Satellite P100 will not stay in hibernation mode

Similar Questions

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• A satellite series will not automatically enter hibernation/standby mode

  This feature to work on my laptop, but at the time (maybe 6 months), he started this problem. I don't remember any significant incident they coincide at the beginning of this problem. The computer will enter either of these modes and works fine if I manually turn them, but I can't put it so that they enter these modes automatically after a period of time. I tried to change controls for both the Toshiba utility and Panel options screensaver standard windows, but neither worked for a while. Any ideas?

  An application may be preventing the laptop to enter the Hibernate?

  I remember that PowerDVD did this on my laptop, so close all applications you can, then try again.

  If you have no luck, you may need to run the recovery to reinstall Windows.

  Also try a BIOS update.

• Satellite P100 will not feed or has white screen

  So, I have this laptop I missed about 4 months ago. Not feed the most. I can press the Start button and it looks like his work, but there is nothing on the screen. I can hear the fan from time to time, then a beep after about 1 min after 'start-up', but screen seems dead. Nothing appears on the screen at all.

  I tried with and without battery power.

  My laptop can become very hot and freeze that I remember.

  I replaced my Toshiba with another laptop but if my Satellite is not going to work again is a way I can get the files out there still?

  Thanks for your help.

  Hello

  > I replaced my Toshiba with another laptop but if my Satellite is not going to work again is a way I can get the files out there still?
  You need the data and files from the internal HARD drive?

  You can access the connection data the P100 HDD external USB HDD to the other computer.
  You could remove the HARD the P100 drive and could insert into an external USB enclosure
  I think that the HARD disk supports the SATA interface, so you have to get a SATA USB caddies

  With regard to the question P100;
  Well, it seems to be a hardware problem, we can only speculate about the type of dysfunction, but for me, it looks like a serious problem
  The best is to contact a technician for laptop and check the single parts

  Good luck

• My Satellite P100 will not read the SD/Media card after reinstalling XP - SP3

  I have a P100 and the model number is PSPA0U-1W0012 (this is what is printed at the bottom, it is a measure).

  I just installed Windows XP with Service Pack 3 on it because it was full of junk. I used the original recovery CD to install the drivers and installed the SD card reader driver, but it does not yet recognize the cards I used generally (xD and SD). To install XP, I used one CD other than the one supplied with the computer (I didn't want to not all of these free software that come with the recovery CD)

  I tried to look on the Toshiba online support, but I have found no information on the issue.

  Please advice, thank you.

  Hello

  First of all, you must make sure that your card reader driver has been properly installed and that the card reader works without problem and it appears in Device Manager.
  Second, you must make sure that the inserted cards are compatible and supported.
  I think that the details could be found in the user manual.

  By the way; I advise to always use the recovery disk because the operating system and drivers are always configured and everything should work fine.
  If you don't need some installed applications then you could easily remove it from the system. You can also use a free tool like CCLeaer to clean the registry after that some programs have been uninstalled.

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• Automatic update will not stay in automatic mode

  I apply automatic updates to automatic and start, then a Virus I assume in turn he returns to disabled so I can't launch the updates for Microsoft Security Essentials

  Note: We can see that the computer is badly infected. We must now determine how best to get it cleaned up. Please answer the following questions by number in your response:

  1. When did you first notice that automatic updates is disabled and that you could not re - activate? Was this before or after you had installed MSE?

  2. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? [Yes/No/don't know]

  3. were you running McAfee Internet Security , McAfee VirusScanor McAfee Security Centerbefore installing MSE?

  4. open Add/Remove programs and make sure that the show updates at the top box is checked. Now do scroll down and tell me who, if the following updates are listed:

  Windows XP security update (972270)

  Windows XP security update (978207)

  Update security for Windows Internet Explorer 7 (978207)

  Update security for Windows Internet Explorer 8 (978207)

  PS: Install MSE automatically removes Windows Defender on Windows XP computers so don't worry about this. In fact, even your McAfee application may have disabled Defender.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Envy 14 will not be in hibernation

  My machine Hibernate not reliable. It seems very similar to this post on the machine is not in standby mode:

  http://h30434.www3.HP.com/T5/lockups-freezes-hangs/envy-14-not-going-to-sleep/m-p/321738#M3895

  At work, I have a Kensington universal docking station which has a Display Link USB graphic adapter card / VGA connected.

  When I unplug the Universal Dock the laptop do not hibernate. When I leave it plugged in it will be in hibernation.

  After hibernation, neon House, start the system and trying to Hibernate (no dock at home) the laptop will not be in hibernation.

  When the laptop is not hibrnate the following occurs:

  The screen turns off.

  The hard stills in car and the fan is going.

  The key backlight still works (I can toggle keys market).

  I waited 10 minutes the machine put into hibernation without success.

  I went through the event log, a step seen anything related to that.

  How can I determine the cause the machine to crash during hibernation?

  Thank you

  Pei

  Hibernate worked sometimes, so this isn't a problem with it being disabled.

  I've upgraded to the latest version of the BIOS (A F.13) and now it works.

• My screen saver is set on various photos & first, they light up but they will not stay running

  Original title: screen saver

  My screen saver is set on various photos & first, they light up but they will not stay running, the screen goes black & I do not turn off my computer. I want pictures to be constinltly running.

  Hi mel merrill,.

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you receive an error message?

  4. do the computer in sleep mode?

  Method 1

  See the link below and run them the fixit tool available, check if it works.

  Windows Photo and slideshow problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2

  If the previous step fails, then you need download and install the updated drivers for the graphics card on the computer by visiting the manufacturer's Web site.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.