Satellite P200-14O: can't see my own WLAN

Similar Questions

• Need drivers XP for Satellite P200-14O

  Hello! I need driver xp for this model (Toshiba satellite P200-14O pspb0e) or can I use driver some someone else?
  Any suggestion or help? I would be very grateful!

  Hi Dalibor

  At the present time for computers laptops European drivers of Windows XP Home edition are not available. I checked the support page and there is no drivers. Only thing you can do is to try to find drivers Windows XP Home edition on the support page equipment manufacturers.

  I recommend you wait a bit. I A200 and still wait for drivers of Windows XP Home edition.

• Satellite P200-10O: can't send emails using Windows Vista Mail

  If anyone can help.

  I have a Satellite P200-10O, with Vista installed. In Win Mail I have configured my email as usual accounts.

  When i open Win Mail I can click on send and receive and he's looking for new messages, this can be repeated as often as you like. However, when I create a new message and click send it to stop working. The message is placed in the Outbox, if I open the Outbox and click on send, nothing happens, after awhile of trying every thing is blocked. If I then close the program and re open it will send the message but then sometimes send it and receive does not until you close and re open. Also message counters do not update.

  I tried everything I can think of, Vista, ISP, Toshiba forum. So far, no joy even if I'll get back in touch with Toshiba again. Message is configured to send immediately.

  No virus or firewall is used.

  See you soon
  1stopcarp

  Hi guys

  I think you should take a look at this Forum topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27336

  It is not a beautiful link to FAQ from Toshiba on the question paper + the will of Windows Mail Send or Receive emails.

  In addition, you should take a look at the support site for Microsoft Mail.

  Good luck

• Satellite P200-1 - can I use 2nd HARD drive?

  Hello

  I am always working on my Satellite P200-1 and now, my HDD1 is full.

  I see that there is a location for a second HDD. But I can't find the plug!

  Therefore, it is possible to connect a second HDD on my satellite P200-1BY? Because I bought a new HARD drive and I can't plug it, I only have 7 days to return the HARD drive to the store.

  Thanks for your replies!

  Hello

  If the connector to the second HARD drive is not available there is no way to use two internal hard drives.
  This HARD back and buy HDD external, placed in the HARD disk box. This HARD drive you can connect using the USB cable and it is the best solution for you.

  I guess that HARD disk internal, you have lots of data that you don't need every day and you can save it to external HARD drive. So you can do free space on the internal HARD disk.

  I do the same.

  Good bye

• Can not see my own account after reboot

  After reboot I can only see the original user on my Mac + comments, but not the one I added.

  The original is my wife so if it connects inn, first of all, I'm able to move my user by logging out (users obtained all visible) or by selecting my self in the menu to the left of the projector users.

  Upgrade to 10.11.4 to see if there was a problem with 10.11.3 who was present when the account is added.

  It's annoying to sort of not finding your own account and I wonder what's wrong.

  Anyone with an idea?

  Hello dusanofrode,

  Thank you for contributing to the communities of Apple Support.

  If you cannot connect to the original account on your MacBook Pro, looks that FileVault has been activated. It encrypts the bootable floppy and requires that the original to "unlock" before user other users can subscribe in their user accounts. I can see how that might be irritating in the circumstances, and I have a few suggestions to check the situation and helps connect you to your account a little more quickly.

  To see if FileVault is turned on, connect to the user account of your wife and choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault. You can find more information about FileVault in Use FileVault to encrypt on your Mac startup disk.

  If FileVault is turned on, you have two possibilities to be able to connect to your user account to start.

  • "Activate" your user account to connect to start up the Mac. You can do it in the preferences of FileVault (located under Security and confidentiality in system preferences):

  Allow users

  Click to enable users to log on at startup and unlock the encrypted information on the Mac. Users who are not enabled need an administrator to log on before you can use the Mac.

  Of OS X El Capitan: FileVault pane of security & privacy preferences

  • Turn off FileVault:

  When you turn off FileVault, the encryption is disabled and the contents of your Mac is decrypted. Decryption may take some time, depending on the amount of stored information. However, you can still use your Mac to perform other tasks while the information is that is decrypted.

  1. Choose the Apple menu > System Preferences, click on Privacy & Security, and then click FileVault.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on turn off FileVault.

  4. Click on disable encryption.

  Of OS X El Capitan: turn off FileVault encryption

  All the best.

• Satellite P200 - where can I find the SATA driver?

  Hello

  Sorry, I'm new here.

  I also have a SATA for my Satellite P200 (PSPB3E) driver for XP on my hard drive (for installation).
  Where can I find a driver with ini?

  Greetings ralf

  Hi and welcome to the forum!

  For your laptop, you can get all the drivers on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The driver package is called Intel Storage Manager.

  In addition, if you are looking for here one bit you can find hundreds of discussions about this. It s really not complicated to use SATA drivers! ;)

  Good bye

• Satellite A200 - I can't see battery time remaining single percentage

  Hello

  I had a Satellite A200 on Vista and XP, and I'm NOT able to see the remaining estimated battery time. I see only the percentage left.

  For example, I use my laptop unplugged for over an hour (my comments) and I can only see the percentage left (45%), but I can't see the time remaining.

  I have a problem with Vista or XP.

  Is - this natural? What can I do to see the time remaining?

  Thank you

  Diego Alvares
  Brazil

  Sorry, but I would like to know why you think that this is a problem. Where you found information that it must be demonstrated to remaining battery time?

• Satellite L20-101: can't see my WLan access point

  Hello world

  I have a L20-101. It worked well until we change our AP with 802n Apple AP again. I can see any other network, but I can't see mine.
  Any idea?

  Thank you

  Hello

  Yes, I have an idea ;) How about you change the WLan card?
  Seems that the new access point is not compatible with the wireless network for laptop card.
  Maybe the minPCI wireless network card does not support the standard wireless access point.

  What do you think?

• Satellite L350: How can I create my own recovery disk

  How can I produce my own system recovery disk?
  Windows system keeps asking for a disk system that I don't

  Any advise?

  Hello

  I put t know what you mean exactly?
  You can create a clean Toshiba Recovery disk using the Toshiba recovery disc creator software.
  Its preinstalled on your laptop and after the creation of the recovery disk you can use for installing the OS.

  The Toshiba Recovery disk will NOT request a floppy disk!

• Satellite Pro 6000: can't find the right WLAN driver

  Hello
  I have re-installed Windows Xp on my laptop Satellite Pro 6000. Everything works except for the wireless connectivity.
  When we look in the Device Manager, I see that the WLAN driver has not (or wrong) was installed.
  Then looked at the Toshiba site for the drivers, but I am not able to find the right one. I found some drivers, which seems to be the one, but unfortunately after installing the drivers, wireless connectivity is still not available.
  Any help would be appreciated.

  Thanks in advance.
  Best regards, Robert

  Hi Robert

  Stand by! Connectivity is not available or the WLAN card is still not installed correctly in the Device Manager list?

• Satellite L500 - I can't see integrated Intel HD Graphics in Core i3 - 330 M

  Hi all

  I have Satellite L500 laptop computer with processor intel i3 - 330 M
  the specifications [page | http://ark.intel.com/Product.aspx?id=47663] said he joined the graphics chip HD but I don't see in my device list or anywhere else
  How can I turn on or whatewer?

  Hello

  Satellite L500-xxx was equipped with an additional graphics chip (I guess that he s ATI GPU).
  Why you want to use the chart of your processor, if there is already another GPU?

  I m assuming that this integrated graphics chip HD would work only if no additional graphics chip would be available on the mobo
  Also, I found this notification on the page of Intel:

  + Intel® Graphics Technology offers you an experience visually optimized for Blu - ray * and HD video with Windows Vista * support¹ and comes standard with many laptops, mothers and desktop cards * without needing to add an external and costly graphics card * +.

  and this:

  + Integrated Graphics are not available on all computer systems. Please see the specifications chipset, motherboard or system compatibility +.

• can not see my own website

  I have a new site online since this week.
  Everyone can see the site online, except me. I get the message:
  NOT FOUND
  the URL requested / admin on this server was not found.

  What can I do to fix this?

  Try to disable IPv6 or try another DNS server.

  • http://KB.mozillazine.org/Error_loading_websites#IPv6
  • http://KB.mozillazine.org/Error_loading_websites#DNS

• Satellite P500 - 14L - can not see the mouse when you play the game

  I use P500 - 14L, the graphics card is NVIDIA GeForce GT 330 M with CUDA technology. Unfortunately, when I play C & C 4 game, I do not yet see my mouse cursor.

  Did anyone had this problem before? How can I sort?

  Hi vincentcky,

  This only happens on C & C4 game or with other games too?

  You should look for a patch for this game. You can find it on the site of the factory.
  Additionally, make sure that the latest version of DirectX is installed.

  Last but not least, it would be interesting to know what operating system you have.

• Satellite L500-1UU - can not see the FN on Windows 7 64 bit cards

  Hello

  Although the FN buttons work, when I bought this computer firstly I was to see a Panel and watch of the operations of the forces NOUVELLES. However, now I don't see this Panel when I push the FN key. I put t know what happen and how can I solve this problem. I uninstalled vap and installed again.

  Can someone help me?

  Hello

  try to install the utility of technical support of Flashcard [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also try to restart flashcard support in the utility folder of Toshiba (go start-Toshiba utility)

  Post edited by: Jeka-HE

• Satellite P200-P144: can't do the WPA to work on Intel 4965AGN

  Hi there, having problems become WPA to work on my laptop - P200-144. I can get a connection without WPA but I need to use WPA. I get a time-out error.

  I updated the firmware on my router 3COM and I've updated the device wireless on the laptop (intel), I use a 3com

  ROUTER:-3COM 3CRWDR100A-72
  MOBILE: Numtxpackets® Wireless Wifia? ¢ Link 4965AGN network

  These conpatable elements, or is this a configuration problem on the vista operating system

  You have the same problem if the security of your router mode is disabled, or with WEP mode?

  After you set up the router and the laptop trying to reboot the router.