Satellite P100: 5-in-1 reader with XD but not working with SD cards

Similar Questions

• Satellite P100-221: nVidia driver from Toshiba site does not work

  HEY!

  PLEASE PUT THE RIGHT VIDEO FOR SATELLITE P100-221 DRIVER!
  THIS DRIVER IS NOT FOR GO 7900 GS GRAFIC CARD!

  Hey!

  On the Toshiba driver page, you will find several P100 models.
  As far as I know Satellite P100-221 is a PSPA6E-xxxxx model.
  Choose the good laptop, then the right driver!
  I put t know what OS you use, but you will find on the site of XP and XP MCE

  Therefore, make sure that you are using the correct driver.

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• Satellite P100-487 - Upgate to 4 GB RAM did not work

  Hello
  I have a P100-487 with 1 GB of RAM (2 x 512 MB) on the inside.
  Max Upgateable is 4 GB.

  I bought 2 x 2 GB and it won't work.
  BIOS does not start with 4 GB.
  There is no problem with any of the two 2 GB parts. On both banks.
  Updating the BIOS with the latest version - the same problem.

  Someone at - it an idea?
  THX
  tgovsx

  In the past, many people have reported on such or similar questions after RAM upgrade. RAM compatibility problem.
  You must use 100% compatible modules and two identical modules.
  I ve checked page of Kingston and I found the info you can use 2 GB memory with KTT667D2 part number / 2G. Toshiba offers the same memory modules with the part PA3513U-1M2G number.

  The modules you use (manufacturer, part number)?

• Satellite P100-221: DVD Super Multi DL drive does not work properly

  Hello world!!!

  the problem is that one day I inserted my CD - RW in drive, launched Nero but failed to remove any previously saved data of him cause I couldn't push the button 'clean' (sorry, not sure he's called this version in English).

  In my computer, where all readers are collected, in the context menu for my drive I couldn't find option to erase the disk. In the properties of the label record disappered (label where I could mark the box: Alow CD recording).

  I also tried to burn many Cd - R with nero, I recorded using multisession with a small amount of data, but after this, I was not able to record something on their cause, they have all been closed and developed, too, I told nero ot not to develop.

  Maybe someone can help me, I don't want to reinstall windows.

  Hello

  I think that this is not a drive problem but possible it s more a configuration issue between Nero and second burning software.

  I think on many laptops Toshiba sound recording has now been installed.
  This software can be used for disc erasing and finalization.

  Please check the application.
  I put t don't know if this helps but maybe when you remove the sound recording now Nero does not improve.

• Satellite P100-277 by clicking on adapter and do not start

  My Satellite P100 does strange things. First it does not start at the top (the first time after it has switched mode all of a sudden, the second time, it's just did not start at the beginning of sleep), unless I removed the battery for an hour, and second the adapter makes a clicking sound when it is on the electronic card. Help! Who has an answer to this problem.

  Hello

  I don't think that the technician can help you
  What do you think???

  You said that the AC adapter makes strange noises?
  The adapter is maybe defective and dysfunctions and this may affect the functionality of the laptop

• Read out loud does not work on protected PDF

  Read out loud does not work on protected PDF

  The document is protected by word ("password protection"). There are two kinds of passwords with a PDF file.

  1. a password to open. This should be used to open the file. The file could have the safety limits.

  2. a password control. This is necessary to change the limits of security.

  If this file has no password open, but it has a password of control. Without it, "accessibility ay cibteby enabled: no authorized (e)" previous lire.

• I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I enable to save the mp3 files on my computer?

  I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I activate the Firefox save MP3s on my computer?

  Go to Options > Applications tab > MPEG Layer 3 audio(audio/mpeg) image search > use the "Save file" option on the menu drop down.

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Satellite P100: Memory Stick Duo Pro with MSD adapter is not recognized

  When I insert the CSDP in my Satellite P100-473-multi card reader - Vista preinstalled - (using an adapter MSD), the removable media is listed in the Solution Explorer, but the card cannot be read.
  With a 32 MB card, he pointed out that the card needs to be formatted first... but correct data are inside and must be visible.
  With 1 GB card, it reports that card is first inserted...

  Did anyone experienced this problem?

  Hello

  Have you checked the user manual you?
  Take a look at Chapter 8!
  There is information that the card reader is supported only SD; MMC; MS; Cards MS Pro and xD.

  As you can see that it supports the Memory Stick Pro, but not the Memory Stick Pro DUO!

• Satellite P100-286 - video RAM shared with RAM system

  Hello

  First note that I m French sorry for the bad English, I can use.

  I have a satellite P100-286 - PSPAGE (T7200 @ 2 GHz, 2 GB DDR2, Gef7900GS) and I noticed that some of the RAM (exactly 271MB) was reserved for the graphics card.

  I think that the graphics card has enough memory with its 512 MB, so I don't want to have a part of my RAM to be reserved for the Geforce. I have not found the way to reassign this small part of the system in the bios, and it is independent of the OS (I use Vista and debian and I see the booking even on memtest86) so I ve tried to flash with the latest BIOS but no change.

  Is there a way to 'recover' my memory?

  Thank you

  Additional question for fans of Linux: why can not I get sound on my laptop running Linux? :'(
  It seems that there is no error, but there is no sound even if the sound card, the "HDA Intel", seems to work perfectly, even with the latest updates of the kernel and alsa.
  I tried several Linux distributions, including Suse and Mandriva.

  Hello
  Unfortunately you can not affect the amount of memory shared by yourself since it is regulated by the BIOS/Chipset and depends on the amount of main memory that is installed.

  As far as I know that the shared memory is allocated flexible, which means that if a graphical application needs a graphics memory more then the system returns to the 271 MB shared memory. That's what I know of my machine... but I don't know, it might be different on other models.

  Otherwise I have no information on this shared memory thing. You can also see this article: http://en.wikipedia.org/wiki/Shared_Memory_Architecture

  See you soon

• Satellite P100-347 cannot find devices with Bluetooth

  Trying to get some devices connected through Bluetooth and I try to find the Bluetooth on a P100-347 district, but he isn't here. I used the BT stack on another machine and normally there is a Bluetooth Neighbourhood shown on the desktop, but not on my laptop.

  I took a peek in the test system as well, but there is nothing there... where it is spent, and how do I get that back.

  So I guess that you take on the 'interchange Information Bluetooth"which allows to Exchange files, vCards, and images with other Bluetooth devices. If so you can start it via the menu entry in the file of the Bluetooth program or by a right mouse click on the BT system tray icon and a selection of "Bluetooth information interchange.
  Very old version also had an icon on the desktop for him. I think that it is version 3. Now, it is located in the District of normal network. To get him back on the desktop, you can do the following:
  "- Mouse-right click on the Bluetooth-> Option... system tray icon-> Bluetooth information interchange-> click the radio button"Desktop"-> Apply-> OK.
  That's all.

• Satellite P100 - 160 PSPAAE Vista: all my Toshiba Utilities stopped working

  All of my Toshiba Utilities stopped working.
  Message appears saying "* stopped working" windows is looking for a solution.

  It was after that updates have been installed in the correct order as posted earlier in the forum. Not only the value added package configfree as well as PC diagnosis, etc.

  I have a Satellite P100 - 160 PSPAAE under Vista Home Premium.

  Any ideas? I think that perhaps is McAfee Security Center has something to do with it.

  Hello

  I suggest the following: recover your machine and update tools and drivers again. I don't know if McAfee is the cause of your problem, but if a system is broken on the software side, then, among the most popular and useful actions is to restore the system, and then being happy when it works again.

  Would appreciate comments on your success.

  Welcome them

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Satellite A210 - webcam built-in Chicony 2.0 does not work with MSN

  I have a Toshiba Satellite A210 or also known as the A215 to the United States. I have a webcam Chicony built in 2.0, but more often that otherwise, it will not work. When I'm on MSN, it will come back with the message saying that it is not connected or installed. He decides to work sometimes but most of the time this isn't.

  Even on portable real without using MSN, using Camera Assistant Software, the icon is always in the lower corner on the right, but when I right click on it and choose "Show Toolbar", I then click on "Start Camera" again, he will come even to the top. Or when it does, blue light comes on, then leave and then say "failure of the graphics rendering. And then I won't be able to use it on MSN. Even if I restart or shut down and run it then even once, it still not work.

  I went into control panel: System: Device Manager: Chicony USB 2.0 Camera and then I have a right and updated click Update driver software, however on my laptop, I already have the best driver software.

  I want to be able to use my webcam always whenever I start my laptop. Thank you.

  When you start your laptop Camera Assistant software stop and try to configure the webcam in MSN. I deleted the Camera Assistant software from the boot list and I don't use any but I can use it with Skype whenever I want.

  It also works with MSN. Just start the Audio and video installation and in step 3, select Chicony USB 2.0 Camera Cam that you want to use. It works with my MSN.