Satellite P100-434 - how does the safety lock?

Similar Questions

• Satellite P100-434 - how to activate VT?

  I have a P100-434 (obviously lol) and its ascent with a T5500 CPU.

  According to intel, it supports the VT, so how do I activate it?
  My google-fu breaks me down.

  Maybe you should read this FAQ from Toshiba:

  + The P100 series supports the "Intel Virtualization Technology" (Intel VT)? +

  If the processor supports the "Intel virtualization technology" then it is activated by * default.*
  There is no point in the BIOS to change the setting.

  Good bye

• Satellite P100-434 won't boot to the top

  Hi Ive got a Satellite P100-434 and Ive had for more than a year.

  Unfortunately today I couldn't get started.

  The power led lights up, the HARD drive makes light very briefly.
  The display lights. If she does not even there to boot in the bios.

  Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

  see you soon

  John

  Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

  However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

  Also try with the power cable plugged in power and remove the battery.

  If all else fails, then you have a very expensive paper weight.

  Good luck.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Upgrade CPU on Satellite P100-434

  Satellite P100-434 BIOS v 4.80 does support the Core2Duo T7500 Intel proccessor?

  I'm currently have T5500 and want to update to T7500, is the same thing but I don't know the motherboard/BIOS card can support this CPU?

  I advance thank you

  For CPU upgrade, there are several different important things and not the BIOS only.

  Check it please this Toshiba document initially - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  BTW: I m not sure but I think you can find similar topics related to upgrade CPU on P100. Use the advanced search in this forum. Maybe you'll find some interesting discussions.

• Play Call of Duty 4 on Satellite P100-434

  Hi all

  I recently bought my Toshiba Satellite P100-434 (Intel 1.66 Dual / 2 GB RAM / Go7600) and we just tried on the game system.
  I installed COD4 and tried to play, but it seems that the laptop has trouble running.

  I've updated my display drivers for 32-bit vista nvidia those downloaded from this site seems to have done very little, or even no difference.

  I only run the game with each setting to minimal with resolution of 640 x 480 and it is still fighting.
  Everything on the laptop must be sufficient to operate this game except for the cpu that is recommended a dual 1.8 and it's a double of 1.66. just that would be why the game does not work as well?

  I would not have thought so.
  I have had friends who have run this game on pc spec worse.

  Any suggestions what might be my problem or what else I could do to improve performance?

  Thank you very much...

  Hello

  If have a Satellite phone with an AMD processor performance and the most recent card ATI Radeon graphics.
  I m running Windows XP due to the better performance of game. Vista needs of more material resources, and that's why I prefer the XP.

  Anyway, last week I ve installed the COD4 and believe me this game needs more resources than you think.
  However, you should be able to run the COD4 using resolution 1024 x 768. But it s another question if COD4 will run smoothly.

  However, I found a Toshiba FAQ doc about a few videos "stutter" during the game using Windows Vista:
  Check this box:

  [New video driver and BIOS eliminates video "stutter" during the game (Windows Vista): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1924 764xml & sliceId = & dialogid = 46208288 & stateId = 0% 200% 20 46206416]

  With regard to this doc the driver display & BIOS update should improve performance.

  Good bye

• Stream video slowdown and going out of sync on Satellite P100 - 434 Vista

  I have a Satellite P100-434 pre-loaded with Windows Vista and WinDVD. During playback of DVD video, the video stream slows and goes badly synchronized with audio after a short period of normal play.

  The video then jumps and will be back in sync for a short time before going off again. I found references to this on a general search of the web with the only offer the solution of reloading with XP.

  I confirmed that with Windows XP Home edition, the problem does not occur, and with Vista it always happens with PowerDVD v7 good than not as pronounced. I would like suggestions as to the cause and possible solutions.

  Well, what to say seems the Vista itself or the drivers are responsible for this problem!
  As you already suggested the use of the Win XP operating system would be simpler!

  Anyway, the laptop uses the nVIDIA GeForce Go7600 FX card. Then first try to update the graphics driver and check a few improvements!
  Try to use the drivers from the site omegadrivers.net

  In addition I recommend you disable the acoustic silencer maybe it would help

• Satellite P100 - 434 BSOD boot problem

  Hello everyone!

  I have laptop Toshiba Satellite P100-434 and lately I encountered many problems during startup.

  1. the laptop starts normally until the entry of the password. Then, in the middle of typing BSOD.
  2. the laptop gets BSOD or turns off 2 seconds after the Microsoft bar appeared.
  3. the laptop won't turn on - after launch is only a flash of three blue LEDs on the right and the screen remains blank. No home Toshiba screen.

  After a few attempts I managed to get the Toshiba welcome screen (this is after the second flash), but there are other issues later, the laptop shuts down or trying to launch startup repair. He speaks only of unspecified error and restores the previous state.
  4. I tried to enter safe mode, but several times I met the same: the laptop turns off after loading some drivers.

  BSOD are too short for me to identify what is ongoing - I noticed something just BAD POOL and IRQL NOT EQUAL to something as if it was something with the drivers, no doubt the NVIDIA driver display. I uninstalled and downloaded a new and installed (version 7.15.11.5666). EMH is NVIDIA GeForce Go 7600. Once, there was some information about dxgkrnl.sys?

  I did the Test of memory Windows at startup - no error.

  I scanned for any viruses: my AVG removed some Cryptor virus, but the problem is still there.

  The operating system is Windows Vista Home Premium SP 2.

  I don't know what the problem is. This is the driver of display or any other driver? Or maybe some powers of the problems? All advice welcome!

  > Anyway: I would like to know if the problem is hardware, or rather the related software, because I take my laptop to repair if there is something I could do download/resettlement.

  This question can be easily answered: you must install the Windows operating system.
  If the windows installation would be finished correctly and if you will not see another BSOD after installing, it emits so was related to the (software) system. But if the system is not possible or if BSOD would appear during the installation and after installation, then I suppose that something is wrong with the material of s for laptop.

• How does the DBMS_REDEFINITION

  Hello

  I noticed in the source of DBMS_REDIFINATION that it doesn't have the AUTHID CURRENT_USER as value. By default, it should be DEFINED.

  I'm just curious to know the underlying process. When the synchronization is complete and the structure is made (all objects of dep registered).

  During the procedure of finish_redef what is the process, which actually does? I can think of.

  1 lock the actual Table. Rename the Original table and dependants (indexes, constraints) to a temporary name.

  qstn: * how's the realized lock? What happens if an existing process is updated in the table and will be long enough to finish?

  2. rename the temp table and dependants dependants and real table.

  ** In this step, I guess that the lock is released?

  3 Rename the temp named table table of the interim and other objects of the dep.

  * Also runs with Annie SYS. so why do we need to provide (other than to run it on DBMS_REDEFINITION) grants the user running?

  It would be very useful that you guys can go through it and clarify my doubts. I appreciate the help.

  Kind regards

  Ru

  This not a feature of language PL/SQL or SQL issue - but a question on technology / specific database functionality.

  One must wonder within forum General Questions from the database.

• How does the virtual machine BACK to Windows?

  How does the NTVDM?  I run an old DOS program written in Fortran 77, which, with the exception of the database has not changed in 20 years.  It takes about 2 hours to start a business.  My boss told me that I can get a better computer.  Upgrading my computer 3 GB RAM maximum 4 GB will make a difference.  When I use the MEM command, I thought that the memory in use is what I take BACK used, approximately 1 MB.  Am I missing something?  More RAM can help?  Help a different CPU architecture?   The little knowledge by going to various sites, I have gained seems to tell me that dual core or quad processors are unnecessary because BACK is a single processor and use it exclusively.  How about a faster chip.  Is there a limit to the speed that is finished on the BACK.  Then addresses NTVDM maybe all these problems Unlike DOS itself.

  Thanks for your help

  Hello

  Your question better asked during the Forum of Microsoft virtualization, for more specialized assistance on this issue, please repost your request here:

  http://www.Microsoft.com/virtualization/en/us/community.aspx

  Kind regards
  Manasa P - Microsoft Support

   

• How does the trash?

  OT: Trash.

  How does the trash?

  It seems to be a "sandbox", but a reference to the storage space on each disk.

  I can't find a real situation for the trash

  If I delete a file from the c: drive or the drive e: is the deleted file stored in a different location or the renamed file right on the disc it came? (don't forget the BACK a deleted.doc file was just renamed $eleted.doc)

  Thank you

  In Windows 7, the trash is a named hidden system folder $Recycle.Bin.  There is a file with that name in the root of each of your partitions (e.g., C:\$Recycle.bin, D:\$Recycle.bin, etc.).  Within each of these folders are folders for each user in use on the machine account (there may be additional folders).

  When you double-click on the icon to the trash that is displayed on your desktop that opens is a composite of all files $Recycle.bin for the user account that is active.  In other words, you see the files you deleted all partitions of disk, but you will not see the deleted files of another user of your computer.

  If you right-click on the Recycle Bin icon, you can configure the space used for the $Recycle.Bin records on each partition.  The default size appears in about 10 percent of the first 40 GB on the size of the partition more than 5% of the balance.  As a general rule, you should leave the default size.

  See http://www.csee.umbc.edu/courses/undergraduate/FYS102D/Recycle.Bin.Forensics.for.Windows7.and.Windows.Vista.pdf for more details than you probably want to

• How does the "CHOOOSE DETAILS"?

  How does the "CHOOSE DETAILS"?

  In the box of dlog OPEN line; (top); You can add to your choicequestions relavant;

  You open the box of selctn 'CHOOSE DETAILS';

  If your choice is LOW, in the alphabet; by using the tab "MOUNT", IS TEDIOUS, one step at a time.

  Is there a way bettter?

  To the extent of moving upwards or downwards,

  You can also drag the list once they are in the display of the page.

• How does the online Flash Player Settings Manager?

  That's one thing, I've always been curious to know: How does the Flash Player Settings Manager ?

  It's a UI SWF running in a regular reader of Flash, but there obviously access to all kinds of Flash Player settings low level, a typical SWF is not.

  My first guess is that the user interface is in fact built into Flash Player, but then why would you go to visit a website to see? The SWF file is actually be served by the site Web and Flash Player's trust to the Web site to access a low level player not made public API?

  As a Flash developer for many years I've just been curious about this for a long time. Now that the Manager is obsolete by the construction in the settings (which is a lot less mysterious) Manager, I thought I would ask before it is completely forgotten.

  -Aaron

  Yes, the SWF is imbued with special powers, which are linked to the domain that sovereign wealth funds are served from.  The settings are basically just special LSO.

• How does the task before action?

  VSM 9.1.4

  MSSQL

  Hi guys! How does the special action forward in rules CBT works?

  In this scenario, where the dependent task will go if it is enabled by the CBT?

  1. Task Implementatation is initially assigned to GroupX
  2. CBT rules:
  • If the request Type TypeA, proceed to task, set state of StatusA demand and send the task to the GroupA
  • If the request Type is TypeB, go to the task of technical approval, the Request Status StatusB value and prior approval of the Group b

  

  When I tried to simulate this, the task of implementation was not sent to GroupA when the request Type TypeA. Instead, he was sent to the assigned group GroupX. Checked the CBT story and it seems that the rules that has task until the action was never carried out.

  Yes, that's all. I think now I know why it works the way you expect.

  I think that if TCC happens to any rule that meet its criteria of condition, it does not check any other rules in addition.

  So you specify different rules for different conditions, but not for different actions.

  And several actions (for example the Request Status value and before the task) can be combined into a single action like this:

  

• How does the Vswitch?

  Hello

  Suppose we have an Esxi host with 2 physical network card and a virtual machine running on it. without grouping of NETWORK cards NIC is chosen to forward traffic outside the Esxi?

  and I want to know in this scenario, how does the Vswitch? It sends the mac address-based frame? Let's say that the two network adapters is connected to the same switch.

  Thank you.

  If you don't want to use the pool (for some reason any) then creating vSwitches with only a single uplink or create multiple groups of ports on a vSwitch with multiple uplinks and override the order of failover on each port group to set vmnic active, standby and unused.

  André