Satellite P100 - problem during a restart after a software installation

Similar Questions

• Satellite P100 - problem with audio driver on Windows 7 RC

  Hi all

  I have an Australian original Satellite P100 P/N PSPA6A-02N021 (T7200 2 GHz, 2 GB DDR-667, nVidia 7900GTX, 1680 x 1050 display) on which I just installed the latest Windows 7 RC (Build 7100 uploaded on 6 May). After doing a clean install on a new brand Western Digital 500 GB drive, I've had trouble with no output its (error code 10) default driver Microsoft HD audo.

  Because it is a new installation on a disk HARD costs there is no internet connection to research the latest updates during installation. After completing the installation, the search for an updated driver or windows update cannot locate a better driver.

  I updated the BIOS to Phoenix Technologies V4.70 (drawn from the Australian Toshiba site).

  I checked the audio driver which worked perfectly under Vista Business 32 running on this same laptop, and it was Conexant HD audio driver v3.18.051 (dated 04/12/2006). I got this driver on the net and installed under Win7 RC. This driver installed and working, but now I only sound from the left speaker which is very (too) low level.

  What I want to know is, someone at - it else experienced this and how did you solve this problem, or that you have the same or similar Toshiba laptop and the sound works OK or is there another way to do it.

  Thanks in advance.

  Hello!

  I m asking you want to use an OS that isn't out yet and it s only a Release Candidate...

  Have you checked the sound settings on your laptop? Maybe the balance is only on the left speaker.

  To be honest, I think you should wait until Windows 7 will be available and you will find more recent drivers for it, they are compatible with Windows 7.

  Good bye

• Satellite P100 stops and then restarts

  G ' Day, my laptop starts up fine and then after a while, a few minutes to a few hours, it will instantly die without warning, then restart as if it was a new beginning. There are no errors of seizures.

  I had verified system, wiped the hard drive, changed the HDD and mem, I am runnimg XP pro.
  It is now in the bios ok, but when in windows it will shut down and restart. I don't think that this temp is a problem due to restart at 4 minutes. 3 years running fine, then this.

  Any ideas?

  Neil

  Jin

  You can stop due to overheating. you need to clean:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  If you do not have a jet of compressed air, you can use a vacuum cleaner (not the best solution to clean but better than nothing).

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Satellite Pro P300 - 05 X restarts after shutdown

  Hi all

  I've owned my laptop (Satellite P300/05 X, processor P8600 (2.4 GHz), 17 "display) now for 1 week and I was very frustrated with this problem, I will explain.

  After you have selected the option "Stop" (not 'sleep', not 'Hibernate' etc, but certainly 'closed'), the laptop goes through the steps of closing and then turn off all the lights on the keys of the finger, and then the led of the main switch turns off. And then for no apparent reason, Notepad starts again as as if I pressed the switch on! This morning was the worst, I went through the steps of closing 3 times! before he spent actually OFF... very frustrating, especially if you're in a hurry.

  Also, I noticed sometimes the led of the main switch does not at all off, all other lights are, however, but not the main switch... and then all of a sudden, the machine comes to life!

  Now, this problem is very random and happens not all the time. On average it restarts automatically, say 1 out of 7 times (except this morning!).

  As I said, this machine is very recent. It has Vista Business and I installed only a handful of programs (Eclipse/Java, MySQL... that's a bit). And I'm sure that this is not a virus or malware. In addition, I have not changed the BIOS settings.
  But I have disabled all the power options in the control panel (in other words, 'never' disable disk hard etc etc).

  Any ideas?

  Thanks a lot guys...

  Have you connected external devices of the laptop as printer, external HARD drive and so far?
  Interrupt them because that might cause the problem.

  Make sure you have wake on LAN in the BIOS and disabled Windows and you should also disconnect cable LAN and other cables.

  Check this box and try also to update the BIOS.

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Satellite Pro L40 PSL4BE automatically restarts after a stop

  Hello

  I have a question where my laptop start automatically after apparently past Hibernate and shutdown by closing the lid. (I have it set so that it goes into hibernation when I close the lid.)
  The strange thing is that this only happens when it is connected to the power supply. If I close the lid when on battery, it goes into hibernation and remains closed as it should.

  It all started when I changed my power supply mode of "Balanced" to the 'Performance '. Put back to "Balanced" didn't help, and not affecting the setting the lowest. In addition, he used to come back from hibernation automatically once I opened the lid, this happens is no longer.

  I'm not sure if it is a hardware or software problem.

  This weekend I reinstalled the laptop using the recovery disks provided and applied all updates and patches for Vista, but the problem remains, so now I'm leaning more towards it being a hardware problem, even if I have no idea what kind of hardware malfunction could be the cause.

  Does anyone have an idea what might cause this behavior?

  All of these parameters are well known to me because I use the Satellite P200 with Vista. I have tested almost everything about the parameters energy saver and everything works fine. Saving energy for L40 and P200 is the same and there is no difference. Because of this I really can't imagine that there is a hardware problem.

  I hope that you understand very well that you can set this for all profiles of three in two possible situations (on battery and plugged in). What should happen when the lid is closed belongs to Vista power settings. Try it please change all of these settings in the advanced power settings.

  To be honest, I think you make a mistake.

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?

• Satellite P100 freezes a few minutes after the beginning

  Hi all!

  Im having a little problem with my satellite. When I start my computer its TI all ok, but after 5-6 minutes, always do the same thing. The screen freezes and it is impossible to do antyhing. My computer is only 2 years old. My guess is that the cpu is overheating, but I'm not sure. Maybe problems with the fans or just for more dust.

  -Does anyone know if it could be another hardware problem that makes the computer freezes? Also when I try to just start all over again it freezes in 1-2 mnutes.

  Hello

  It could be overheating but maybe memory dysfunctions?
  After 2 years of work from the laptop cooling modules might not turn with maximum performance and so the CPU cannot be cooled correctly
  so you could check if the fan cleaning grids will help a little to avoid freezing.

  Additional test memory. There are several tools to test memory like MemTest or Memtest 86. These tools are free!

• My laptop toshiba custody judgment, critical problem and must restart after 1 minute. How can I fix it.

  It started when I was a manual removal of viruses, instructions included ending some processes in the Task Manager.  Apparently, when I ended a process that's when it started.  now, I have read some other forums on possibly solve the problem, but the computer stops before I can do anything. HELP ME PLEASE

  Hello

  You can access in Safe Mode - several times F8 tap that you start? See also repair system below.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite P100-286 with no display after installing drivers

  I reinstalled XP on my 286 P100, as I did a couple of times before and went about installing the XP drivers on the Toshiba site. I was installing video drivers when the screen went black. I assumed it was a regular part of the installation of the video driver, usually the screen goes black for a few seconds, but the screen remained black.

  I tried various commands on keyboard, but nothing has worked. So I restarted the laptop. Now, the display lights at all. I can't even an external monitor to show anything.

  Any advice would be appreciated.

  Hey,.

  Can you see photo when you in BIOS mode for example?

  If so, you should try to go into safe mode and remove the display driver. Maybe something was wrong due to the installation of the driver

• Power on Satellite P100 problems

  Hello

  I just had my second adapter percent machine and it sounds like a common fault with this model (P100-286). Is it possible to change the power supply of a 4 pins that I have now to single round pin that seems more robust that I have a second laptop, but not a Toshiba.

  My adapter is a 15V 8A and I know that you can buy a replacement with single pin socket, but y at - it a plug power jack compatible with this machine, I can use. If you can offer a model number or a link. Is there anyone who has had the same problem and changed the Jack and is successful.

  I also watched the power plug in my machine and it's a 2 red and 2 black wired connection that plugs into the mobo.

  No you cannot convert in a single dose, because you need 4 pins for 8 amps requires that the laptop.

  Single pin adapters are only 5 or 6 amps.

  Are you raising the laptop from the front when the adapter is plugged? This will put a lot of effort on the plug of the adapter and damage it.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Coverage on Satellite P100 problem

  The orange cover cracked on my P100 was repaired under warranty by toshiba. After about a week and a very prudent use more cracks appear exactly where they did before.

  My previous post on this topic has been edited since I mentioned lack of design.
  I've was right or not?

  Hello David

  As I see you write a few times since March on this theme and I also followed other offers similar. It's very nice that you deal with that, but I do not understand why you think it's the fault of design. In front of me, I have a P100-437. I think I opened the cover 100 times until ant now that it looks like the 1st day. I don't know how you open the lid of your screen, but I place my hand always in the middle and the pressure on the two hinges of the screen is the same.

  I don't know what happens when the warranty runs out, but be careful to this topic and contact service in good time.

  Bye and good luck!