Satellite P100 loses its next update

Similar Questions

• Satellite P100 - 442 PSPAAE - Bios Update

  After a Bios Update V4.50 30/09/08 (via Windows), there was a problem at the start of the laptop; automatically Windows tried a recovery procedure and the laptop could start.

  Via ' Toshiba Assist / Hardware Setup ' appears the new version of the Bios.

  This means that finally the Bios update was successful?

  Thanks for your help

  If the new BIOS version is visible, then update the BIOS was a success!
  You can directly see the BISO version in the BIOS or in the "Toshiba Assist-> configuration material too."

• Satellite P100: I want to update the driver, but I don't know the number of the system

  Hello

  I'm trying to upgrade the drivers on my P100, but I can't find the exact number of system.

  I noticed a bunch of them on the driver download page.
  We bought the system enough a few months ago and threw from the packaging etc.

  What do you mean by number of system?
  Model number, do you mean books?

  Well, everything need are the first 5 characters or digits of the model number.
  Then select the model P100 of law number in the Toshiba driver page and download it!

  The model number can be found on the bottom of the unit.
  Just check the labels.

• Satellite P100 PSPAD: could not update the BIOS 3.8 and a poor video performance

  Hello

  I have a video performance of bad quality on my machine as well as the fan power of the issues.

  To add to my frustration the WinPhlash program included in the BIOS version 3.8 empty out trying to flash which gives a PHLASHNT. SYS failed to load the message with different error codes (codes 5 and 147 depending if I launch the exe, as it is extracted from the ZIP, or run the files extracted independently).

  I checked all permissionings on the record and I definitely full control - but still a generic message of "check your accounts, if you do not have permissions please log in again!" is displayed.

  help with my problem of BIOS would be apreciated.

  [Edited by: admin on July 6, 2007 11:10]

  Hello

  but as the average it s absolutely the safest office upgrade firmware on at the level of the BACK. Or at least using the UBCD4Win, which is a beautiful cd live windows for maintenance.

  Welcome them

• BIOS update failed on Satellite P100

  Hello! I have a Satellite P100.
  Yesterday, I updated the bios with the latest version launch windows Xp. But unfortunately windows crashed with BSoD (blue screen) during the update process.
  Now I brick my laptop. When I try to turn it on, the power LED light but that all.
  What can I do to solve my problem?
  I am in Israel, and they are no Toshiba support.
  I fell alone... help me
  Help me..
  h....

  Hello

  Sorry, he says, but there is not much to do. You will need to contact the ASP (authorized service provider) in your country for assistance.
  If you are a lucky man, motherboard maybe isn't the damage and the ROM module must be flashed only.

  You will also find the Toshiba AEP in Israel.
  Please check this page of Toshiba and search for ASP in Middle East-> Israel
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Satellite P100 - impossible to get all the sounds

  Satellite P100

  When I updated the new driver for the card its conexant it cause its failure. I drove behind the driver, and then all is well again.
  Little pain and I've hidden the update.

  Toshiba has changed the hard drive and now I am totally unable to get any sound. The volume control is not the issue and the Device Manager shows no problems.
  All seem well except that I have no sound.

  Any help is welcome.

  Hello

  What operating system you use, and you have installed the laptop using the Toshiba Recovery disk?

  If you use Windows XP you have two install two hotfixes from the Microsoft Knowledge Base: KB835221 and KB888111.
  Two updates are integrated into SP3 and you need to install the patches first, and then the driver.

  In addition, you should try to install the latest driver on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least, make sure you use the latest version of the BIOS.

  Welcome them

• Satellite C660 continues to lose its wireless connection

  Hello

  We bought the laptop above for our son for Christmas and he continues to lose its wireless connection, we also have a satellite L450 that works well (not to lose the internet connection), we were on our broadband provider that they told us that the wireless connection on our other laptop is fine It's something to do with the C660, one of the pilots is in need of an update, unfortunately I forgot the name of the driver, but it's something to do with the modem, our son is desperate to use his laptop.

  Can anyone help?

  Try it please update driver WLAN.
  Latest version, you can find the portal of Toshiba WLAN > http://aps2.toshiba-tro.de/wlan/

  If you n t know that you need please exact notebook model poster or the name of the template for laptop.
  This info, you will find at the bottom of the thumbnail of Toshiba.

• Satellite P100: After BIOS update 4, 00-WINNER cannot use his & wireless card

  Dear all,

  I was a proud owner of the Satellite P100-437 4 months already, but last week I started having major problems with my laptop. First of all, next day after I bought the laptop with Vista, I get off my laptop for Windows XP SP2 and everything was fine. I had all this work and I enjoyed my laptop a lot. Last week, I checked Toshiba web site for new drivers and I downloaded the new update of the bios 4, 00 - WIN and apply.

  After the headaches started. Suddenly, I lost my sound, but in Device Manager the sound card works fine. In addition, the small light in the wireless switch is missing and then the wireless device, saying also in the device manager that works very well.

  I backed up all my data and reinstall win xp, clean and I installed the audio drivers and nothing has changed, the sound is still missing. Same story with the wireless. Yesterday, I've been witness to something else, I have attached an external hard drive, that is with usb connection and also usb power, and suddenly the sound and the wireless back for everything, but interrupting and finally disappeared again.

  So, now, I wonder what to do and any help on this is appreciated. I work on cruise ships and my laptop it is priceless.

  Deniz

  Hello Deniz

  I told everyone every time: Please do nothing while OS works well!

  Do not forget this. The problem is that your laptop comes with Vista OS and BIOS is also designed for Vista. You were very lucky to run Windows XP Home edition with success and now you updated the BIOS designed Vista yet. I really wonder not that you have problems now.

  What to do in this situation? It's very good questions. Try reinstalling the drivers for the sound and WLAN. Maybe this will help. Maybe clean install of WXP. I can't say for sure. I A200 (also Vista preinstalled) and I think that for the moment I have no interest in updating anything. Not yet.

  Bye and good luck!

• Update on the Satellite P100 (4200 RPM at 5400 RPM) HARD drive

  I had my laptop game Satellite P100-347, abandoned for a while now and want to give it to my little brother. This laptops come with 4200 RPM HARD drive and I would like to know if it is upgraded to a 5400 RPM / MIN 320 GB finally fails the system or am good to start!

  Thank you!

  Unfortunately, there is no public document on update on this model of laptop HARD drive and I can't say for sure but I believe that there should be any problem. If anyone post here own experience about these updates buy the HARD drive and test it.

  If there is a problem, you can send the HARD return drive.
  This info can be useful for other members of the forum. Because of this, please post the upgrade result.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Satellite P100 - v4.70 update BIOS stuttering in games

  Hello

  I had a problem with the Bios v4.70. Since I flashed my BIOS I had regular stops in my games. Looks like the game crashes every 3 seconds for a short time. I got the BIOS v4.50 before without problem. I would use v4.70 because since the new version of my graphics cooling fan card responses to temperature again.

  With recent versions, that I had the problem the fan worked only when I pressed the temperature of the gfx over 104 ° C. seems there is an emergency program that starts the fan and keep running at a constant average level. When I turn on my pc, I have to repeat this procedure. It's pretty boring, so I was very happy to see that the new BIOS has solved my problem. Maybe someone knows a solution.
  I know there are already discussions with stuttering in the game, but the solutions won t fit for me.

  I use a pilot updated the gfx, because Toshiba release new ones.
  My system is a Toshiba Satellite P100-354
  Processor: 2 GHz dual core
  gfx: geforce go 7900gs 512 MB with forceware v185.20
  OS: Win Vista 32 bit Ultimate

  > I use a pilot updated the gfx because Toshiba release new ones.
  I think that's the reason. No Toshiba drivers don t have overheating protection and therefore the graphics card may be damaged. It s recommended to use the drivers from the site of Toshiba, because with these drivers, you are on the safe side.

  Check the Toshiba website for the latest drivers and I think that the problem will be solved:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

• Satellite P100-196 - Bios (4.80) includes the update of the EC/KBC?

  Anyone know if the update of the BIOS of the Satellite P100 (4.80) includes the update of the EC/KBC? I downloaded the BIOS on this site and installed it but it does not show if the EC/KBC has been updated as well.

  If there is an update that is separated from the EC/KBC where can I download it?

  Hey mate,

  If there is no update EC/KBC special on the Toshiba site, I assume that it s included in the update of the BIOS. I've never seen such an additional update on the official website of Toshiba, so it seems to be a part of the BIOS update. :)

• Problem running 4,80 Bios Update on the Satellite P100-473

  Hello
  I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

  Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

  I guess that's a BIOS and a driver problem.

  Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

  I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

  While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

  The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

  I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

  If you have an idea thanks ;)

  Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
  You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

• After the last update of BIOS that Satellite P100 locks with BSOD

  Hello

  Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

  I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

  Microsoft advised me to reduce the video acceleration for video adjustment.
  Maybe can someone explain to me why I have this problem?
  I use the same drivers and software same as in the second update
  I can find BIOS previous to rewrite again, because this one works very well with my laptop?

  Thank you!

  Hi Sebasian

  I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

  As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

  If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.

• Question about the update of value added for the Satellite P100-160 package

  Hello

  I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
  I downloaded and unpacked. It contains three options:
  2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

  I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

  Can someone advise please that I should use?
  Thank you!

  Hi guys

  Value added package contains many different Toshiba and utility tools!
  Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
  This number can be checked on the bottom of the unit.

  I visited the page of the Toshiba driver and checked the details.
  You will find an info that this package installs a range of important public services.
  -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -TOSHIBA PC Di

  In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again