Satellite P200-144 never stop correctly using Vista Ultimate

Similar Questions

• Satellite P200-144 - lost profile user & Running very, very slowly

  Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

  I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

  On the advice of the internet and others, I tried the following:
  Creating a new user and copy my user data-error message back sying this did not succeed.
  Twp machine restoring previous dates separated - "error unidentified" who did not do so.

  Please help... anyone?

  > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
  Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

  Of course you should backup you files and important data because this procedure would format the HARD drive.

  I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

  Good luck and best regards

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• S-video feature is not available on Satellite P200-144

  Have a laptop P200-144. A clean installed Vista home premium to vista ultimate.
  When you press FN + F5, & I have no option available for external use.

  Any help appreciated. Installed the latest nvidia driver today.

  Hello

  > By pressing FN + F5 & I have no option available for external use.
  First of all, the TV must be connected to the laptop in the right way, then you should be able to switch to the external display device (TV).

  On the different s TV s-video option must be enabled before you switch the TV display

• Satellite P200-144: Touchpad works does not after Microsoft Windows Update

  Hello

  I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

  I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

  I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

  Someone has it has happen to them, or does anyone know of a fix for this?

  Kind regards

  Chris

  Hello

  a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

  Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

  Welcome them

• Why Age of Empires 2 does not work on my Satellite P200-144?

  I have a Satellite p200-144.
  I can't get to run, aoe2 something about directly?

  Hi mate,

  After things to do 2 AOE will continue to operate:

  -go to the microsoft website and download the latest version of directx. Download and install it.
  -go to the toshiba driver download site and download the latest graphics driver (if available). Download and install it.
  -go to the microsoft Web site and search for some updates for the game. Download and install it.

  Should help and make the working set...

  Welcome them

• Satellite P200-144: after upgrade to Vista Premium to Ultimate Chicony camera fails

  I upgraded my P200-144 of Vista Home Premium, Vista Ultimate and does not today have the Chicony camera. Despite reinstalling the driver and all other available remedies found on the internet and this site the camera still does not work. Any ideas anyone?

  Hello

  You post a question that has already answered several times!
  It of not necessary to send always the same!
  Use the forum search before you open a new thread advanced!

  But because you are new here I'm patience with you!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  Finally I expect some reward points ;)

  Good bye

• Some keyboard keys do not work correctly on the Satellite P200-144

  Hello

  I have a problem with my P200-144, when I type very fast missing keystorkes, this does'nt be as other keyoards.
  Also, my arrow is very steep.

  For me this is nothing strange. I have older Tecra M1 and the buttons are flabby. The new A200 (similar keyboard like the P200) it is not the case. The pressure must be stronger than on Tecra and if I type very quickly some keys are missing.

  Maybe you must type a little more slowly.

• Satellite P200-144: after upgrade to Ultimate Vista FN keys do not work

  Hello

  I've upgraded to Vista Ultimate and now the Fn keys do not work. Multimedia keys are beautiful, and execution of the program of Flash cards, but no Fn key. What should I do to get back them?

  TIA
  Geoff

  Like the first, you need to tell us which model of laptop you have.

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• Satellite P200 - 17 c - freezes at loading Vista

  Hi all, I have the following system:

  Satellite P200 - 17 c
  Intel® Centrino® Core 2 Duo Processor T5450
  Genuine Windows® Vista® Ultimate Edition
  DVD Super Multi (Double Layer) drive
  2 048 (1 024 + 1 024) MB
  17.1 "Toshiba TruBrite® WXGA + TFT display

  The issues I'm having is that when I start the laptop, it freezes at the loading bit Windows Vista. I so can't further.

  I did some research on the internet and he advised removing the DVD drive, and then start the laptop. I did and he'll actually past Windows loading, but then the screen turns white for a while, eventually he'll in CHKDSK - here it always freezes at 31%. I was able to access the Advanced Boot Options, but it freezes trying to get into Safe Mode. I don't have a disc of recovery at hand, however, I have a Vista OS disk, I can also access the BIOS.

  Please indicate how should I proceed? Thank you

  Hi masave,.

  If your laptop also freezes if you enter mode Windows safe, it seems that the OS is confused upward and you probably have to reinstall

  In your case, I'd do a recovery facility. You can use the function of your laptop HARD drive recovery. Go to the advanced Windows (F8) boot menu and select Repair my computer. The installation of recovery will begin now.

• Touchpad and bluetooth mouse on the Satellite P200-144 sensitivity

  I have a P200-144, with the Synaptics touchpad.
  I have also a Toshiba bluetooth mouse (the little mini one, useful for travel, don't know the model number).

  The problem is the difference in sensitivity between these two: for the touchpad, I need the speed of the pointer to about 80-90% in the mouse control panel in Windows (Vista Home Premium); the bluetooth mouse, to be down by about 20%.

  This allows using these two devices the boring time even if we need to adjust the sensitivity If you switch between them (which, given that they are both Toshiba devices, would have thought you they would consider the synergy).

  Is anyway to control the sensitivity per unit?

  Hello

  AFAIK, you can configure the touchpad and mouse settings independent of each other.

  The touchpad should be configured as:
  * Control Panel-> mouse-> device-> settings settings *.

  There you can choose the single options you want to change.

  Concerning

• Satellite P200 - 144 FN keys do not work

  Hello

  I have a dual-boot configuration, and I came across a problem. I have XP and Vista installed, and the FN keys do not work under XP. I had a look at the manual and it said something about Fn-Esse. Can someone help me solve this problem?

  Thank you
  Neo-Tech

  If I m not mistaken the P200-144 belongs to the series PSPBGE and European Toshiba driver page doesn t provided no details on the FN-Esse driver or something like that

  As far as I know the Hotkey Utility driver must be installed to control and use the FN keys.
  Also note that the driver installation procedure is very important.
  If you install drivers or utilities in the wrong order and then some features could not work as should.

  On the European driver page, you should find a txt file called installation instructions.
  Follow this order, and install as mentioned it.

• message, macromedia projector has stopped working on vista ultimate, never had a problem in the past. I tried tons of solutions that nothing works.

  Macromedia projector has stopped working, get this message when I try to play or install bigfish games. never had a problem, the recent past is only.
  my pc is vista ultimate
  tried several solutions, none works, very upset and frustrated

  Hi scooby65,

  Thank you for using the Microsoft Answers forums.
  a. do you receive any error messages?
  b. did you change to your computer recently?
   
  Try to temporarily disable all security software and check if it helps.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Also perform the following steps.
   
  Try these steps and check if this helped:
   
  1 left-click on start
  2 - right click on computer
  3. left-click on properties
  4 - left click on advanced system settings
  5 - running, click settings
  6. left click on the parameters of Performance data
  7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
  8. click on apply and then OK.
   
  Alternatively, you can try to install in clean boot mode and check if that helps.
   
  Steps to start in clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  Alternatively, you can try to uninstall and reinstall adobe flash player and check.

  For more information, visit the links below:
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  http://kb2.Adobe.com/CPS/191/tn_19166.html  
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support