Satellite P100-429: sharp sound appears when 3rd device is connected
I have a satellite P100-429 with a Conexant internal sound card.
My problem is when I attach to any other electric audio device to record or play to, a high-pitched noise can be heard on the two pieces of equipment.
When the power of the laptop is removed and it works on battery power, only the noise disappears as soon as the power is reconnected the noise returns
I checked the section driver Toshiba and there is an available (V3.11.0.51) driver update that resolves this problem.
Note: Before installing the audio driver updated to at least the BIOS version 2.10 or higher must be installed on the laptop.
How to install the Sound Driver (V3.0.51):
1. download the driver from the website.
2 unzip the file.
3. double-click on the "setup.exe."
Shortly after, the following window appears:
4. click on 'OK '.
5. click on 'OK '.
The audio driver is installed
Be careful with the update of the BIOS. Choose the good BIOS and the right update procedure
Tags: Toshiba
Similar Questions
-
Need drivers of Windows XP Home for Satellite P100-429
Hello
I had to reinstall windows XP on my gf Satellite P100-429, but she lost the original disc, then when I installed the new XP there are the following devices lack drivers (they have the yellow question mark next to them) and I can not connect to the laptop to the internet.1. audio device on Bus High Definition Audio
2. Ethernet controller
3. mass storage controller
4 controller Netwrok
5. SM Bus controller
6 video controller (VGA Compatible)Can anyone tell me where I can find these drivers, I searched all day for them.
I guess if I can find it is just a case of putting them on a disk or USB and install them?Thank you 1 million.
All the drivers, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads > Support home page. In the lower part are download drivers section.
Archive option choose product type. Make sure you choose well model using just the part number PAxxx.
Good bye
-
Satellite P100-429 does support the 5-in-1 card reader?
IM wanting to buy a new laptop computer and is came through the "Toshiba Satellite P100-429'." It's the portable perfect! However, when I searched the internet for a detailed technical specification, I found that on pixmania.co.uk he states that there is no memory card reader:
http://www.Pixmania.co.UK/UK/UK/462038/art/Toshiba/Satellite-P100-429.html
Still other sites, he says that there is a 5-in-1 including Toshiba card reader themselves. It is therefore possible to have the same laptop model but with a different specification? or is it a typo in the site of pixmania? Thank you
> is it possible to have the same laptop model but with a different technique
Of course, many laptops in the same series were delivered with different hardware specifications it is nothing unusual.For example, the dvi video port, express card slot or the married media card slot are available on some models.
I would trust the Web from Toshiba site and this model should support housing ExpressCard and a PCMCIA Type II slot.
The slot SD, Compact Flash Card slot card and smart card reader are not available on this model -
Satellite P100 - 429 LAN wireless has stopped working
I had a satellite P100-429 during about three weeks, the wireless card was working fine until yesterday. Today I turned on the laptop, but I can't connect to my access point.
In fact the laptop can now find any wireless network at all.
Can anyone help?
Have you checked the common things like a status of Wlan card in the device, the Wlan router configuration manager, etc...?
Also check if the Wlan card switch is set to on. Further, you can try to fix the WiFi connection.
To do something like that, he must go to "network connections", right click on the WiFi connection and choose repair.Do you use 3rd party WLan configuration software? If so, please check if the windows have configuration option WLan has not been activated.
-
GPU fans to work on Satellite P100-429 (Nvidia) on Linux
Hello
I have a P100-429... and managed to get the GPU fan to work. As most of you probably know, we edit the DSDT in order to get its work under Linux (and these laptops). There, another fix that also allows the GPU fan work. Mine seems to be on low-speed all the time and the Nvidia display configuration application now the temp to be less than 50 c most of the time, so before he went up to 75 or more.
In any case, I've posted my DSDT updated at: http://acpi.sourceforge.net/dsdt/edit.php?manufacturer=Toshiba&name=Satellite+P100-429
NB I use also of the Bios version 3.30.
I found the solution on the French site, I had to interpret slightly.
http://QL.homelinux.NET/wiki/doku.php?id=Ubuntu-7.04:DSDT #le_ventilateur_de_la_gc_nvidia
My laptop feels much cooler now then before.
Hope this helps someone.See you soon
RaxPS I don't often check here so if you need help with something try sending me an e-mail to rax_mATyahooDOTcoDOTuk
> Hope this helps someone.
I hope too ;) Happy information. Thank you!
-
Satellite P100-429: Intel Wireless Wifi Link 4965agn card is not compatible?
Hey guys
I have a Satellite P100-429 with a 3965abg to intel, I have a few router purchased months ago Netgear wnr834b n project, then think, it is high time, I upgraded my internal adapter.
I wanted to know if the Intel Wireless WiFi Link 4965AGN adapter would fit that is a right with the 3965 swap, as it says it's connection is Mini PCIe card * and I have no idea if it would fit?
Hello
Yes, she should go, because the W-LAN-mini-card slot is a PCI-Express, so you'll just have to swap the cards. But be careful with the antenna connections, if you bend them too so they break very quickly and then there is NO WAY back and you will pay for the exchange of
the whole cover, where are the antennas of screen.Best is to contact a local service partner if they exchanged, you don t therefore the risk for the guarantee void if you do something 'not very good' on your machine. :)
Welcome them
-
Satellite P100-429: how to burn on DVD?
Got a Satellite P100 429 he will write DVDs? He says, but I can't seem to do it (without recorder) is all I get.
If it can HOW? (driving me crazy)Hello
I imagine that you replace didn t drive of the laptop.
Many laptops come with a different hardware configuration. This means that as different readers might be installed in the laptop. But if you bought the laptop with the DVD burner I see not why the reader should not burn the DVD.What burning software do you use? I use Nero. It's great and easy to use.
I advise to use it for burning media. It supports CDs and DVDs -
Re: Satellite P100-429 - how to upgrade the BIOS?
How do install the BIOS after download as I canoe find the beginning of the installation in the downloaded files?
Any help is appreciated as I am new on this.
I have a Satellite P100-429 PSPA3EYou must start the WinPhlash.exe file to start the update of the BIOS.
In addition, here are some practical info on the update to the BIOS:
http://www.toshiba-tro.de/biosinfo/ -
Bad screen refresh rate shown under Vista - Satellite P100-429
Hello
I have a Satellite P100-429. There are three weak, I install Windows Vista Ultimate Edition, but now the highest of screen refresh rate is 60 Hz. I tried to download the latest drivers for the graphics card, but this will not work and the computer also says that the monitor is called generic PNP.
Before Vista has a 100 Hz screen refresh rate and monitor had his screen Toshiba TruBrite WXGA + TFT of own name I tried looking for drivers for the monitor but without success, someone can help me pretty please, I get headaches for the low screen refresh rate.
Hello
Have you installed the right graphics card driver?
Immediately after installation of Vista, the operating system uses Microsoft's own common graphics driver.
If you want to use additional graphics options, you need to install the compatible graphics card driver.But I want to clarify something. The LCD or TFT screens give excellent quality and resolution at 60 Hz.
the Refresh on TFT rate simply won't say the same thing about monitors CRT.
Response time, brightness of the Image and the contrast of the Image are more important for a TFT or LCD monitor like the refresh rate.Performance display and the quality isn't worst if it run on 60 Hz
Therefore, I see no reason to change the refresh rate of 100 Hz -
BIOS update fails on Satellite P100-429
I had a bad flash on my Satellite P100-429.
The utility crashed which left me with a bookend. Not happyI ve created a floppy crisis recovery disk & bought a USB floppy drive after a lot of internet hunting for info.
Problem is that I need to check on the exact key combination for my laptop to the crisis recovery mode reverie.
Power on I have the usual symptoms, LED flash, power for CD-rom, click on power of floppy etc...
I just need to check the correct sequence for the combinations of keys.Can anyone help?
Win - f, victory-b, f - fn, fn - b, victory-esc, fn-escape doesn t seem to work for meThe waiting time for floppy drive boot after combination etc?
Help!Hello
I n t have experience with these tools of recovery of the BIOS because I think it s a little too risky. There is no official way to recover a BIOS and I don t want to destroy the whole ROM module.
In my opinion if a BIOS update n t successful, you should go to an authorized service provider. Contact a technician for laptop and explain your situation. The technician can try to reflash it and they have more experience. I think that this should t be a problem to connect with one. ;)
Good luck!
-
Satellite P100 - 429 (PSPA3E) memory upgrade to 4 GB
I have 2 GB of Ram at the moment and would like to 4 GB is possible, accept the Bios and I run Windows Vitsa Home Edition.
Hello
I googled a bit and found some information s
It seems that the Satellite P100-429 supports the 4 GB of RAM.
The Intel® 945 PM Express chipset, which is installed in this notebook supports 4 GB to 400, 533 and 667 MHzSo, theoretically, you might be able to pass to 4 GB of RAM.
But note; If you are using Vista 32-bit, then the OS will see only 3.2 GB
To get full access 4 GB of RAM, you will need the 64-bit Windows OS.
-
On Satellite P100-429 replacement hard drive
Hello
Does anyone know how to access the HDD on a Satellite P100-429 as I would like to replace it with a new one with a different capacity.
Hello
So I Don t know how replace it, but generally, to look to the bottom of the machine, because sometimes there are blankets and behind which covers, there is somewhere HARD drive.
Welcome them
I forgot to mention that you have to lose the screws that hold the covers. ;)
-
Orifginal title: Aggrevation
How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.
Hi ElginCarelock,
You can try to restart the computer and check.
Uninstall all USB device manager entries
a. Click Start and typedevmgmt.msc and press ENTER.
b. expand Bus USB controllers.
Note: You will need to scroll down to find this point.
c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
d. Repeat steps above for each controller USB is listed under Bus USB controllers.
e. restart the computer and check.
Hope this information is useful.
-
Original title: icm32.dll error message of World of Warcraft
Error message appears when I try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error. This pop-up has an "OK" button that you can click, but the message appears again and again. I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged
System Type x 64-based PC
Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011What should I do to solve this problem. And any idea on what may have caused the problem.
Thank you
Hello
1. What is the exact full error you get when you try to play the game?
2 have you made changes on the computer before this problem?
Method 1:
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
I suggest you to check the question in the clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.
Method 3:
I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.If the problem persists, contact the game manufacturer for assistance.
-
You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help
diana73,
First of all, make sure that you're connected Administrators account to do.
How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:
- Sign in as an administrator or as a member of the Administrators group.
- Click Start , click run and type compmgmt.msc .
- In the left pane, and then click disk management .
- Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
- Click change .
- Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
- Click Yes when you are prompted to confirm the drive letter change.
The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.
Good luck! Please rate me upward if you find my post helpful. Thank you!
Maybe you are looking for
-
Somehow, my policy changed in a troubled police.As far as I know, I have not changed anything in the settings for the police.
-
Activate sim card invalid for straight talk
I didn't read the directions and active right AT & T and T-Mobile sim card in my phone and I had to activate the SIM CDMA. Now my service said outspoken is on the t-mobile sim card, but will not be displayed on my phone due to the fact that I have ac
-
JB newspaper requested changes.
Motorola, since it is clear that we do not get an explanation of what happened, I think it is reasonable to ask for a change log. Since it seems to have been a mistake Verizon does not do anything on their site. It makes it difficult for those of us
-
How to remove an obsolete alternative e-mail address, Hotmail
When I click on 'remove' next to the alternative Email address in Hotmail account, a message is sent to the alternate Email address on how to proceed. I can't access this old, obsolete address to go forward.
-
I have a camera powershot SD1000. I noticed that the lines have appeared on the LCD. They look like this _ _ - and some are thicker. It was not just one another problem it bother me. Sometimes they are really noticeable, that it depends on the pictur