellite A100 - 02L - Media Player has stopped working

  I have a Satellite A100 - 02L with Vista. I have there two weeks and media player has stopped working, it won't even open. It worked fine when I bought the laptop but not worked for the past few days.
  Does anyone know why it happened or how I might solve this problem?

  Maybe a magician can tell you for sure why WMP has stopped working. Who knows what you have done with it?

  Try to download and install the latest version. Maybe it will be working again.

• Satellite A60-652: ati2dvag driver has stopped working

  Hello

  Recently, I have a few problems with my graphics. My satellite freezes and goes to a low resolution with a few colors. A message indicates that the ati2dvag driver has stopped working. After that restart of the satellite shows a blue screen and restarts... same thing happens. Only stop and try again after a few minutes made me return to the normal Windows.

  I tried to look for new drivers, but I can't indicate my model (SA60-652)... is this too old model for the updates?

  Toshiba SA60-652
  ATI MOBILITY RADION 7000 IGP
  pilot ati2dvag (6.14.10.6430)
  Windows XP (SP2)
  AVG virus scan
  Hitman Pro anti-spyware
  ATI hydravision installed but never used :-/
  Laptop has recently increased temperature... I'll deal with that after my final thesis (May 8)

  Please can you help me?
  If you can, please be made clear in the instructions, "I don't know much about computers caus... (PEBCAC)

  Thank you!

  Hi Jeroen,

  I think that your problem is related to overheating rather than a defective display driver. The idea here is that it takes several attempts to reboot, giving the unit time to cool.
  I suggest that you try to remove all dust and debris from your radiator and see if it improves the stability of your units.

  You can download a copy of your display driver of: -.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

  Kind regards

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• Scroll wheel on the mouse Microsoft 3000 wireless has stopped working?

  I bought a Microsoft Wireless 3000 Mobile in purple mouse, manufacturer #6BA-0026 last month and now the wheel has stopped working. I can't move the mouse. Only the buttons work, this mouse is less, is about a month. Cannot take back to the store because they one day 14 return policy, so now I'm stuck with a mouse that doesn't work. Is it possible to get the scroll wheel to work. Using the button takes a lot more movement and it is easier to use the wheel. Why my mouse was working only for a month? Do I have to spend more money to buy another mouse? Is there some type of downloading software that I can use to make this mouse works correctly.

  Hello

  1. have you made changes on the computer before this problem?
  2. did you try to use the same mouse to different computer and check?

  Step 1: Run the fixit from the following article and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Uninstall and reinstall the software mouse and check.

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite P100-429 - new wireless network card does not work

  Hello

  I just upgraded my home network to the draft of the standard "n" and thought that I would upgrade my wireless card on my laptop P100-429;
  Laptop is under Vista Home Premium and has the latest version of BIOS and drivers installed.

  Laptop currently has an equipped Intel 3945ABG card that works very well. I bought an Intel 4965AGN card but when I enter it, the powers of computer to top, but wont load (lights, fan-nothing else)

  Okay - so I read on some forums, could be a bad card, so I bought a brand Toshiba 4965AGN card - P/N G86C0002P710
  Still having the same problem - the computer refuses to start. Intel technical support say the card should work?
  Obviously is a compatibility problem - what can I do about it?

  Or did someone knows what kind of card I should use?

  Thanks for your help!

  I m not a Satellite P100 owner but is your laptop equipped with 3 antennas or only 2?
  If your laptop has only 2 antennas t, you can pass it to N project because this WiFi standard needs of 3 antennas.

  I think that your laptop has only 2 antennas, so that would be the reason why the two cards are not compatible to your laptop.

  Welcome them

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye

• Satellite A500 - 15N Wireless has stopped working

  I bought my A500-15N in last October and had no problems at all with wireless connectivity. Last night when I was surfing Internet it suddenly stopped working (literally between two pages on Wikipedia) and I can connect is no longer. When I try the troubleshooting option, I still see an error 'wireless capability is turned off. I not made any changes to my router or laptop, so I'm not sure what could be going wrong.

  Is the wireless adapter fuck and I need to get this replaced? I tried the combo FN + F8 but which does nothing either.

  Hey,.

  Is the WLAN card still listed in Device Manager correctly and have you tried another key FN if combination work?
  Usually the WLAN card can be disabled with the FN + F8 key combination you wrote

  In your case I would recommend updating the driver WLAN. You can download the latest driver WLAN here:
  http://APS2.toshiba-tro.de/WLAN/

• M40X: Wireless has stopped working

  Hello world

  Please can someone help. My wireless connection just stopped working. I have a Toshiba M40x, a router belkin g (F5D7231uk4) and my sevice provider is NTL. I checked with NTL and all is well. I took the cable that connects the modem to the router on the router and connected to my PC laptop and the internet works fine.

  I also reconected it cable and run another ethernet cable from the router to my laptop computer and again internet works fine. When I right click on the little icon wireless and research of wireless computer sometimes shows my router, but nothing happens when I click conect. External wireless switch is turned on.

  Please note that I'm not amazingly well with PCs, so answers in English would be fine.

  Hello

  @fraziola: Sorry, but I m bit confused. The ethernet cable is plugged in and you want to connect to the router via WiFi? Or you have disconnected the cable and then try to connect the router?
  However, in my opinion, you need to reconfigure the router. Check all the settings of the router. In addition, you will need to create a SSID.
  I put t know if you use a WLan configuration tool and more, but if not to check the properties of WLan. In the wireless network tab, you will find an option to use windows to configure my wireless, this option must be enabled.
  Then, you can use the lives option wireless networks.
  If you use encryption, then you must also enter a good code.

  Believe me, the WiFi network is a very complex issue and if you have no experience so ask someone who has more experience of these things.

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• Satellite A300 - 1 5: webcam has stopped working - Webcam driver open fail

  Hello

  features of my laptop here: ([A300 - 1 G 5 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1055589]) for any need details...

  The problem is simply, the webcam has stopped for some reason, an error messeage said "driver fail open Webcam. "Please restart camera or computer.

  I noticed that whenever I put the computer in mode "sleep" I was getting on the bar notification says "USB device not recognized..." I was not aware of what it was - he thought because of the mouse USB is connected... but I think that its related to the camera...

  the software is installed, but camera does not work and cannot allow him... I download the latest driver from the toshiba site, but still does not...

  Currently, my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall enabled, the Windows UAC enabled, Ani-Virus of Kaspersky 2009 Enabled. I only use Windows Live Messenger (which I think to date, version: 14.0.8089.726) I used camera with, I quite using recognition of faces a long time ago and rarely use the webcam... I didn't install or update all drivers and used to have the laptop works perfectly...

  So what happened now?

  Hello

  I had a similar error message and might solve this problem by disabling startup webcam software.
  In msconfig-> Start Up tab I have disabled the Chicony webcam software.
  This prevents automatic loading.
  I don t use MSN but Skype and the Chicony webcam software is always off (unsigned) if Skype is running.

  Maybe you should try that too.

  In addition, you can try this:
  Go to Device Manager, mark the webcam (peripheral video imaging peripheral USB) and removed from the list of devices.
  Then restart the laptop and wait until the webcam is recognized again.

  Then test it.