Satellite P20 Bios Update

Hi, as explained previously, I installed a new 100 GB HD in my notebook. Everything seems fine - until now.

My Bios is version 1.10 (Phoenix). I noticed, a new version 1.30 is available for about 12 months.
Can I update or just leave it as it is?
I can ' t see to find info, that the new version would be better.
One has known this update on Phoenix bios?
Best regards from the Germany

B.

Hi, Birgit

I agree with fixit742. The update of the BIOS is always a risky procedure. Evil
BIOS or a small fault during the upgrade procedure may damage the motherboard.
If everything works correctly, you n t need to upgrade the BIOS.
You know, never alter the currently running system ;)

Tags: Toshiba

Similar Questions

  • Satellite P20 S203: update BIOS after version 1.70

    Hello! I have a Satellite P20 - S203 BIOS is Ver1.70, published on 20/11/2003. I think there pretty outdated now, but there has been no new versions for years and I think that this great computer, despite the old, should be more supported. What I don't understand is why they made an exit for the PSP23E and not for the PSP20E, that make the differences that they should deserve to be updated bios different?

    Does anyone of you know about BIOS versions after 1.70 which allow the laptop to boot from SD cards or removable media? And that the problems of the management of multiple USB devices?
    Thank you

    Hello

    I use P20 over two years, without any update of the BIOS. If your device works well I recommend you to leave. Boot from the SD card is not possible and update the BIOS will not allow this.

    What problem do you have with the USB devices?

  • Satellite 1900 BIOS update of sentence

    After a recent blue screen, I got a message saying that I should update my BIOS. It is, whenever I tried it got in the middle of the door 6 then completely turned off.
    I'm running my laptop to the network, took each pci card and peripheral and still no joy. However, my laptop works very well even after the update apparently abandoned.
    Could someone either confirm that this is how the traditional update is intended to work, or give me suggestions on how to fix things? I think that it is version 1.4.

    Hello

    Please don t WHAT BIOS abort update not more because you may damage the motherboard of your Satellite. Can you please send identification number of all laptop (1900-xxx)?

    If you download the update of the BIOS there are also update BIOS Toshiba Description. Have you read it before treatment of BIOS update?

  • Satellite A100 BIOS update - BAD CHECKSUM

    I've just updated my BIOS to version 6.0 that TOSHIBA said > 26/11/07 "this Bios update adds functionality to your system: Satellite A100 Toshiba 6, 00 - WIN (PSAAN).»

    My original BIOS was 5.9
    My computer works fine A100-33 but when my computer restarts, showed it to the BLACK screen.

    I noticed that it displays BAD CHECKSUM and suugested I select default BIOS but I * ignored this advice * that wanted this new Version of the BIOS.

    What means BAD CHECKSUM and what effects will have on my computer peformance please if any?

    Under the system information that is displayed for my BIOS Version/Date Phoenix Technologies LTD 6.00, 07/12/2007

    Name of the Microsoft OS? ® Windows Vista Home Basic

    Hello

    Don t worry if the message "bad checksum" will appear only once.

    'Bad checksum' means that the BIOS has been changed, rewritten or settings have been restored by default. Thus, whenever you save your bios settings, bios made a "checksum" to check the next time you start the settings were stored and all goes well. If something is wrong or has been changed, then the checksum stored since the last save a Don t match real new generated checksum.

    So if you make an update of the bios, all your settings will be modified logic - you get an error "Bad Checksum".

    Another reason for such "Bad Checksum" is an empty BIOS stack or a malfunction, so BIOS cannot keep it s settings and you will get every time you start the computer a message "Bad Checksum".

    Welcome them

  • Satellite L300 BIOS update problem: "what BIOS is not for your laptop.

    I obtained through Satellite L300 laptop and I want to update its BIOS (current v1.50), so I downloaded the bios update v1.60 - WIN and when I run the extracted PS10160M.exe file - I get a message that "this BIOS is not for your laptop.

    What I am, I am doing wrong?

    PS: that updating the BIOS was suggested automatically after registration on the Web from Toshiba site via the serial number.

    UPD: it looks like autosuggestion fail: manual search shows that bios update 1, 60-win is not suitable for the model Satellite L300 PSLBCE. :-(

    Hello

    You used the wrong BIOS!

    The European driver Toshiba page provides a BIOS for this Satellite L300 PSLBCE series and the latest BIOS right now is 1.50!

    Currently, your laptop uses the latest version of the BIOS.

  • Satellite 110CS BIOS update diskette

    Hi, I have an old Toshiba Satellite 110CS and when I have it lit three days ago, I get a blank screen with a prompt to insert a disk in the BIOS update.
    I do not know what file to download on your site for the 110CS
    -is "s1110 - 150trad.zip" for s1110 - 150.exe?

    Hello

    I don't think it's the update of the correct BIOS for your laptop. It is very important that search you updates the BIOS under the "archived" category where you will find a specific update for Satellite 110CS for BIOS version 5.20.

    For access to this simply click on Support and downloads-> update your BIOS

    then in her-> product Type, select the appropriate boxes of files, family-> series of Satellite products - Archive-> Satellite 1XX, model-> Satellite 110

    This produces the download BIOS version 5.20

    Kind regards

  • Satellite A10 BIOS update needed!

    Hey guys, my Satellite A10 guard restart whenever I stopped him. I talked to my friend and he said there's a BIOS problem, and I should be updated. So I downloaded the latest version of Toshiba and run it. It told me to insert a disk. This wouldn't be a problem but my A10 is not a floppy drive then how am I ment to upgrade the BIOS of my computer without a floppy drive?

    Hello

    For your model of laptop ago just traditional BIOS update and you need a USB FDD for it. In my opinion, you can check on ebay or somewhere there FDD cheaply or you can contact the Service partner.

    It takes about 10 minutes for the BIOS update, and you can do it alone. It is very easy. As I said, check if you can find a used floppy drive. It cannot be expensive.

    Also, you can borrow one from your dealer or your business!

  • Satellite A200 - BIOS update and fan activity

    Hello..

    I have the Satellite A200-1AH (PSAE6E). I have installed the version of the BIOS 2.10 update and electric fans started working out loud. I want to install v1.30 BIOS (the best for me) but I can't find it anywhere. Can you help me please?

    I noticed that Toshiba has updated versions of BIOS 4 times in 4 months. So does that mean? I want to have the mobile rear silencer

    I guess the Toshiba engineers have changed some values in the new BIOS update and thereby you have noticed this problem of fan. I think they have a few reasons for this.

    If you want to have the old version of the BIOS, you should try to contact authorized service provider in your country. They should have.

  • Satellite A660 - BIOS update error message

    Just tried to update BIOS and get the following error message:

    Installation of UEFI winflash 0.02

    The program will be closed

    There is an error occurred, please check the items below
    BIOS version more than 200
    Battery capacity over 20%
    AC is attached

    Anyone have any ideas?

    HI ifw,.

    Can you post more information about this behavior? What version of BIOS you are using at the moment and what BIOS update you try exactly?

    BIOS update requires administrator privileges, so you must run the update as an administrator. Also unzip all the files to zip archive before you start the update.

    May I ask * why * you want to update the BIOS?

  • Satellite A660 BIOS update link does not work

    Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
    Unfortunately, the link does not work.

    I hope someone reads this part of the administration of technical assistance.

    Hello

    For PSAW3E:
    http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

    Run as admin.

  • Satellite L750 - BIOS update failed with error check

    Hello

    Update the BIOS to the L750 failled with an ERROR "CHECK". I downloaded the update to the BIOS again and got the same error.

    I wanted to submit a support ticket to do support technical namely that the BIOS update does not work, but low and behold, the creator of support ticket does not accept my model number/number combination.

    Thus, apart from picking up the phone, how can I get a message to Toshiba?

    See you soon

    Hey Buddy,

    May I ask why you are trying to update the BIOS? Do you have questions?

    As you probably know updated BIOS is always somewhat risky because it rewrites the ROM module and if anything goes not the ROM module can be destroyed and you are not able to start the computer. So this update should be made only if you have problems with the computer, otherwise forget it please.

    Remember: never touch a running system! ;)

  • Satellite M40: BIOS update failure is covered by the warranty?

    Hello

    I own a satellite M40. I had some problem with it, and tried to update the bios to see if he could he solved.
    I flashed the bios with the windows-based utility, but the shutted of the computer down without any warning.

    Now the laptop comes on only 1 or 2 and then put off the coast.

    I bought this Toshiba, 10 months ago. So, is an update of the bios failed outside the warranty?

    Thank you

    Hello Stéphane

    We can discuss your problem here, but nobody can help you. You must contact the Service partner and clarify this point. Sorry but there is nothing that you can do it alone.

    Contact them, explain the situation and see how they will take care of this case.

    Good luck!

    Incidentally: If you require addresses, you can find everything you need under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  • Satellite P30 BIOS update

    I have a Toshiba Satellite P30 with Windows XP service pack 2 and the Bios v.1.20.
    I downloaded the BIOS to version 1.40 from your site for my laptop (zip file of the bios-sp30-140win).
    But during the installation, I am asked to insert a floppy disk, but I don't have a floppy drive, I only got a dvd player.
    What can I do?
    Thank you.
    LC06

    Hello

    You need a compatible external USB floppy drive to update the BIOS.
    The document descripts Toshiba how to upgrade the BIOS on various Toshiba laptops.
    IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

    It is very important that you follow the instructions as a bad BIOS procedure may damage the jury!

    Good bye

  • Problem with Satellite A200 BIOS update

    I recently installed the alert software from Toshiba - through it, I received an alert to install software to improve my Satellite A200 1GH.
    After installing this software I've probably updated the BIOS and now I could not the computer because he wants a password already from the bios.
    I do not managed any password before.
    Please help me solve the problem! Is there a possibility of losing information with this situation?

    Hello

    No you can not lose any information, but in your case I would check for a more RECENT for your system BIOS version because there are some discussions were that other users had the same problem.

    A user reported that a NEWER version has been released and the problem has been resolved, but you should check for it here:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Otherwise, it would be necessary to set the machine to an authorized service partner. If you need a link to find the one closest to your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck

  • Re: Satellite A300 - BIOS update fails

    An error when I try to start the program InsydeFlash. The error is ' IHSI: support mode fail in SMI! I click OK. Another box is marked InsydeFlash and he says "BIOS does not support InsydeFlash! OK ". Upgrade farm without going any further. Laptop - Toshiba Satellite A300 PSAJ0E-00V00NRU.

    BIOS file * bios - 20091104120011.zip * downloaded from the official site. Current version of BIOS - 1.8, OS - Windows Vista Home Premium SP2.

    The update of the BIOS?

    Hello

    Load default settings in the BIOS before you start the update?

    If you update the BIOS make sure you are logged in as administrator and unzip all files from zip archive before you start the update.
    Close all running programs, also the firewall and antivirus and try to update again.

    By the way: why you want to update the BIOS? Is this really necessary?

Maybe you are looking for

  • How do the average of the last 5 values of a column as new values automatically entered?

    If the issue is not clear for you, here's a site I found that teaches you how do it on excel. ml https://www.extendoffice.com/documents/Excel/2533-Excel-average-last-5-values.HT    I can't find the corresponding method on the good numbers. Thank you

  • Portege R600 and Win7 (32 bit): driver WLAN is missing from the site

    I will install windows 7 on my R600, I am currently downloading the drivers on the Web page. However, on http://aps2.toshiba-tro.de/wlan/?page=downloads there is no driver for my Intel PRO/Wireless card. Should what drivers I use? The 32 bits of vist

  • HP LaserJet Pro M127fn MFP

    Has the HP LaserJet Pro MFP M127fn for about a week for business, now will not print fax rec'd, shows message 'Memory Supply warning', how do I fix this, please help, thank you.

  • Cannot access the WAP54G after firmware upgrade

    I have updated the firmware of my WAP54G v.2; We just started to use the AP again and when I checked, I thought I would update. I was going to 1.2 or 1.4 to the latest firmware using this link http://homesupport.cisco.com/en-us/wireless/lbc/WAP54G, v

  • file extension association to open only a single instance

    Hello I see this question posted in several forums on the internet, but I'm not able to find a definitive and functional solution. Here's the problem: When I do a combination of file extension to my request, if I select more than one file and then se