Satellite P100 - missing controller Ethernet

Similar Questions

• For Satellite P100 fan controller

  Hello

  I have a Toshiba Satellite P100 PSPA6A-01J017
  Dual processor Intel t2400 (1.83 GHz)
  NVIDIA gForce GO 7900 GS 512 MB
  1gig ram
  Under Widows XP PRO - SP2

  I searched the forum for a fan controller, with a poor result. I downloaded Notebook Hardware Control 2.0 and other similar monitoring software.
  Still, I can't control the fan. I often have my laptop on my lap, making the heat more worrying than the noise, the music is always enabled for max :)
  So if there is any way I can control the fan to work more and cool the CPU even faster, that would be great.
  I slowed down temp around 60 degrees now and the area on the side left (WSAD) is very hot.
  If I can change some thermal Tables or force the fan to operate on Max would be great. Anything to bring the fan to the top.

  In my opinion, no need to buy a cooling pad, as the fan must be turning at high speed if it does not, then I must consider that as a second option.

  Greetings and thanks
  Anders

  Hello

  It is a book of very high performance with high CPU and powerful graphics card.
  All the features of this produce a lot of heat. Also, I saw on the page of Toshiba, the laptop is very mobile and easy to use in all situations.
  How the circulation of fresh air should work properly? Fans and cooling modules must turn to ensure good cooling.

  In any case, on my laptop Toshiba Toshiba energy saver is responsible for cooling and control of the CPU module.
  I think the same thing on you laptop. Check the settings in the energy saver and set it up.

• Satellite A100: Controller Ethernet missing - which driver should I use?

  He miss the Ethernet controller and can not use my network card / W - Lan... ideas which driver download to fix the problem? Am running XP
  Thanks Anke

  Hello

  Go to this webpage and download this driver. This is the driver of network, also known as controller ethernet etc.. Hope that solves your problem.

  http://it.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=it&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 24 & selOS = all & selType = all & yearupload = & monthuploa d = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 19 & selectedLanguage = 24 & type = all & page = 1 & ID = 47467 & DISO = 10 & driverLanguag e = 42

• Satellite P100 - 444 PSPADE: need the Cardbus controller drivers and ultramedia for WinXP

  Hello, I have a Toshiba Satellite P100 - 444-PSPADE and I need Cardbus and ultramedia controller for Windows XP drivers, please.

  I did not find them on the official website of Toshiba. Thank you.

  Hello

  won´t you need them, the drivers for cardbus to be included in the utility/driver chipset from intel. Other stuff like flashmedia etc. will be installed when you install the flashmedia driver.

  See you soon

  P.S.: If you have already installed everything then check your device if Manager something is missing. If everything is installed, then relax and be happy.

• Need Ethernet driver for Satellite P100-425

  Map of Satellite P100 - 425 Ethernet does not work.
  What I supposed to do?
  LAN driver is not good on the page.

  Answer please

  Hello

  Driver Ethernet may be a driver for LAN card or wireless network adapter.

  Which driver do need it; LAN or WLan?

• Audio dropouts on Satellite P100

  I have a Toshiba laptop Satellite P100 PSPADE.
  OS: Win XP Professional
  Connected equipment: MOTU 828MKII Firewire or Terratec DMX 6Fire USB.
  In both situations, audio dropouts occur, using Cubase SX3.
  I already disabled some elements in the Manager of hardware devices, such as:
  -Microsoft AC adapter
  -Control compliant ACPI Microsoft method battery
  -Network adapters
  -Bluetooth device
  -Sound controller
  - ...
  Only the devices battery generated many audio dropouts, which are now reduced by disabeling the drivers.
  Nevertheless, sporadic abandonment occur always.
  Although, Terratec, and MOTU audio devices using the maximum buffersize, increasing latency, but reducing the school drop-outs, audio drop outs occur.
  Reading a few articles, I came to the feature 'gas CPU"of the Toshiba laptops, which might be responsible for these audio dropouts.
  The articles mention that he is a non-configurable feature of Toshiba.
  Audio dropouts seem to occure synchronous with the activation of the fan.
  To contol the latency, I use "DPC latency Check" program, which generates a bar graph.
  The peaks of bar-graph each time that the fan turns on and at the same time, a stall audio is heard.
  Is there a solution to the problem of audio dropout?

  Erik

  Hello

  There were MANY discussions on this subject, especially with your machine. Many users tried different solutions such as remove things from the device manager like you did already.

  In General, editing music with a laptop are not really optimal. For example:

  I have a computer of office machine with a Pentium 4 2.8/1 GB RAM/WD Raptor/ESI Juli @ and I also work with Cubase SX3. There is NO problem with the latency (latency DPC latencies around 15-30 microsec Watch).

  I tried to make some changes on my Tecra A9 which has a Dual-Core, 2 GB of RAM, a HARD drive with 7200 RPM with XP on it, etc... and at the beginning I had many heavy withdrawals.

  But after a search of this forum and a few other sites, Ive created a small tutorial:

  1. services:

  For Windows XP: Please visit the following site: http://www.blackviper.com/WinXP/winxp.htm
  and apply the configuration of services twisted.

  For Vista: Go to this site-> http://www.blackviper.com/WinVista/Services/ and see the following:
  -Configurations of Viper black Windows Vista SP1 Service-> twisted
  -Super Tweaks

  -In addition the client must disbale the service "smart card"!

  2 disable the following devices:

  -Compatible control method battery ACPI Microsoft
  -Intel ICH8M Ultra ATA Storage Controllers (including the optical disc drive)
  -Ethernet and Wifi
  -Storage-> Microsoft iSCSI initiator controllers
  SD card controller

  3 disable the powermanagement features:

  -In 'Device Manager' option to allow the computer to turn off this
  all "USB root hubs" should be unchecked
  -Create a separate powerplan who can be named 'Maximum' and put EVERYTHING
  maximum (disable these features like 'sleep' and 'sleep')

  4. run the application 'msconfig' (internal tool of windows) and remove all the
  unneded services and applications in the startup list, which could include
  some tools Toshiba as "configfree" "flashcards" etc., but at YOUR OWN RISK!

  5. as you have more network connections, you can also disable all
  services such as "Windows Defender", "Windows Firewall", "security policies."
  etc. which contains a large number of resources!

  6. I recommend to keep all the drivers including BIOS update. You can use
  drivers of Intel on the chipset/storage controller/graphic chipset
  which most are more recent so our pilots.

  -> Below only for Vista!
  7. at least, you must disable this thing together graphic Vista as
  «Aero, "Windows Sidebar", etc., and switch to the Vista Basic theme.» The window
  Manager themes Vista is necessary and a LOT of resources that offers more
  resources for applications and results also in a latency time reduced.

  8. check the Web site of the manufacturers on the updates support for the device that is in use! (which means the sound card ;))

  It could be that useful...

  Welcome them

• Need drivers of Windows XP Home for Satellite P100-429

  Hello
  I had to reinstall windows XP on my gf Satellite P100-429, but she lost the original disc, then when I installed the new XP there are the following devices lack drivers (they have the yellow question mark next to them) and I can not connect to the laptop to the internet.

  1. audio device on Bus High Definition Audio
  2. Ethernet controller
  3. mass storage controller
  4 controller Netwrok
  5. SM Bus controller
  6 video controller (VGA Compatible)

  Can anyone tell me where I can find these drivers, I searched all day for them.
  I guess if I can find it is just a case of putting them on a disk or USB and install them?

  Thank you 1 million.

  All the drivers, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads > Support home page. In the lower part are download drivers section.

  Archive option choose product type. Make sure you choose well model using just the part number PAxxx.

  Good bye

• Satellite P100-324: tone failure and stops with BSOD

  Satellite P100-324

  Built in modem HDAUDIO Soft Data Fax Modem with SmartCP
  Modem installed correctly to COM3 querry modem ok. diagnostic test "test Modem controller".

  But he has failed the test tone and stops windows with the blue screen. When windows restarts gives a warning "the system has recovered from a serious error".

  What should I do?

  Hello

  Try to remove all created dial-up and also remove modem from Device Manager. After doing this, restart your laptop. The modem will be recognized and installed properly again. Test the modem by using the option under the modem properties query modem.

  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Satellite P100-160: Question about upgrade HARD drive

  Hello

  I would replace the internal hard drive to a larger size, but I don't know who is compatible.
  Here is a link to dabs where they have 5 hard drives, but not sure if they will work.

  Would be nice to get some tips on this thanks.
  I have a Satellite P100-160 that currently has a 120 GB hard drive, it is not enough!

  http://www.dabs.com/ProductList.aspx?&NavigationKey=11154&NavigationKe y = 50540 & key = 40970000 & CategorySelectedId = 11154 & PageMode = 1

  Hello

  I downloaded the user manual for this laptop from the Toshiba page and it says that you can use the 160 GB HARD drive.
  I think that he n t be a problem to use a bigger like 200 HDD or 250 GB.

  Sat P100 supports a SATA HDD controller and you should therefore use the HARD drive 2.5 SATA.

  Concerning

• Satellite P100-240: Media Center Edition - error 3

  I recently installed the Toshiba TV DVB, set up all channels and guides, then recorded a number of television programs.
  Unfortunately, when I have pulled up my Satellite P100-240 this morning to check the last recordings of nights, the Media Center told me that I had deleted all of my recordings.

  I tried to get the library going again without success.
  All I get is a window telling me that there may be essential audio and video files missing and he said that I should quote "error 3" when looking for support. ".
  I tried reinstalling the drivers, etc., but it just goes back to "error 3' anyone able to help?"

  It is a very strange question. To be honest I really don t know what happened with you Windows Media Center software.
  It s a program from Microsoft and my personal experience, sometimes inexplicable things

  What you could do is trying to roll back the BONE to this early time!
  Eventually a point system restore has been created and you can set the operating system on this point.

  I also recommend to check your recorded programs.
  Usually programs stored is located in the following folder:
  C:\Documents and Settings\ all TempSBE TV
  Maybe you could save these files.

• No USB2 on Satellite P100

  My Satellite P100-227 running XP SHOULD have 4-Port USB2, but they have always functioned as USB1.

  I've updated with SP3 and chipset updates. Device Manager show controllers USB FIVE, of which four are USB1 and the fifth is USB2 enhanced (is this normal?-no idea what this fifth controller can be). Toshiba support suggest a system restore which seems a bit drastic, and I don't see that it would be useful that I NEVER had the USB2 feature.

  Does anyone else have this problem? All solutions?

  > I don't see that it would be useful that I NEVER had the USB2 feature.
  Even with the original OS that you have with your laptop computer (WXP MCE)?

  Sorry, but I can't believe this. Each recovery image is tested and I can't imagine that there is a problem with the original OS.

• Satellite P100-332: Upgrade HARD drive and 4 GB of RAM

  Hello

  I'm new to the forum...
  Well, I want to change 2 things on my Toshiba Satellite P100-332

  1. I have 2 GB of RAM at 533 mhz and I saw on Everest, as well as on the information that I put up. 4 GB RAM 667 mhz. If I want to ask if theres no limitation about to use a special brand of RAM? Or can I use any laptop RAM to 667 mhz? I buy 2 DIMM 2 GB 667, to stay with 4 GB RAM 667 mhz.

  2 - my laptop came with a 4200 RPM ATA hard drive and I want to know if I can change my hard drive to another as one with 7200 RPM SATA as a http://www.pcvonline.com/productDetails.aspx?prodID=7434 and I have not seen yet if the Board supports, but does anyone know if I can put one like this?

  Hello

  (1) the Satellite P100-332 RAM can be upgraded up to 4 GB and you can also use the modules of 667 Mhz because AFAIK the FSB supports 667 MHz also.
  But the fact is that Windows 32-bit (Vista and XP) would see only 3.2 GB due to the limitation of the 32 bit OS.

  (2) the laptop supports the SATA HDD controller and this is why you must use a SATA HDD. But usually it s no matter if the HDD SATA supports the 7200 RPM. In my opinion, you should be able to use these 7200 RPM HARD drive.

  Good bye

• Problem running 4,80 Bios Update on the Satellite P100-473

  Hello
  I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

  Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

  I guess that's a BIOS and a driver problem.

  Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

  I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

  While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

  The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

  I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

  If you have an idea thanks ;)

  Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
  You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

• After the last update of BIOS that Satellite P100 locks with BSOD

  Hello

  Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

  I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

  Microsoft advised me to reduce the video acceleration for video adjustment.
  Maybe can someone explain to me why I have this problem?
  I use the same drivers and software same as in the second update
  I can find BIOS previous to rewrite again, because this one works very well with my laptop?

  Thank you!

  Hi Sebasian

  I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

  As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

  If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.