Satellite P100: "infrared remote hardware initialization failed.

Similar Questions

• Satellite L750, webcam integrated - application - initialization failed

  I recently got a new Satellite L750 laptop with built in webcam as a gift by my parents, who live in the United Kingdom, so I can stay in touch with them to the Ireland. We had hoped to call each other via video calls, but I can't get the webcam in the laptop for work. I click on camera app Web displays a message saying "Web Camera Application initialization failed; Restart the computer or web camera. »

  I have tried to download the driver from the web camera on the toshiba site and have updated the BIOS, but it made no difference.

  What can I do to get it working?

  I assume that you want to use Skype or some other messenger, right?
  For this application, you must not start application pre-installed Webcam. You can even disable the start-up.

  Can you please check if cam is recognized and listed correctly in the Device Manager and check if some messenger recognizes cam.

  Please post comments and we can continue this discussion.

• Satellite Pro L510 - question webcam - initialization failed

  Hello.

  I got my Satellite Pro L510 since February and the integrated webcam works perfectly until last week when I went to turn it on, but it came with the message "camera Web initialiation has failed.

  Please check your device and restart the application or your computer. »
  I then spent countless times, trying to find the problem, and I conclluded to the device itself, while the microphone works very well (which I thought was an attachment with the webcam).

  This confuses me for many reasons.

  Why was my camera works perfectly and then one day my computer can not recognize it? What has gone wrong?
  How should I do?

  Useful suggestions, answers or any reccomendations would be greatly appreciated.

  Thank you.

  It is not easy to say what the problem is there but what you can try is to remove the Camera Assistant software system and after restarting the laptop installed the last driver of the webcam, you can find for your laptop model on the Toshiba download page
  http://EU.computers.Toshiba-Europe.com > support & downloads

• Satellite C855: webcam not found - initialization failed

  * Hello.
  I have a Toshiba Satellite C855 and I had a problem because I spent in windows 7 64 bit (I was on 32 bits), the problem is that I can't find the webcam.and when I run the "Toshiba Web Camera Application" application in the device driver it displays this message:

  + the failure of the initialization of the webcam. Check the operation of the camera, and then restart the application or restart the computer. +

  I don't know what to do I just try to update the driver on the official website of Toshiba, also uninstalation instalation and all... nothing worked.

  Please help me.
  and I thank you in advance.

  Post edited by: soubou

  Is the webcam or any device marked with visible yellow exclamation point in Device Manager?

  Otherwise, the webcam module is defective and must be replaced.

• Satellite L870-124 web camera initialization failed.

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found. On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers from here but always got the same message.

  My husband has managed to find the webcam in the BIOS by pressing F2 when the computer has just been turned on. It has been shown as active, so it isn't that.

  I looked at how to find the Device Manager and have now found in the control panel under system and security. There is nothing here that looks like a web camera, not even by pressing the view and looking in hidden devices

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers.

  I tried pressing FN and F9, Mine isn't a small sign of the camera. That didn't seem to do anything.

  Can someone advise me in plain English, please. ?

  Hi Joanmiller,

  Thanks for posting your query in Microsoft Community.

  From your problem description, I understand that you cannot open the web camera, a message saying: could not initialize.

  I imagine the inconvenience that you are experiencing. I would like to see what more I can do to help our end.

  Follow these methods and see if that fixes the problem.

  Check if the webcam is listed under imaging devices.

  Method 1: run the hardware and devices troubleshooter. Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Try to use Windows Live Messenger and check if you can access the webcam.

  Refer to this link: using a webcam

  http://Windows.Microsoft.com/en-in/Windows7/using-webcam

  Method 3: Refer to the suggestions from this link:

  How can I fix my webcam?

  http://forums.Toshiba.com/T5/video-display-Knowledge-Base/How-can-I-fix-my-webcam/Ta-p/281393

  System Restore Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. If the problem persists, or if you have questions related to Windows please get back to us. We are happy to help you.

• Re: Satellite L870-124 web camera initialization failed

  When we arrived first of all our laptop, we have managed to find the web camera. We used it, but now I'd like to try Skype. The web camera is not found.
  On the start menu, it appears under "all programs" Toshiba"'media and entertainment'"web camera application. When you try to use it, we get a message saying that he was unable to initialize.

  I tried to download the drivers to go [here | http://www.toshiba.co.uk/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 3 & selSeries = 180 & selProduct = 7478 & selSh ortMod = 3399 & language = 13 & selOS = 30 & selType = 315 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = 315 & page = 1 & ID = 81921 & DISO = 30 & driverLanguage = 42] still but I got the same message.

  I tried to read forum entries that seem to be similar problems, but I do not understand some of the answers. Can someone advise me in plain English, please. ?

  Hello

  What webcam status appears in the Device Manager?
  The webcam feature is marked with a yellow exclamation point or it does not appear in Device Manager?

  As far as I know, the webcam can be enabled and disabled in the BIOS.
  So would recommend checking the status of the webcam in the BIOS too.
  Press F2 to enter the BIOS (when starting) go to advanced-> Control Panel settings
  You should see the webcam enable / disable option

• How to install Satellite A300 Infared remote?

  How to put in place the Toshiba Satellite A300 infrared remote control?

  I got a universal remote/infrared apple should work with all... but how to enable and configure the remote device from Toshiba?
  I can not even find the place to activate infrared on my laptop.

  Are you sure that what you're saying?

  > I got a universal remote/infrared apple should work with all
  Please don't be crazy about me, but you should take it too literally. This all should have the infrared signal receiver (IR port). Please use s operating manuals and check if that port is available on your Satellite A300.

  Following the logic of Apple it should also work with Ferro too. ;)

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Satellite L300 - T2FTP Windows sockets of initialization failed

  After login, I get the following message:

  T2FTP Windows sockets of initialization failed

  At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.

  Before that I did NOT add a new hardware device.

  Click the button start only generates a message: Windows Explorer does not react.
  It is impossible to call any other routine.

  Unfortunately I can not find my recovery CDROM.

  Are there opportunities to save my system?

  Toshiba Satellite L300 model PSLB8E
  Windows VISTA-32 bit

  Hello

  I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Re: Satellite P100-160 - failed display driver installation

  Satellite P100-160, PSPAAE, 32-bit vista.

  Today, Aero is not working and not available in graphics properties. Later installed the site of Toshiba UK, 15.0.1.1114 Intel display driver. This version was actually older than my current driver but I thought that maybe she was the only availabel that it must be correct.

  The driver installation failed with an error (no details don't just "year error has occurred"). Now, I don't have aero and my screen resolution cannot be set above 1280 x 800 - 1440 x 900 is expected

  To say that I'm pisseed would be an understatement. Can anyone help? Thank you

  Hey,.

  If Aero is not available I think that it s display driver problem

  In any case, did you remove the old display driver before installing a new? Go to Device Manager > right click on the graphics card > uninstall. After the restart the display driver must be uninstalled and you can start with the display driver installation.

  If you install drivers make sure you are logged in as administrator and antivirus/firewall is disabled. Reboot once again and you should be able to choose the native screen resolution now.

  Check this box!

• Satellite L350 - Webcam initialization failed

  I'm new here so not sure if I'm posting in the right place.

  I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.

  I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)

  Can anyone help please?

  Thank you
  Jan

  Hi Jan,

  I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.

  Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.

  Check this box!

• Satellite P100: HARD drive sometimes fails to start or just not responding

  I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.

  Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.

  Although it seems not take a long time.
  Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.

  What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.

  any ideas or help greatly received.
  David

  Post edited by: daviddean

  Hello David

  It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.

  It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).

  Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• Satellite L650 - camera initialization failed Web

  Hello

  I have a Satellite L650. I got it for a little less than 6 months and the other day, I turned on the computer to find the webcam pop up message saying "Web camera initialization failed etc... "I have also noticed that the microphone in too no longer works.

  I uninstalled it and re installed the driver, and it still does not.

  I was wondering if there is anyone who can help or has had the same problem?

  See you soon,.
  Dylan.

  Hi Dylan,.

  You can use the internal webcam with other applications like Skype?
  Have you installed the correct Satellite L650 webcam driver?
  What operating system you are using?

  If you have already reinstalled the driver for the webcam I advise to use CCleaner tool. It is a very nice freeware tool that can check your registry for the old registry keys and delete. If this cleaning software nice s to improve performance a bit and solve problems. Just use Google to find this program.

  Check this box!