Satellite P200-1EE does not properly of the HD-DVD play

Hello

My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
So, I tried the setting on my DVD player program but made no difference at all

I think HD-DVD player is broken.
Can someone help?

Hello

I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
Am I wrong?

So first of all, you should try to update your HD Toshiba DVD player software.
Then, check if the HD-DVD player firmware update is possible.

The two parties, you should find on the European driver Toshiba page!

I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

Good luck & best regards

Tags: Toshiba

Similar Questions

  • Satellite P200-1EE does not read HD DVD drive TS-L802A HD

    I bought a P200-1EE of PC World and have found since that she has huge problems for reading HD DVDs via HD Toshiba DVD player software.

    I bought the last movie of Harry Potter of Warner Brothers to test the drive. Player software launches (after recognizing the media) once I inserted the disc to hd, but it crashes then once he eventually tries to read the disc. I know that the drive is ok because it worked without any problem on the Xbox HD dvd player, and on about 60 attempts, he played twice!

    The guys from PC World pulled a 1EE another P200 of their warehouse and after it is autoconfig he had the same problems, that is to say he ran the player then locked with a black screen (no error) and we finish the task the software does not respond.

    I'm a little frustrated and can not find the Board of anywhere. I have updated the bios of laptop computers, but can not find updates the firmware for Player software or drive. The driver doesn'tseem to have updates or the other (version 6.0.6000.16386)

    I have an exceptional appeal with Tosh but I hope someone else can have solved something similar.

    I am also looking for support playing movies through the HDMI cable, if I can get the laptop working.

    Thanks for your time my dear SIRS.

    Hello

    You use the Toshiba HD DVD player?
    If yes-> trying to update from Toshiba's HD DVD player with the update published on the Qosmio G30.
    There is an update of this utility, and the original version must be installed to perform this update!

    But please don t forget a fact; HD DVD technology is very recent, and not all movies have been designed with the same level.
    Sometimes may occur that the player will manage all HD DVD.

    Of course, you could try to test other HD DVD movies to ensure that equipment (HD-DVD player) is not defective

  • Satellite P200-1EE does not play a HD - DVD

    My P200 with HD DVD drive fails to recognize a HD drive (before ask you, this is not a Blu - Ray). It's a UK bought HD DVD. When I start the program of DVD HD Toshiba drive and insert a disc, nothing happens. He will play a standard DVD with no problems. All other functions of the disk drive appear to be good.

    What is the solution to this problem? I made no change of setting.

    The problem is that your HD DVD player firmware is not updated!
    In addition, I would recommend the Toshiba HD DVD Player update!

    See European Toshiba driver page, select your notebook series and date the firmware of the HD DVD player and readers!

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Why the Satellite L650-116 does not appear on the list of products?

    Why my notebook l650-116 does not appear on the list of products?
    It does not appear even with the auto detects the program located on the site.

    Hello

    I put t know what you mean?
    SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
    You can find the details on the Toshiba Cyprus page
    http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

    In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

    Welcome them

  • Satellite L40 - 14N does not connect to the WLan router

    Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
    Is the error that says "error message unknown" try please login again.

    The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

    Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

    Seems to be a Vista issue.

    I found this article Ms knowledge base:
    http://support.Microsoft.com/kb/928233/en-us

    You need to add a value in the Windows registry.

    1. Click Start, type regedit in the search box, and then click regedit
    list programs.

    2. Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
    This registry path, click the (GUID) subkey that corresponds to the
    Network adapter that is connected to the network.

    3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

    4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
    Press ENTER.

    5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

    6. in the value data box, type 1 and then click OK.

    7. close the registry editor.

    concerning

  • XML with a member does not properly in the data model

    I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

    QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
    

    I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

    This problem is closely related to this question, where a solution QML is given.

    Hi Mitch99,

    Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

  • 4.0 ai2 - automatic adjustment does not properly in the result of the query grid

    Hello

    in 4.0 ai2 automatic adjustment does not work in the result of the query grid.

    Rather than shrink the columns to the narrower size taking into account topics and content (see 3.2), it auto ' enlarged to fit the entire grid of data query.

    She looks worse and makes it harder to see results at a glance.

    Bug and will be fixed for the release of v4.

  • Web on Satellite P200 camera does not work properly

    Dear Sir.

    I have Toshiba Satellite P200-144 and I have problem with my web cam.

    Although the software works properly, the error code "Please turn on the camera.
    I removed and downloaded the program, but could not able to the camera. Can you help me to do so.

    Kind regards

    Omer

    I also have this problem. You can temporarily cure by going to Device Manager and update the driver for the webcam (perhaps automatically, I always choose manual and then choose video Chicony USB 2.0 or USB webcam device). Don't forget to restart.

    I say temporarily because I find that after another reboot, the camera will stop working again. I would like to know if you have this problem too.

  • WLan / WiFi works does not properly on the Satellite C55C-C-16f

    Hello

    I just bought the laptop toshiba Toshiba Satellite C55C-C-16f mentioned in the title, and there seems to be something wrong with the WiFi adapter.

    Sometimes it connects to the WiFi, but most often, when I start the computer (whether by or stand when it is off), it finds no network and cannot connect to my WiFi router. Usually, when I restart the computer all of a sudden does ot connects to the network. I tried the filming of standard Windows problems, but it can not find problems or repair.

    I hope you can help!

    Best regards

    I just have the same problem with my new ray. If I have more than 2 m from the router, the reception is 1 bar. Most often the laptop can't find any network.
    I tried to put maximum performance in energy saving mode, but it doesn't change anything...

  • Drive DVD - RW does not properly on the Satellite A40-702

    It's on my lap top of Toshiba Satellite SA-40-702. Five years ago.
    Hi, I have looked at the wires for this problem and have not been able to identify a similar thread yet.

    My dvd - rw play a purchased audio music cd and it will also work with disks that came with the laptop. S something works well... However, recently I tried to burn a piece of music (from i-tunes) and he showed in white, but strangeley the cd did play the piece of music OK in a machine at work. I tried now to show some other discs that I recorded on this laptop in January, and they now show that the discs and I cannot see their content (they were photos and text documents). They worked before.

    I have this weekend made many attempts of 30 photos of burn, and I tried two different brands of dvd discs blank, but even if the laptop says 'burning to disc' etc when I try to view the burned disc, there is nothing on it!

    I wonder if anyone has any suggestions please. I tried to clean the blue eye with a brush hairs inside the drawer of the dvd, that's why I expect that the next step may be just to buy a few more recent records?

    G

    Hello

    My personal opinion is; the reader cannot process the community burned due to the stressed out laser lens. It turns out that your laptop and the drive is older than 5 years.
    I put t know how the drive has been used in recent years, but due to the long period of possible use of s that the lens cannot read data from the CD/DVD now.

    This is not unusual. My brother s book can not read the CD/DVD that were burned a year ago, I presume that it of the same reason the s drive laser lens problem

    Hmm you don t have many possibilities, you can try to burn these discs with another computer/laptop and then could check if you red the data.
    The last option would replace the drive

  • Satellite U200 - sound does not work after the installation of Win8.1

    Hello guys,.

    I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

    An advise please.

    Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

    If the sound card is properly installed, have you checked all the sound settings?
    I presume that the same problem is with a headset, right?

  • Satellite P200: Screensaver does not start on Vista Home Premium

    Hi people!

    I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

    ChrisB

    Hello

    Can I ask you if you use the Microsoft wireless mouse?
    I discovered that this may affect the functionality of the screensaver on Vista OS.

    Strange!

    Then maybe you should check out this MS article:

    + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
    http://support.Microsoft.com/kb/911895

    Feedback would be appreciated.

  • Satellite P205: Touchpad does not work when the new adapter is connected

    I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:

    -Does not load properly and turns off after an hour.
    -The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
    -Charger Word to say the laptop plugged in but not charging

    What can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?

    See you soon!

    Hello

    I guess that the touchpad worked correctly in the past with the former sector adapter.
    Is this good?

    Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.

    Check the AC adapter s old part number and if the issues could be resolved using this adapter.

  • Satellite A200 - Vista does not and only the mouse works

    I have problem with Windows Vista SP1 on A200 (PSAE6E).

    After the recovery of the DVD attached to computer system Vista laptop and running other programs sometimes not respond. Hard drive also stop working. One job of the mouse and the cursor moves on the screen, nothing else. ALT + CTRL + delete not work too only solution is hard power off by pressing and hold the switch.

    Before recovering the system everything works fine. I noticed this Vista product key does not match that of the sticker. I have not changed key and no one else do not have access to my laptop, hard drive that is encrypted by TruceCryp.
    There is no viruses or Trojans in the system (verified by Avira free antivirus and HijackThis), all updates are installed, only one material error with I noticed his first bad block on the hard disk.

    Hello!

    Have you tried an external keyboard on the laptop? Maybe the internal keyboard is not working properly and so you can not use CTRL + ALT + DELETE.
    The laptop is not completely freeze because you can move the cursor.
    In addition, what programs have you installed on your laptop? Maybe these software applications cause this problem.

    Furthermore, you reinstall Vista using the Toshiba Recovery disk or the disk of Microsoft? Because you have questions about the product key on the underside of the laptop and this key belongs to the preinstalled version of Vista. It's an OEM key and you can't use it with a disc of Microsoft.

    > only material error with I noticed his first bad block on the hard disk.
    I think you should swap the HARD drive as soon as possible. Back up your data immediately.
    And this is perhaps the reason for the problem... Who knows?  :|

    Good bye

Maybe you are looking for

  • RX 100 Macro

    1. how to access quickly the Macro mode?2. the auto focus is not available in Macro mode? The manual focus mode is a little confusing to use/then compose.3. can I assign my Macro mode settings for quick access to the Macro and then return quickly to

  • How to wire a pressure transducer loop 2 wires for the NI 9949 RJ - 50

    I am new to the NC and data record. I want to connect a 4/20mA, pressure sensor loop 2 son of a Terminal screw OR 9949 RJ - 50... that will then connect to an entrance NI 9237 module. The NI 9237 module is installed in a chassis OR compact 9174 DAQ.

  • HP Deskjet 2540: Printer tasks

    DeskJet 2540 - Smear printing problems. I pulled a 'feed' management printer paper jam - the only direction I could grab the book. Since then, no matter what text I print a major blunder and "inking". I ran the clean printer clean several times ink s

  • Photosmart printer 7520

    Bought the printer 7520 week last as a replacement for our Photosmart Premium C310. When we go to print anything, the list of options is so small, I wonder if there is an error in the installation of the software. We used to be able to select from ab

  • IPS 4200 Series

    Hello dear, I installed charges IPS 4200 mode pair interface Inline, Uptill now I m not getting any what package falls or complains from users. What else to do to configure IP addresses as a professional configuration for the corporate network. Thank