Satellite P200-1AE (PSPBOE) - error Winpeshl.exe if I start the laptop

When try to start in safe mode or repair (F8), I get a window named winpeshl.exe and black screen.

Help, please?

Hello

Winpeshl.exe file seems to have something to do with the Windows PE (protected environment).

Here is an information on Windows PE (protected environment).
http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

Windows preinstallation environment (Windows PE) 2.0 is a minimal operating system Win32 with limited services, built on the Windows Vista kernel. It is used to prepare a computer for Windows installation, to copy images from a network file server disk and start the installation of Windows.
In my opinion, you should try to restart the operating system in safe mode.
After that the laptop has been turned on, press F8 and choose some options.

In the worst case, you might choose the first option called repair my computer and could start the Toshiba HDD recovery that would reinstall the whole OS.
But this would format the HARD drive and you will lose all files stored on the HARD drive.

Tags: Toshiba

Similar Questions

  • Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

    Original title: problem installing scanner

    EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

    Hey there, MAHIPALSINGH143

    Welcome to the Microsoft community forums.

    So that the community help to install your printer, we will need more information. Please answer these questions:

    1. Windows what operating system are you running (Windows 10, 8.1, 7)?
    2. The troubleshooting steps have so you far?
    3. Did you upgrade to a new operating system?
      1. If Yes, what operating system you were on before?

    When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

    Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

    When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

    Kind regards

  • try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

    error message
    Windows could not start the Bonjour service on local computer
    Error 5 access is denied

    I have Vista Home.

    This prevents me to update I have tunes.

    Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

  • Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

    original title: Error Code 0 x 80070424 on the Windows Firewall settings

    I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

    Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

    Hello

    Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

    This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

    Download the two files from the registry

    http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

    The base filtering engine

    http://download.bleepingcomputer.com/win-services/7/BFE.reg

    Run them and click YES when you receive a UAC prompt

    Restart your PC

    Press Windows key + R and type

    regedit , and then click ok

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

    Right click on it -permissions

    Click ADD and type

    Everyone, and then click ok

    Now click on all

    Below, you have the permission for users

    Select full control, and then click ok

    Press Windows key + R and type

    services.msc , and then click ok

    Start the service database and then filtering engine service windows firewall

    If you still get this error

    Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

    Download and launch this key

    Shared access

    Click YES when you receive a UAC prompt

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

    Right-click on -permissions

    Click Add and type

    Select full control and everyone

    You should be able to start right now the firewall

    You can also Miss defender of windows security center, BITS and windows update services

    Download

    Security Center service

    http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

    Windows Defender

    http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

    BITS

    http://download.bleepingcomputer.com/win-services/7/bits.reg

    Windows Update

    http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

    Run them and click YES when you receive a quick restart, UAC the PC


    Good luck

    * Edit *.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...
  • Is there a software that can alert when any type of. EXE or. Starts the program of bat?

    Original title: WINDOWS help

    Is it a software, that can notify me when any type of. EXE or. Starts the program of BAT.  And I can block or allow the it. Who can be a system or another program.

    Please someone help me. For windows 7

    Hi, Adje,

    You can try to turn on the UAC (User Account Control). It warns you when a program starts.

    For more information, see the articles:

    How can I change the behavior of user account control by using the slider?

    What are user account control settings?

    Enable or disable the User Account Control

    Hope the helps of information.

  • Cannot retrieve the Satellite P200-123 - IMAGEX error message

    Hello

    I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
    IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

    IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

    Hello Erin

    It is not easy to say why this happens because this error message occurs for different issues.
    One thing can be the reason for this.

    If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
    I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
    What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
    Maybe you try to do this. I do not know.

    Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
    Test if you please and let me know exactly what is happening.

  • Satellite L300D - recovery BSOD error + imagex.exe application error

    Hello

    My laptop lost function a while back due to some unknown errors. I managed to get most of the data on safe mode and transferred them on my desk.

    The problem I have now is to fix my laptop. I have since lost my receipt and so unable to guarantee; but I thought that I could restore my computer to its factory condition with the recovery disk that I created. The original problem and I'm facing can be seen here-> http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153146#153146<>

    As you can see on this thread, the recovery disk has failed. So, based on the advice I have received, I went to a computer retailer Toshiba Repair Center today and they replaced my hard drive with a SATA 120 GB Fujitsu. Then, I tried to use the recovery disk but ran into a few snags. (1) a BSOD happens randomly during the restoration, i.e. during the copy image it would pop up... sometimes he'd jump upward when it is finalizing the recovery. (2) sometimes, the BSOD will be bipassed, and instead, a mistake would come to 3% installation finalising saying that img could not be copied to the HARD disk in C /:! (3) sometimes a misapplication of image.exe would come saying 'the instruction at 0x77c45a20 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the program. »

    NOTE: None of these problems occur in the same resumption of the trial. But they made it up randomly and when they do, I have to restart the computer and try again.

    My question is this. Since the last piece of advice was to replace my faulty HARD drive, and I did, why I am still unable to fix my computer? And if it is not one of the HARD drive, then what is the problem here? I'm desperate to fix my laptop as it is meant to be my 14 year old office replacement. Thank you all for your kind attention; I only hope that there is someone out there who has faced and overcome such a problem before.

    Hello!

    It's not easy to say what the reason is for this. It might be the motherboard, HARD disk or a faulty RAM again. So it could be bad luck that the new HARD drive is also down

    I think you should test something on your laptop with special diagnostics tools.

    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
    On the same site is a user's guide if you want to know more.

    http://Memtest86.com/
    Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
    It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

    After that, post your result. Maybe the test is a mistake.
    If this isn't the case, you should try it with a Microsoft installation disc. Maybe the recovery disk is noisy or so

    You can t find something you should go to the ASP again. Talk to the technicians and explain the situation. I think they'll try to help you as quickly as possible.

    Good bye

  • Satellite P200-1 has 2 dead after trying to update the Bios

    Hello

    I downloaded the latest version of the BIOS firmware of Toshibas site (European site). I checked it clearly with the model nr and serial nr. I went on the northern site to update bios and downloaded the latest drivers and BIOS.

    My laptop Satellite P200-1 has 2 and the nr series is PSPB6E-02J023N5. Toshibas site, I downloaded all the drivers needed and bios. I started with the installation of the BIOS, when I tried to install it, then my pc froze.

    My food was on.
    The fan went beserk everything and the screen froze.
    I tried to let it run for 30 minutes, because I was afraid to interrupt the installation. I couldn't wait anymore, so I turned off the pc by removing the battery and power.

    When I then tried to turn on the laptop, nothing happens. All black screen.

    Can anyone help? I used the correct BIOS driver of Toshiba's own home page, but apparently it didn't work. How do I restore the BIOS? I don't know what BIOS I use.

    What I've done so far is:

    1. use HP USB Disk Storage Format Tool with MiniDOS files to make your Flash Bootable drive: USB
    2 copy all the files from backup for your: USB key
    3 rename your BIOS to bios.wph file and copy it in your: USB stick. I downloaded the same BIOS firmware and downloaded as EXE file, I extracted the exe file and found a file called. ROM and I renamed the entire file in bios.wph
    4. remove the battery, unplug the computer from power.
    5. hold: Fn + B, then all in now the computer in power (do not connect the battery) and close the power button.

    But after that, nothing happens.

    I'm afraid that something was wrong during the update of the BIOS of m.
    It seems that your ROM module, where are stored the BIOS was not flashed properly.

    I guess you checked this thread because the procedure described is her even that you posted your message.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

    However, maybe you should try the procedure using the floppy and disk crisis described in the other thread.

    If this is not enough, your final option is the Toshiba service partner.

  • Satellite P200 Vista Ultimate - Extended desktop does not remain on the left

    I can EXTEND my desktop to a second LCD on my Satellite P200 without problems - UNTIL I place it on the LEFT.

    It will not retain this position (I need to reposition after every restart - this I can live with that).

    But I use a KMV switch intensively, whenever I come back to the Satellite, the extended desktop is back on the right.

    Someone at - it ideas?

    Post edited by: HammondKF

    Hello

    I think it s a display driver problem.
    Try to update the graphics driver to the latest version.
    If you will be late nothing on the European driver Toshiba page try to search on the site of Toshiba Canada and 3 websites of third parties such as www.omegadrivers.net or www.laptopvideo2go.com

    If you will not find the latest drivers try this temporary fix.
    Don t let the Windows Vista TMM to manage your multiple monitors.
    Go to Task Scheduler, in the list of active tasks, find the line task TMM, turn it off - off on logon trigger (or delete - save/export task before you do), and then restart your windows. I hope it will work ;)

  • Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

    Original title:

    Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

    Hello
    1. what version of Windows is installed on the computer?
    2. are you aware of any changes made to the computer, before the show?
    Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

    Method 1:

    Step 1: Perform a boot minimum troubleshooting and check which application reports this error
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Step 2: reinstall the application.
    Uninstall or change a program
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Method 2:
    Run an analysis of auditor of system files on your computer and check for the issue.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    I hope this helps.

  • Satellite P200 - reading CD or DVD without having to start

    Hello

    Is anyway to play CD or DVD without having to start up on the P200-144

    Thank you
    Machanic

    Hello

    If the laptop comes with preinstalled Express media player that you can do. You have Express collection CD Player media with your laptop?

  • Reviews for .dll file loading error when starting the laptop

    After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

    This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

    Here are the detailed instructions that protect you and solve your problem in the 'right' way.

    If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
    .  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Satellite L650-12 q keeps freezing whenever I have start the video or the phone call

    Hello

    I recently bought a portable Satellite L650-12 q who played perfectly until I tried a video MSN Chat (MSN messenger and Skype). Within seconds of starting the conversation, the computer crashes completely. I get a static screen and nothing works just so than ever and all I can do is press the button works / stop.

    I'd appreciate it really any advice on why this is happening and how can I fix this please?

    Camera assistance software running in the background all the time (starting with Windows)?
    Try disabling it in the start menu > run > msconfig > startup and check again.

    To be honest I have never heard of this issue and especially there is no problem with Skype.

    By the way: have you checked the Skype video settings? There is everything OK?

  • Re: Satellite L10-90 - time settings are wrong if I start the next computer

    Hi, I have Satellite L10-90 with XP Home. The time setting is always bad for about a month. I synced the time and it seems to be fixed. But if I start the computer the next day, the time is wrong again. I found some information in Google. Some people say that the battery on board already is discharged and must be re-read by a new one.

    I don't know what could be the reason. If I need a new battery, where it is on this computer, and how to change?

    Help will be appreciated.

    Hello

    Normally if you leave the AC adapter plugged the CMOS battery will be charged. If the AC/DC adapter is connected during the night?

    If you have enabled the internet time synchronization time must always bet right.
    Check it!

    As Akuma said if the laptop is connected to a server, it is possible that the time on the server will not

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.
    whatever it is sent to the printer never finished loading and crashes to the top
    my computer, so I have to re - start.

    This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your questions to http://answers.microsoft.com/en-us/windows/forum/hardware, making sure that you specify your Windows version in the drop-down lists at the top.

Maybe you are looking for

  • HP Pavilion dv6 1359wm

    Hello I just reformat my laptop and the wireless network adapter driver is missing (Controller of network and 2 other unknown devices). Unfortunately, I do not know what the driver is so any help would be appreciated. The laptop is a HP Pavilion dv6

  • Windows backup did not complete successfully.

    My backups attempts continue to fail with "Windows backup has not completely managed" and when I click on the 'Options' button, it gives me the details of why and wrote "the disk where your backups are saved doesn't have enough free space. That is TO

  • Space personalized to ButtonFields:

    I am new bie, want to provide space for two buttons. For ex: I have two buttons such as A and b. I code in such a way that 'FieldListener' and add (xxx)' done this thing. If I want to provide a space between the button A and B, how to do? Perhaps, A

  • Smartphones blackBerry WiFi email no data Plan

    Hello I'm new here, so thanks for any help. Large community. I read already a few posts, but impossible to find a solution. I want to check my emails gmail through my Bold 9700. Currently, I don't want to sign up for a data plan. I want to use my Wif

  • "The document could not be saved. There was a problem reading this document (110) "HELP!"

    I spent hours of work on my PDF, it is 13.5 MB. This is a manual I highlighted and studied and can not save. I get the above error. Help, please! If I save because it does not work.