Satellite P200 - 1 K 8 - close and do nothing

Similar Questions

• Satellite P200 - touchpad Synaptics PS/2 and Win10

  I hope someone can help here.
  I have a Satellite P200 - 17 c, which I've updated to windows 10, overall, the laptop works like a dream except for a very annoying problem.
  My touchpad works but I can't seem to get the scroll button to work at all.
  I lost count of the ive solutions that have failed to make a difference try.

  does anyone have an idea what I can do to make this work?
  Ive been wondering if there is a newer laptop / still supported using the same touchpad as my 17 c whose drivers will work correctly in windows 10.

  any help will be greatly appreciated.

  Thank you

  Go to control panel and uninstall the driver of the Touchpad (Synaptics, Alps, momentum).
  Then run Windows Update to install an update to the touchpad.

• Satellite P200 - 17 c PSPB6E - battery and charger delivers

  Hello

  I was wondering if anyone can help.

  I had my laptop Satellite P200 - 17 c PSPB6E for about 2 years. For the last 6 months the battery and the AC adapter have been gradually getting worse.

  The adapter is now very loose and I need to hold it with one hand while using the laptop. The same battery with the AC charger in place does not increase (it shows 0% available plugged in, load). If the AC adapter slips, the laptop is dead and I need to recharge.

  Essentially, it seems the only thing keeping the laptop on, is the adapter (which itself is very loose).

  I need to know whether a battery or a problem with the AC adapter. I had only the laptop for a short period and would not have expected problems early.

  Thank you

  Baker

  Hello

  In my opinion, that your laptop is quite old (2 years) and these things can happen, mate.

  But I think you need new batteries and AC adapter or motherboard. If the battery doesn't charge with adapter connected the case is clear: the battery is faulty because she will not be charged.

  Regarding the connection of the adapter problem AC/DC it's hard to say because theoretically, it could also be a problem with the socket on the motherboard. This is why you should ask a technician for laptop. The technician can tell you what the problem is.

  Welcome them

• Satellite A200 - 1 M 8 close and then open the lid of the screen to start to work

  Dear community,
  A few months ago my screen has stopped working. I took an external display and worked this way. (laptop screen did not work at all, even not toshiba logo)
  All until once, I turned on my laptop, closed the lid and then he fired after 5 seconds (when all lights on), the screen worked normally.
  Since then, I realized that I have to do this procedure every time I am switch on, or way the screen does not work.

  So I have to close the lid and reopen it after 5 seconds (not less), whenever I turn on my laptop. It works like this for months already.

  Does anyone have a solution to this problem?

  Hello

  The FN + F5 key combination switches between monitors.

  Have you used this combination to test the display button?
  To be honest I m not very well if this key combination would be useful because it sounds like a problem with a display ON / Off switch (sensor).

  Usually such switch turns on and off the backlight of the screen if you close the lid

  This is why I would recommend this audit, but of course it's work is a technician for laptop

• Satellite P200 - 17 c freezes sometimes and the images have a red tint

  OK heres the problems...

  So year ago my computer crashed a lot, I am finally really bored with it so I erased the memory cool.
  Then after doing this, the problem has been resolved, but a new problem came.
  A red hue on everything I have not a clue of how else to to describe. The lines of each image for example a piece of grass has its image in red.
  It seems to just terrible and ruins all movies etc. which is annoying because im fond of youtube.com, I decided to open the laptop (which proved be a pig to open) and cannot find the problem, but when I closed the laptop and shake him a slight noise rattling at the top left of my laptop nearby speakers is here... (laptop = p200 - 17 c)

  2nd problem is that if I leave my laptop to go to a screen saver I will return to the laptop and it will randomly crash, crash not that I can't move my mouse but rather everything that says not responding do not and I turn it off because I can't do anything, has happened for about 2-3 months.
  3rd problem every time I charge the laptop, it is said that the camera is broken and it needs to be reinstalled... since it has never been installed, I don't know what's happening, it is built into the laptop!

  So, any help would be great

  Hello Adam

  In my opinion, you should contact the nearest authorized service (ASP) and speak with the technicians. First question graphic problem is for me the evidence that card doesn't work properly.

  What you can do now is to reinstall the OS with delivered Toshiba Recovery DVD.
  Test this with preinstalled OS clean and without any additional software on the subject.
  If the same thing happens again > ASP.

• Satellite P200 (PSPB6E) - screen LCD cleaning and new display drivers

  I have P200 almost 2 years (which means the end of a guarantee for me soon) and after about a year, bad pixels began to appear. I do not know exactly if all (it's more than 10 now) are in fact the bad pixels. Compared to other laptops Toshiba, I have always had lower edge of the frame of the screen a little loose (so he leans a little after I push in the middle of it and a lot of dust and dirt continues to fall below) and there was a time where I have even a piece of hair between the transparent cover of the lcd screen and the Panel itself (after a certain time it fell under the bezel by itself).

  I would like to ask, if it is possible to remove the transparent cover of the screen so I can clean from inside?

  I want to avoid a scenario, when a service provider told me that there is an insufficient number (according to the ISO standard) bad pixels for repair under warranty, so all that waiting to get the laptop to and return service was actually for nothing.

  Also, is there somewhere a new VGA driver for this laptop? There Radeon HD2600 and the latest driver download from Toshiba site is July 22, 2008. I also tried ATI.com but it's as if HD2600 was no model ATI. The standard Catalyst drivers for versions of office do not work and there is no HD2600 specialized drivers, except those of Toshiba. I think that this will become a problem even more acute when Windows Seven will be put in place and with a lot of users is no longer manufactured portable (and many of them ignored Vista if their material has enabled), will seriously consider trying the new OS and there is no VGA compatible driver for her, because some Toshiba forgets to update them and ATI seems that they don't care.

  Thanks in advance for any help with these.

  Hello!

  To be honest right now I n do what cover you average, but normally it s not necessary to clean the LCD from the inside.
  Also it of a bit more difficult to remove the cover plastic around the LCD and you really must pay attention to not destroy as this plastic is very sensitive.
  In my opinion the best way would be if you go to an ASP. For the moment, your laptop is still under warranty so that you should use to get a free repair of laptop. With more than 10 pixels dead, you should get a new view.

  On the Toshiba site, you can find the nearest authorized service provider:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  On the display driver: why do you need a new? I always use the drivers of Toshiba and never had a problem.
  What you can do is to get a cell phone which is equipped with the same graphic card. Maybe on other cell phones, a newer driver has been released yet.

  Good bye

• Re: Satellite P200: S-video/SCART-black and white TV

  Hello. When I connect my computer to my TV via a cable SCART-S-video, the TV displays only in black and white.

  No one knows how to fix?

  Have you tried cables SCART different?
  Not?
  Then check it out!

  I had the same problem and I could resolve it using other s-video/scart cable.
  The one I used was wrong. He had a bad pinout

• Satellite P200-1BA - HDD is faulty and Windows does not start

  Fujitsu HDD diagnostic tool returned a FAILURE result. Who should I contact to do what? Throw the HARD drive and buy another?

  The laptop was purchased in March last year and came up with this problem. It bothered me not far, given that the data written in these bad sectors and I have no problems. Because I accidentally deleted data, operating system written in these bad sectors and corrupts the data. Formatting the drive does not at all help, bad sectors are not detected by Windows Vista, only by the manufacturer's diagnostic tool. When asked to warranty on the manufacturer's website, it says it's expiration date is 10/09/10, but they do nothing about it, I have to contact the manufacturer of the system and tell him about this, because it's a VERY SPECIAL GUARANTEE: "serial number determined to be sold to a system with a single system warranty manufacturer and must be returned by the manufacturer of the system.

  Anyone any ideas? Or should I just buy another HARD drive. Thank you.

  PS: by the way, I'm not the only one having this problem for the same model of HARD drive.

  ´HI

  Just a question: why didn t contact you authorized service provider?

  I men if your laptop is still under warranty, you can get a new HARD drive for free. The ASP can order a new one and swap it out. All that s! :)

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If your computer laptop isn't under warranty, you must buy a new HARD drive. But the s HDD are not that expensive.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Question on drive recovery on Satellite P200-143

  Okay, guys, I bought a Satellite P200-143 at the start, and I have to get it back today, just to get rid of all the junk on this subject and when that I start, press F12 and it's fine. When the small black screen appears and it says "progress [insert here the percentage]' he always sticks to 54%.» I think it's because the disc has scratches on it.

  Does anyone know where I could download the installer of recovery of online? I am running Windows Vista by moving over it.

  Any help appreciated.

  Unfortunately, you can not download the image of Toshiba of all Toshiba websites.
  If you want to recover the laptop with the image, then you need to use the Toshiba Recovery CD.
  If your CD-ROM is defective then you can order it from the ASP in your country. To my knowledge it s not expensive.
  Talk to the technicians ASP and ask that compatible.

  Best regards

• Graphics went on my Satellite P200-144

  Hi guys

  ran cod modern warfare 3 on xp64, and it crashed. Rebooted but graphics were gone, I get a vertical striped screen, looks like that iv, e fried the chip.
  Tried to reinstall drivers, also in safe mode. Tried to format and reinstall but no go.

  I can't the graphic chip (nvidia 7600 go) replaced?
  Also tried via TV, same striped screen.

  In this case, entire motherboard must be replaced. Satellite P200 is old laptop model and, in my opinion, you should check out eBay to see if you can buy it already used mainboard or the same model with faulty display or something similar, so you can use the motherboard.

• Satellite P200-1JR doesn't do nothing - all the lights are off

  My toshiba Satellite P200-1jr someday is dead and it is like new.
  All the lights are off with battery or without or with only of food.

  Please help me. I don't know what to do.

  Thank you!

  Hello

  Don t think someone could help here in your case.
  No lights (power led, led battery nor ac DC plug-in led) means there could be a problem of serious material maybe the motherboard is missing.

  If the AC adapter is defective, then the laptop must always turn on using battery power ok, this is not possible if the battery would be too empty.

  So usually a technician first test adapter and should try to plug an AC adapter right in order to test this.

  But to me it looks like something wrong with a motherboard :(
  Of course, this is only my personal opinion...

• Satellite P200-1JV - screen begins to blink in different times

  Hello!

  I am owner of a Satellite P200-1JV since last week and three days ago I had a strange problem.
  My laptop * screen starts flashing * in different times.

  The flash frequency increases by 3.4 times to 10 +.
  In addition, the number of times to flash occurrence increases significantly.

  The blinking persists even if I do * not * activate any program.
  All programs are by default.

  Everyone knows the same problem before? Any solution?
  The graphic problem (ATI Mobility Radeon HD2600)? Or is it a manufacturing problem?

  Could you please help me?
  Thanks for in advance!

  What do you mean by manufacturing problem?

  It very difficult to imagine that how the display flashes or what might the case these flashing but it certainly looks like a hardware problem.

  If its hardware issue you will need to contact a technician from Toshiba for a fix. I think it's clear

  The P200 seems to be a new laptop and my knowledge, the guarantee must cover all
  So, don t waste time and ask an ASP in your country for a control from laptop

  Good bye

• Bad display on Satellite P200

  Hello

  My P200 under Vista has a terrible display, all the fonts are blurry and in general, the view is terrible.
  I tried to change the display settings of but nothing seems to make any difference.
  All of the suggestions.

  Thanks in advance, IanB

  I use the Satellite P200 almost a year now and all I can say is: use recovery media, install the original recovery image and be happy. I don't know how long you use your P200 and as you have driver display, but for your problem, I have three explanations:
  -You use some bad graphics driver
  -L' display is faulty or
  -You need glasses

  Please don't be crazy for my last comment. It has nothing with your person directly. I just wrote about my own experience. Satellite P200 has the glossy LCD screen brilliant (TruBrite) and using the standard display (1440 x 900) resolution image on the screen is quite clear.

• Satellite P200 - HD-DVD on TV

  Hello

  I have a Satellite P200 (PSPB6) for 2 months and I can't seem to play HD-DVD's on my TV (Philips 9632D/10 full HD). On my TV screen, in French "video format not supported".
  Do set up the display on the ATI card and if so, how?

  Thank you very much for your help.
  Polo

  Hello
  I hope that I can help you with your problem.
  I have the same laptop and he needs me through display ATI to get started setting up first plug in your TV via the HDMI cable, double click on the ATI icon in the taskbar. Click on advanced settings and click Display Manager (check if your TV will appear in the info box) if it is not detected, click view options and check the detection TV power button.
  Go back to the display manager and see if your TV shows? If she then set the resolution of your TV and click on apply. I then used the FN keys while pressing F5 to only display LCD TV options. I hope this is a help for you
  D3Xt3R