Satellite P100: No external charger USB/Fire-Wire port

When I plug my ipod into my fire-wire 4 pin port or a USB port on my laptop (satellite P100), it fails to load, even when it is plugged into the mains / power of a/c. I think I've found where I have to go into 'control panel', but need assistance on how to allow my son fire and USB ports give energy and charge my ipod when its connected.

Any help on this will be greatly appreciated.

See you soon

Hello

The USB ports automatically provide the power. Each USB port provides usually 500mA.
But please note; the laptop must be running and the device external USB (iPod) must be recognized by the Windows operating system.

I put t know if the iPod is recognized by drunks, but I read many users have problems with the iPod on the Windows operating system installation. As far as I know that iTunes must be installed if you want to use the iPod.

Greetings

Tags: Toshiba

Similar Questions

  • No sound output on Satellite P100 with external speakers

    I have a Satellite P100 and just bought some new speakers. I never used the headset before decision-making and can't get to get all the sounds of the at all. I tried the speakers and headphones, but have had no luck with either.

    I guess there is a setting I need to change somewhere, but I don't know where he is. Any help would be appreciated.

    Hello

    Simply check the audio options in the control panel called sounds and Audio devices
    Check the advanced options and controls

  • Satellite C850D-115 - problem with USB 3.0 port

    Maybe you are my last chance to solve this problem.

    I bought a C850D-115 PSC9UE-00N00MGR without BONES. I've installed two times Windows 7 top on two different partitions.
    I downloaded and installed all the drivers needed from the Toshiba site and updated on day of Windows 7.

    My problem is, the driver for USB 3 AMD do not work,
    My 3 USB ports do not work and I cannot use it. It will work if I disable the USB 3 and use it as USB 2.

    Device Manager says driver is not installed, while AMD Catalyst Control Center says driver is installed and running.

    Someone knows how to fix this?

    Hello

    Toshiba technical page shows the laptop supports 2 x USB 2.0 ports and 1 x USB 3.0 port

    I m wondering how did you test the USB 3.0 and selected the correct port?

    You said that you have installed all necessary drivers have you installed all the drivers available from the Toshiba page?

    I found this [USB 3.0 driver v2.0.7.176 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7516 selSh ortMod = 3620 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

    Have you installed it?

  • Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

    It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
    All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
    He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

    Any guidance appreciated.

    Hello

    I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

    Product type OPTIONS
    Family CONECTIVITY
    Series of products DOCKS & DUPLICATORS

    You will find driver Package for Windows XP Home edition.

    By the way: perhaps some additional software for mouse blocks or a modem. Who knows

  • No USB2 on Satellite P100

    My Satellite P100-227 running XP SHOULD have 4-Port USB2, but they have always functioned as USB1.

    I've updated with SP3 and chipset updates. Device Manager show controllers USB FIVE, of which four are USB1 and the fifth is USB2 enhanced (is this normal?-no idea what this fifth controller can be). Toshiba support suggest a system restore which seems a bit drastic, and I don't see that it would be useful that I NEVER had the USB2 feature.

    Does anyone else have this problem? All solutions?

    > I don't see that it would be useful that I NEVER had the USB2 feature.
    Even with the original OS that you have with your laptop computer (WXP MCE)?

    Sorry, but I can't believe this. Each recovery image is tested and I can't imagine that there is a problem with the original OS.

  • Satellite P850 - 12Z USB 3.0 Ports right side do not work USB 3.0 speed

    Hi all

    I bought a portable Satellite P850-12Z with * 4 * USB 3.0 ports. Two ports on the left side and two ports on the right side with sleep functions and fresh.

    If I connect an external drive Verbatim USB 3.0 ports on the left side, everything works fine. Transfer rate is about 70-90 MB/s, but if I connect the * same drive * USB ports on the right side I see the pop up message "this device can perform faster if you connect it to a Super Speed USB 3.0 port" and the transfer rate is about 20-30 MB/s. These ports operate as USB 2.0 ports.

    I repeat that all the available ports on the laptop are USB 3.0.

    Anyone know what is happening with ports USB 3.0 on the right side?

    I don't have another USB 3.0 drive to do more tests.

    Thank you

    Carlos

    > I repeat that all the available ports on the laptop are USB 3.0.
    You are absolutely right.
    I ve checked specification s notebook, and all ports are USB 3.0 ports.

    It is not easy to say what the problem is here.
    What you can do is to contact the nearest Toshiba service provider and ask for explanations.
    They know what the problem is here.

    Maybe a few update driver or BIOS update offered in the future will solve this problem. In my opinion, you should continue to use the ports on the left side for data transfer.

  • Satellite P100-102 without digital-video output TFT-connection-Port?

    Hello

    We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

    On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

    Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

    Best regards
    Sascha

    Hello

    Sorry, but I disagree with you.
    Toshiba designs laptops that support the digital port (D-video output port)
    Check for example the Qosmio of E, F, G series.

  • x220i Express card with Fire Wire 400 adapter

    I would like to know if there is an Expresscard adapted for the x220i have a Fire Wire port.  I already bought one, but there is no slot in properly although it does not fit a portable older IBM that I have.  I need to download stuff with a video camera and do not want to buy the wrong thing again.  Any suggestion would be appreciated.

    Hello

    My understanding is that the X220i (like my X 220) has an ExpressCard54 slot, i.e., an ExpressCard slot, which is 54 mm wide.  The 54mm or 34mm wide ExpressCard should get into that, but old PCMCIA 16-bit or 32-bit CardBus cards will not, because they have different connectors.

    OWC, rain computers, SIIG, Sonnet, StarTech and SYBA are FireWire ExpressCard adapters that should work fine with your X220i.

    Kind regards

    Aryeh Goretsky

  • Satellite P100-276 - can't reinstall Vista from external CD drive

    Cannot install external CD drive Vista
    Options
    ? 15/03/2013 15:03

    My Toshiba P100-276 Vista Home Premium crashed for the last time, so I bought a new hard drive.
    Internal CD player had not worked for some time, but had happened before.
    It would always work again when I reinstalled Vista.
    Not now, however.
    So my pc - guy installed the new drive and tried to install Vista from my USB - CDRom-drive.
    Which has resulted in these messages:
    http://wikisend.com/download/996858/20130313_160410.jpg
    and:
    http://wikisend.com/download/363738/20130313_171457.jpg

    Googleing it, it turns out that you can solve this problem by changing the 'compatibility' mode in the bios, but not in MY bios.
    http://APS2.toshiba-tro.de/KB0/TSB0402V30000R01NL.htm

    Install a new CD player might settle it, but would be costly and complex at the same time.
    I'm writing this using Ubuntu, who btw had no difficulties to install from the external drive.

    All solutions?

    In the past, several people have reported the same problem.
    Also, are you using the original recovery disk or the Microsoft installation disc?

    The simplest solution is to buy the new optical disk drive. You can find it on eBay and it is cheap for this old machine. You can exchange it in 2 minutes, and everything will be OK again.

    In the user s manuals document you can find a list of all compatible optical disk drives.
    Satellite P100 is a fairly old machine, but if you use the original recovery disk it contains good SATA driver.

  • "Plugged in, not charging" Satellite P100-286

    Hey people, well I've been having this problem just now, I have a Satellite P100-286, OS: Windows Vista Home Premium and my problem is that after I m using my laptop for a little while on the current if I am it loads, it will stop charging and if I hover over the battery icon n the taskbar It will say "Plugged In no current charging" and the battery life will not be 100%.

    I also note that in this case, the light of battery on my laptop is not blue indicating the battery is full (of course), but neither is it orange indicating that he is in charge, but a few times I noticed that the light flashes when this happens not all the time. I played games with the power adapter plugged in and sometimes the laptop is off and when I turn it back on and "resume windows" warning message will appear saying 1% etc.

    Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

    I KNOW there are a LOT to READ IM SORRY... hehe... BUT PLEASE HELP: p

    > Please someone help and give me some advice on why my battery doesn't charge sometimes, I searched on the net about it and it is not the charger or the battery itself, but it's a hardware problem, people say, please someone kind and cleaver out there help me please.

    You should know that it is not easy to provide an exactly fault diagnosis without putting his hands on her.
    What we can do is to provide some sort of suggestions

    So I think it could be a faulty battery, so first the battery should be checked.
    If problems still persist, then electronic power supply failure might be possible

    However, the equipment should be checked and this can be done by an ASP in your country
    It would be desirable to communicate with these guys and ask for help

    Good bye

  • Satellite P100 - 221 PSPA6E: how to increase the RAM using SD or USB flash memory

    Hello

    I want to spend my memory (2 GB) more than that using SD memory or USB memory.
    I have this happen? If yes how can I to do?

    My computer is:
    Toshiba Satellite P100-221 PSPA6E

    Concerning
    Nevzat

    Post edited by: kanburnevzat

    Hello

    What do you do?
    Using Vista Ready Boost?

    If Yes, please check this page from Microsoft on the Ready Boost feature:
    http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspx

    If you want to increase your RAM, then only the memory module larger RAM would be useful for you.

  • Fire Wire USB or HDMI conversion

    I have a mini DV DCR - TRV cam / 900 (around 2002), who uses the fire wire 4 pin to transfer files.

    My new Dell laptop has HDMI, USB 3.0 and USB 2.0 ports. There is no expansion slot.

    How can I transfer video from the former mini-dv on my hard drive? I would store the files in .avi format and be able to change the video.

    If you have a PCMCIA or your laptop's ExpressCard slot, there are many available adapters that have a jack of FireWire/I.Link 4-pin - there are also USB to FireWire/I.Link cards - so shop around and you should be able to find what you need.

  • Satellite A200-23Z - HARD drive as external drive USB - how to access all the files?

    Hello!

    After losing the motherboard of my Satellite A200-23Z I need save some important files to hdd satellite. With external USB enclosure, I can only access some... Can't see program files, filesystem - really nothing disk system, a large number of files was on the desk...

    How to get full access to all the hard drive? -to all logical drives?

    Please - help... :(
    Ivars

    I put t understand what is happening here. I have old P200 (similar to yours but with 17 inch screen) and when I connect the HARD drive as external HARD drive to my new P500 I have full access to all stored data.
    There is no limitation at all.

    > was a lot of files on the desktop...
    Do you know how to find the right location for desktop?

  • Dualview on 2 external displays Satellite P100

    I just bought a Satellite P100 to replace my desktop computer is waiting for that, since it has two outputs for external monitor I could drive two external monitors simultaneously using DualView.

    It would seem that I have either:

    Internal display + display DVI connector

    or

    Internal display + screen VGA connector

    Is it possible to have:

    Display connector DVI + VGA connector display?

    Hello

    To my knowledge it of only possible to use an external output.
    Therefore, you should be able to use the DVI output with the internal display or the RGB port (port monitor)

    But it of not possible to use both DVI and RGB.

  • Satellite P100-286 - charge not completely even in stop...

    Hey all,.

    I have a Toshiba Satellite P100-286 and my problem is that when it s on and I plugged it load the light orange will be on indicating that the load and it will say connected load, but the battery life does not exceed 96%, yesterday he wouldn t go above 97%, and once again on the eve of 98% (lol) , the thing is when I have the laptop off and have supported (the witness orange still on indicate its charging) it will not load fully. When I turn on my laptop it is always 1% less than it was the last time I got it on as you can see by whats described above... I'm sorry for the long post, it of just quite difficult to explain.

    So can someone please help? Is it my battery what should replace is exhausting? Or is it something to do with the BIOS?
    Please help, thank you in advance for any response.

    Hello

    When the laptop is ON try to remove the battery and after a minute or two inside put once again. Please let me know what happens after that.
    To be honest, it is not easy to say why this happens exactly. I don't think THAT BIOS is responsible for this.

    Have you used the battery power intensively or your laptop worked mainly on feeding current?

Maybe you are looking for

  • the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

    the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.

  • Long Distance wireless transmission

    Good day everyone, I'm working on a project that is to acquire several scoops of many reservoirs, which are remote at least 500 km, then sending them to the monitoring Center (which is my location) so I can use them in my monitoring application using

  • What is a "device i/o error. (0x8007045D) concerning the transfer to an external hard drive to my new computer?

    I backed up the files from my old computer Visa on a 1 TB hard drive.  I now need these files on my new computer.  I have a Mac with Parallels (virtual Windows 7) running on it.  I get the above error when you try to copy the files on the Mac or the

  • MicrosoftOffice 2000

    My microsoft word has just stopped working.  The error message is the following: a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.  I uninstalled and then reinstalled the

  • Re: HP Photosmart 10 incompatible with print head?

    Hi pepsi66, your printer model has a removable print head, which is the part on the printer that feeds the ink sit in. It seems that the print head may have temporarily lost most likely full contact when supplies were removed and the new installed. H