Satellite P200-199 4 GB Ram upgrade

Similar Questions

• Satellite P200-199 - Win XP: does not work Fn + F5... Keys Fn + F9

  I had to install Windows XP on Satellite P200-199. After installation, Toshiba Hotkey Utility consists only of keys Fn + F3 and Fn + F4 and I can't change the brightness of the screen. How can I solve this problem? All programs and drivers XP downloaded from the website of Toshiba and installed correctly. BIOS version is the last (1.7.0). I can't work under Vista, and I choose Toshiba only for possibility of installation of XP :). If there is a way to change the brightness of the screen without hardware key (i.e. through a program or applet control), it is acceptable too.

  Thank you.

  P.S. On the Toshiba site, there is no version of Toshiba power saver utility for XP (for Satellite P200), but I try to install 7.08.05 version - there doesn't work (CANNOT be opened because you do NOT have right to "TOSHIBA Power Saver"). I have administrator rights (Administrator installation).

  Post edited by: SweN

  Hello

  Have you installed all the drivers in the correct order?
  Installation file instruction txt on the Toshiba page shows you the step by step guide line that the order of installation is necessary!

  With regard to the issue of keys FN;
  To my knowledge, the update of the BIOS is necessary. BIOS 1.7 - winner is not designed specifically for the XP operating system and therefore, it may happen that after the installation of the operating system XP, some functions don't work properly!
  Unfortunately, I didn't find another version of BIOS for the P200-199 PSPB0E series.

  See user's last message * vjkostas *.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24798&TSTART=0

  Concerning the issue of energy saving;
  The bomber screensaver utility and the Poser saver driver are available on page. I think first of all the pilot, and after restarting again the standby electricity utility must be installed.
  But take a look at the installation instructions.

  concerning

• Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

  Hello guys,.

  I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

  It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

  The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

  Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

  Any advice would be much appreciated.

  Kind regards

  It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

  Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
  I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

  As compatible modules, you can use
  TOSHIBA
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

  Kingston
  KTT533D2 / 2G 2GB 533 MHz Module
  KTT667D2 / 2G 2GB 667 MHz Module

  On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Bye and good luck.

• Satellite P200 - option SATA missing after upgrading the BIOS

  Hey guys!
  First sorry for my englich
  So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
  so please what can I do to switch to ahci or ide mode, can I downgrade the bios version

  So thank you we

  Hello

  Must add driver SATA while installing Windows.
  During the installation process you will be asked to add the driver (F6 key)
  Then you could add the connected USB floppy disk driver.

  More details how to do here:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

  or here

  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• Recovery for Satellite P200-199 (PSPB0E-03P00JG3) CD

  Hello everyone,
  I have a Toshiba P200-199 (PSPB0E-03P00JG3) with the serial number: 97143051K.
  Unfortunately, I lost the recovery disc. How can I start all over with a fresh windows?

  Thank you very much for your help.

  > How can I start all over with a fresh windows?
  I put t know what do you mean with fresh windows but if you want to have the factory again settings you must install recovery image original Toshiba designed for your laptop model.
  What you can do is to check if you can order it on https://backupmedia.toshiba.eu/landing.aspx

  If this isn't the case, you can install own OS. All the necessary drivers, tools and utilities for all operating systems supported, you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Satellite P200-199: Chicony Camera assistant software does not

  OK, that makes me crazy. I read all the papers that came with my new computer. I have been using / computers in construction since 1994. The camera on the P200-199 does not work, the drivers are not recognized on my vista operating system. I tried other select USB driver it, didn't work. Research on the cd of restoration for more than an hour - was not found.

  I've not seen anything listed at pages 4-8-4-9. There is NO Camera Assistant Software"located 5 research for it on my computer. Tried yahoo, aol, msn all who have web applications cam - none of those who built it in camera.

  Yes, with this in mind, where I can d/l the software for this camera to work?

  Hello Dave

  Before starting any discussion please can you follow me thing: has your laptop or you factory settings installed your own OS?

  By the way: I'm really confused you with as much experience PC don't know what is the recovery image?

• Satellite L10-119 freezes after RAM upgrade

  My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
  I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

  But next time, he started to make mistakes and freeze or stop going to the blue screen.
  When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

  Will not track with * 1 Gb PC - 3200 * to use?

  Hello

  Case is clear!
  > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
  You used the not entirely compatible RAM modules!
  This is the reason why your laptop freezes!

  The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

  In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

• Satellite C660 PSC1JE - 8 GB RAM upgrade problems

  Fellow owners of Toshiba,

  I have a Satellite C660-PSC1JE-00Y00XHU with 3 GB RAM (1 + 2) I want to go to 8 GB.

  I went out and bought 2 x 4 GB, but so far no of the below those worked (the computer restarts or stop):
  http://www.Amazon.com/Kingston-Technology-1333MHz-KTT-S3BS-4G/DP/B00B2UWSD4
  http://www.Kingston.com/dataSheets/KVR16S11S8_4.PDF
  I was not to mix memories above, purchased two of each. Certainly, these operate at higher MHz and they aren't memories KIT, so that may be the issue.

  According to the specifications of the laptop (SEE attachment), I should be able to move to 8 GB.
  I found the following thread here, but it is not help me solve this problem: https://forum.toshiba.eu/showthread...RAM+memory+8gb

  I found my memories at Intel:
  http://www.Intel.com/content/www/us/en/platform-memory/DDR3-1333-n-ECC-SODIMM-validation-results.html?wapkw=m471b2873fhs
  Two of my memories have a value of 'B' in the R/C column, but what that means? I ask, it is because in the list, there are two 4 GB memory listed thus:
  M471B5273CH0-CH9
  M471B5273BH1-CH9
  But these memories have a 'F' in R/C column. Is that mean that they didn't work with the tested chipset?

  I found a KIT on amazon, where PSC1JE is registered: http://amzn.com/B00WAFGDTK
  But on the important information of the product section, only C655 notebooks are listed.

  Another thing I noticed, is that support for DDR3 frequency on my motherboard is only 533 MHz, but the memories that came with the laptop are 666,7 MHz. Does that mean I shouldn't buy same PC3-10600 memory, since it would not even capable of running at full speed?

  What I absolutely have to buy KIT or can I go out with two sticks of Samsung 4 GB?

  I am at a loss. Can someone point me in the direction of someone who can check what memory modules I need in order to have 8 GB in my notebook?

  Thank you
  David

  Hello

  I'm looking to upgrade my 8 GB RAM. I bought 2 x 4 GB of RAM, but I get a blue screen on startup, so I went back to them. Currently looking for something that works. Did you find something that works well with your laptop?

• Satellite S3000-214: HD and RAM upgrade

  I want to upgrade a Satellite S3000-214 with a new hard drive and RAM.
  Anyone know how I can upgrade the HD? It is currently only 20 GB.
  About the RAM, I tried to upgrade before but abandoned after Misco sent me upgrades wrong a few times. Does anyone know a supplier who could have a sales team could sell me the good memory?

  Any help would be appreciated.

  It is possible to upgrade the HDD up to 30 GB.
  The BIOS should recognize this format without any problem. You can use a simple 2.5 bus master IDE HDD.

  It is also possible a memory upgrade for max 1024 MB

• Satellite A215-S7422 - question about RAM upgrade

  I have a Satellite A215-S7422 series. I want to spend my RAM from 1 to 4 GB because it s expandable to 4 GB. Now, I'm not 100% computer sauvy, but I know well. I read on some people, upgrade to 4 GB and THE reading system BIOS only 3GB or the system does not start or performance becomes really slow, then faster due to the amount of RAM. In all the words, I wonder - is it ok for me to upgrade my series being expandable to 4 GB. I was going to buy 2 x 2 GB RAM sticks of Kingston. There is the link, is this correct? Here are the specs of the system:

  The AMD processor brand
  AMD CPU and memory processor brand
  Technology class processor Turion 64 X 2 mobile
  1.9 GHz processor speed
  1 GB installed memory
  Memory 4 GB maximum
  Memory DDR II SDRAM technology
  Cache size 1 MB

  Storage Hard Drive capacity 160 GB
  Included disks DVD ± RW (±R DL) / DVD-RAM
  Write speed 24 X CD
  CD 10 X rewrite speed
  Read speed 24 X CD
  8 X DVD read speed
  Write speed of DVD 8 x (DVD±R), 4 x (DVD±R DL)

  Display and graphic display size 15.4 in
  Display Type TFT active matrix
  ATI Radeon X 1200 graphics card processor
  Resolution 1280 x 800 pixels

  Hello

  If a computer has 4 GB of RAM installed module, the user can use 3.0 3.3 GB only. It is the restriction of the CPU of the 32-bit mode.
  Please visit http://support.microsoft.com/kb/929605/en-us

  If please do not worry and upgrade RAM on your machine.

• Satellite L30-10 x and RAM upgrade

  Hello

  IM missing to know where and how to upgrade RAM in Satellite L30 - 10 x. I would like to switch to 2 GB (maximum) and also upgrade to vista Home premium.
  Can anyone help?

  Thank you

  Hello

  To upgrade of RAM on this laptop model is very simple. Memory locations are under the memory cover. Remove cover memory placed in the lower corner of your laptop (in the middle) and you will have access to these two RAM slots.

  If you want to use max RAM I recommend to buy compatible DDR2 400/533 1 GB module with the PA3411U-1M1G part number.
  Vista upgrade should be no problem at all. On the Toshiba support page under http://eu.computers.toshiba-europe.com > download & support, you can find the Vista drivers, tools and utilities for your Satellite L30 (PSL33E).

  Good luck!

• Satellite M40x-149 - Question about RAM upgrade

  Currently, I have 512 MB of RAM and want to upgrade. The jury of the RAM has two screws, should I take this and replace it with an upgrade of RAM, or leave the original in and put the new in the slot on top?

  Thank you.

  Hi RareOz,

  The amount of RAM you want after upgrade?
  If you want a maximum of 1 GB of RAM for example, you can leave the original RAM in and buy 512 MB additional RAM.

  But as far as I know M40x supports up to 2 GB of RAM, and that's why it would be necessary to install the module of RAM of 1 GB in each slot. That's why you need two new modules.

  The specification is PC2700 SO - DIMM DDR - RAM.

• Satellite Pro A100: Question about RAM upgrade and warranty

  I just bought my machine and Ive decided to install some more ram. No one knows if it will affect my Gurentee. I can't find anything on the Web site on this topic. Should I get a Toshiba to install official repairman or something?
  Thank you

  Hello

  Please check you user manual. Usually, the slot memory must be placed at the bottom of the unit. If you remove the cover, you should see the slots.
  Usually memory upgrade procedure is described in the user manual so you can upgrade the memory yourself and the procedure of upgrading doesn t affect your warranty.
  But please make sure you use the right modules.
  However, you can also contact Toshiba for the upgrade of memory.

• Satellite M115-S3094 freezes after RAM upgrade

  Hello

  I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

  Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

  If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
  This all started when I upgrded memory. I tried to re install and it did not help.

  I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

  On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

  Hello

  I think that the problem is without a doubt for new modules of memory installed
  Maybe the modules aren't 100% compatible or failed modules

  I guess the laptop ran correctly with the old module of RAM.
  This would confirm my hypothesis and I think you should test the specifications with the other s RAM

  Good bye

• Satellite A100-487 - 4 GB RAM upgrade Possible?

  I'm looking to upgrade the bundled 1 GB 533 MHz to 4 GB 667 MHz - possible? The specification page does not approve the operating manual (4 GB on spec, 2 x 1 GB in the manual).

  I have a feeling that it's ok, but since I'm this seizing of the United States and I'm in England I would like to know before I go into a nightmare of returns.

  See you soon

  HI Scott,.

  As far as I can make out A100-487 accepts up to 4 GB of RAM (2 X 2 GB cards). Please visit the following link: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26212&ft=m&St=3

  Kind regards