Satellite P200-144: Resolution changes after waking up from hibernation

Similar Questions

• Satellite Pro L20: Showing empty after waking up from hibernation

  I've had my laptop Satellite Pro L20 a year now and it has been slowing recently, especially when starting after being in hibernation mode.

  It is even now not return back. I had placed it in hibernation, and then when I tried to turn it on again, it hummed as if it was put into service, but the screen remains blank.

  I don't think that he is in communication with the rest of the laptop. I tried to restart it several times but I still can't out of his inactive hibernation mode and the monitor simply unresponsive.

  Any help would be appreciated kindly!

  Hello

  > I've had my laptop Satellite Pro L20 a year now and it has been slowing recently,.
  Maybe you should clean the HARD drive and also use defragmentation application to optimize the data saved on the HARD drive.

  Back to your problem: I don't know if this will help, but you can try to do the BIOS update or install the latest driver from Toshiba support page display.

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• no access to internet after waking up from hibernation?

  I have a laptop HP G42 - 23OUS windows 7 Home premium PC. I bought ebay last manufacturer, was refurbished. Also, I use wireless internet. I totally love it, but on the one hand - whenever the computer wakes up from hibernation mode it does not connect to the internet! I have to restart the computer before it will reconnect to the internet, which the ruins completely the whole mode of hibernation in a first time!
  To avoid this problem, I changed so that while that plugged power settings it will never go into hibernation mode & rather will just idle until I have press the key again. That said, it is no longer a huge problem, but I'd still like to know why this happened & what, if anything I could do to fix?
  Thanks for any info you can give me about this someone ' one/everyone!

  Hello:

  Here is the link to the latest driver for your Broadcom wireless card. (as of 02/13/12).

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102505-1&cc=us&DLC=en&LC=en

  If all goes well, the problem will be solved.

  Paul

• NVidia Tecra M7 resolution changes after waking up

  When my Tecra M7 is open after standby or hibernation, the resolution switch to 1024 x 768. SOMETIMES it changes automatically to 1440 x 900 after a few seconds, sometimes it doesn't. If all the seconds time or so I have to manually adjust the resolution again.
  OS: Windows Vista Business
  Video: nVidia Quadro NVS 110 M, pilot 7.15.10.9813
  BIOS: 3.20

  No I think it is a driver related problem, so it should be solved with the newer bios/displaydrivers.

  If it s really software related, then M$ should have a fix or something else, but then users will have to watch the M$ Database.

  Welcome them

• How to get higher on the Satellite P200-144 resolutions

  Hello

  The X 200 is released a few days ago. I read the card and he said the support for the resolutions of screen until 1680 * 1050. Since the P200 has the same screen is there anyway that you can go to these resolutions?

  Hello

  I agree with Johnny. You can use only the display resolutions that appear in display properties.
  Unfortunately, the other resolutions are not selectable.

• Satellite P750 - resonding stops after waking up from hibernation

  If anyone can help, I recenty purchased a P750 Satellite equipped with an i7 processor it has 4 GB of RAM. I was experencing problems since buying it. It seems to just stop responding the round icon turns showing his thought but I can wait 10-15 minutes and there is no change. This problem occurs sporaticly and sometimes occurs when loading new programs. The problem happens almost all the time if he entered hybernation and when I wake with the mouse, it starts but when I have to connect to the net, for example, he will bring to the top of the page of internet explore and the round icon will be spinning and it will stay like that for centuries until what I am forced to close it with the start and stop button. When I have this problem I have tried using CTRL ALT DELETE to open the Task Manager but the Manager tasks will not respond.

  If anyone has had the same problem and is there a solution. Note When I turn the disk protection mode HARD the probem seems to happen less frequently but persists.

  Hi captain101,

  Wait a minute, please. Icon of what you mean exactly? I don't know what you're talking about, so a more detailed description of this icon would be useful.

  The more you use the version preinstalled Windows from Toshiba or your own installation?

• Computer is unlocked after waking up from hibernation

  My computer is unlocked when he wakes up after hibernation, it's that everything works well, but these last days, it is weird. I tried to restart my computer in Eve extended and checked again and same thing.

  Well, I only came here for a workaround, really.

  Found the fix here:
  The option is grayed out, had to reset it.
  Fixed now.

• Satellite P200-144: Touchpad works does not after Microsoft Windows Update

  Hello

  I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

  I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

  I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

  Someone has it has happen to them, or does anyone know of a fix for this?

  Kind regards

  Chris

  Hello

  a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

  Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

  Welcome them

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Why Age of Empires 2 does not work on my Satellite P200-144?

  I have a Satellite p200-144.
  I can't get to run, aoe2 something about directly?

  Hi mate,

  After things to do 2 AOE will continue to operate:

  -go to the microsoft website and download the latest version of directx. Download and install it.
  -go to the toshiba driver download site and download the latest graphics driver (if available). Download and install it.
  -go to the microsoft Web site and search for some updates for the game. Download and install it.

  Should help and make the working set...

  Welcome them

• Satellite P200-144 - lost profile user & Running very, very slowly

  Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

  I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

  On the advice of the internet and others, I tried the following:
  Creating a new user and copy my user data-error message back sying this did not succeed.
  Twp machine restoring previous dates separated - "error unidentified" who did not do so.

  Please help... anyone?

  > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
  Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

  Of course you should backup you files and important data because this procedure would format the HARD drive.

  I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

  Good luck and best regards

• T410 - washed out colors or lines after waking up from suspend

  I have a strange problem with the display on my new Thinkpad T410. I don't know yet how to describe. Red, green and blue still exist, like black and white, but the brightness between the two levels are washed out or banded. I tried to take pictures of some color models to demonstrate.

  Most of the time, the screen works as I expect. Sometimes however (especially after waking up from his sleep?) the gray borders around things seem too bright and washed out colors. When this happens, he persists and worsens slowly over time.

  If I change the brightness of the screen from top to bottom with Fn + start/end, the effect will change randomly to each pressure, sometimes changing to something even worse, showing a lot of color, strips or almost monochrome, but then to the lesser model, but will always go wrong.

  Not affected by:

  • Change brightness
  • closing cover
  • move to the rear and projection screen
  • locking computer
  • Changing resolution
  • change refresh rate
  • change to 16-bit color
  • tapping or screen rotation

  Didn't happen since I installed the new BIOS.