Satellite P200-18Z: How can I do wake on LAN?

Similar Questions

• Satellite P200-1EE: How can I activate my Bluetooth

  How can I activate my bluetooth on I don't can't find it.
  I have BT on the bottom of my laptop and it's also on the box, but I can't find it.

  Any help would be greatly appreciated.

  Satellite P200-1EE PSPB6E-0GM028EN was not equipped with the BT module ;)
  SO you will not be able to start!

  If you want to use BT technology, then you could try t use an external USB BT stick.

  Good bye

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite P200-18Z - need to know the geometry of the disk

  I have a Satellite P200-18Z and I do an install of FreeBSD, and I need to know the geometry of the disk because my Installer crashes without obvious reason.
  In the FreeBSD installation wizard reported an error in the geometry of the disk.

  null

  Hello

  I put t know what disk HARD details you need, but as far as I know the laptop Satellite P200-18Z supports a 2.5 200 GB SATA HDD.
  _Further details are: _

  Height: 9.5 mm
  Disc rotation: 4200 RPM
  Buffer size: 8 MB
  Number of discs: 2
  Number of Heads: 4

  All that s what I found. It is perhaps useful

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Satellite A110-167: How can I get a few bass coming out?

  There is no bass coming from my Satellite! There is no bass even when I connect my A 110-167 for computer laptop to my system stereo!

  This seems to be a common problem with the series, but I have not yet found a solution.

  How can I solve this problem?

  Congratulations in advance for you help!

  Shoey

  Hello

  Try to delete the two files (RTHDAEQ0 and RTHDAEQ1)
  You can find it in the C:\Windows\System32\Drivers\ folder

  The bass should be a little better.
  But they are usually physical specifications (speaker) and if it s not enough for you there without much ;(

• Satellite P100-324: How can I enable shortcuts on the touchpad

  I have the Satellite P100-324.
  Modell Nr.: PSPA6E-02R01FGR

  I saw in the internet to a Web site that something really interested on a surface of touchpad. Here is the link http://forum.notebookreview.com/showthread.php?p=1362295
  But how to activate this feature? How can I activate my touchpad shortcuts?

  I would be really happy to help =)

  Hello

  I think you mean the function of easy capture.

  Something like that you can try to activate in the mouse settings in the control panel.
  Here, you have to choose the double pointing device.
  Then detailed-> TouchPad tab settings

  But first, we should know if your laptop supports this feature.
  Are you sure the model to support you 100%?

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• Satellite A100-912: How can I get a upgrade DVD Toshiba step by step

  I bought a Satellite A100-912 (with XP installed). Now, I'm upgrading to Vista Ultimate. I don't have the Toshiba Step By Step Upgrade DVD; so, how can I get (or buy) a copy of the DVD?

  Hello

  Usually, it must be delivered with the Toshiba Windows Vista Express Upgrade DVD.
  I put t know why you received this CD but perhaps article Toshiba we could help you.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=1693760&BV

• Satellite L40 - 18Z - how to turn on wireless?

  I have Satellite L40 - 18Z running Windows Vista Service Pack 2.

  I've had a few cases where the wireless seems to have failed. On this instance, the LED at the front does not shine despite the switch is either off or on position. I checked the network card settings and it is activated. I have disabled/enabled the adapter, but without success. I uninstalled and reinstalled the driver - with no success. I checked for the latest drivers, but they are already installed.

  I also deleted and reinstalled the adjacent wireless card to memory, there still without success. The network and sharing Center diagnosis indicates only that the without wire must pass away - but I am unable to do so.

  Any advice would be welcome. Thank you.

  Hello

  The WIFI connection can be activated in different ways: with the hardware switch you have ever tried and key combination FN + F8.
  So have you activated the wireless network card by pressing FN + F8?

  From my own experience, I can say that the WLAN led is only if you use this key combination too.
  Check this box!

  In addition, you wrote on reinstall drivers WLAN you have installed you exactly? The most recent and pre-tested WLAN drivers, you can find the Toshiba site.

  Last but not least, I also updated the BIOS, if nothing else works.

• Satellite Pro 4600: How can I get my wireless to turn on?

  EIS,

  Sorry to ask the most basic questions, but I just inherited a Toshiba Satellite Pro 4600, on the back side of the laptop, I have the following information:
  CEL 750 / 128 / 20 GB / 14T

  On the left side of the Panel, there is a wireless - switch this switch, how can I get the built in wireless to work please?

  Thank you.

  Hi mate,

  Firstly: are you sure that you have a wireless card installed? This is the first question and perhaps the most important of them. Not every Satellite 4600 has been bundled with a wireless card and a switch wireless on the left side says nothing.

  I know it s hard without technical knowledge, but what you can do is download the drivers from the Toshiba Drivers and Downloads 'Archive' wireless, turn on the wireless switch and check if some materials are recognized. If Yes, then welcome to the wireless world. :)

  Would like to hear some comments from your part Thx.

• Satellite A200-1AE: How can I configure the settings of buttons Dual Mode Pad?

  Hello

  I recently bought a Satellite A200-1AE. I tried to configure the default first button on my touch pad (lower left) so that I can fire up MSWord, but it did not work.

  Now every time I have set the mode button and press this button, that nothing not to pass - I lost practically this button.

  My question is how can I configure the mode button on the touch pad settings? Even if I was able to start a program by using the 3 buttons how can I modify these programs?

  Thanks for your help!

  p.s. I read the extended version of the manual for my laptop. There is no explanation of my problem - it says I should look "Synaptics Dual Mode Pad properties.

  I don't know where are these properties.

  Hello

  It s is not so difficult as you think, the properties of the synaptics are in the "mouse properties" of your "Control Panel" of windows. When you reach the 'mouse', then click on the "Advanced" tab and you should find a button 'Advanced functionality settings'.
  It could be that the button is not named as mine, but it must be identical.
  After clicking on it, you should look for this 'easy' Launcher in one of the tabs.

  I think that you will make it, but I'd like some feedback from you.

  Welcome them

• Satellite P300D 10V - how can I update the display driver?

  I have a Satellite P300D 10V and there ATI radeon hd 3xxx series display panel. I bought Starcraft 2 and there was an error message: that the display driver is outdated.

  I went on ati.com. They say I have to get the driver from Toshiba. I went to Toshiba, had the driver. When you try to install it says no components to install. I uninstalled the ati driver and tried again. The same thing.

  Now I don't have driver for the graphics card. How can I install the driver?

  Help, please!

  Hey,.

  This means that you have uninstalled the old display driver, but now, you are not able to install the latest version of Toshiba?
  Well, what OS do you have?

  Before installing the new display driver, you should decompress all the files. Then run the setup.exe file.
  If you get the same error message, try to install the driver through the Device Manager.

• Satellite 2800-600: How can I flash SD-R2002?

  Hi people,

  On our satellite 2800-600 (rather good old coin :-)) SD-R2002 combo drive doesn t work anymore.) Very well. We bought a "new and used" one on eBay, made in August 2001 (the build-in has been since May 2001), but when a 'new' has been installed, there was an error #1 on the start screen IDE - I read on the fact that there is something special with TU30 and TR30 and I'll have to Flash the firmware of the 'new '. Now, first of all, I need this patch: SDR-2612-TU30 - TR30_CESLChanger.exe

  And the second: How can Flash a CD that doesn't drive t work? I checked a Web site which meant: start with the old one, get off the power, put in again and windows will be Plug and play. man - it is windows me on our satellite and there is no plug-and-play at :-(- so the advice?

  Please... it s really urgent!

  Hi JSommer

  The first, to check if the drive is M/S or CSEL. In my opinion the unit doesn t support drivers with technology CSEL. But nevertheless I found the site with information on SD-R2002.

  http://www.Toshiba.de/Speichermedien/index.asp?page=pft&NAV=ISH_ARC&model=SDR2002

  Best regards

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).