Satellite P200-1EE does not read HD DVD drive TS-L802A HD

I bought a P200-1EE of PC World and have found since that she has huge problems for reading HD DVDs via HD Toshiba DVD player software.

I bought the last movie of Harry Potter of Warner Brothers to test the drive. Player software launches (after recognizing the media) once I inserted the disc to hd, but it crashes then once he eventually tries to read the disc. I know that the drive is ok because it worked without any problem on the Xbox HD dvd player, and on about 60 attempts, he played twice!

The guys from PC World pulled a 1EE another P200 of their warehouse and after it is autoconfig he had the same problems, that is to say he ran the player then locked with a black screen (no error) and we finish the task the software does not respond.

I'm a little frustrated and can not find the Board of anywhere. I have updated the bios of laptop computers, but can not find updates the firmware for Player software or drive. The driver doesn'tseem to have updates or the other (version 6.0.6000.16386)

I have an exceptional appeal with Tosh but I hope someone else can have solved something similar.

I am also looking for support playing movies through the HDMI cable, if I can get the laptop working.

Thanks for your time my dear SIRS.

Advertisement

Hello

You use the Toshiba HD DVD player?
If yes-> trying to update from Toshiba's HD DVD player with the update published on the Qosmio G30.
There is an update of this utility, and the original version must be installed to perform this update!

But please don t forget a fact; HD DVD technology is very recent, and not all movies have been designed with the same level.
Sometimes may occur that the player will manage all HD DVD.

Of course, you could try to test other HD DVD movies to ensure that equipment (HD-DVD player) is not defective

Tags: Toshiba

Similar Questions

  • Satellite P200-1EE does not properly of the HD-DVD play

    Hello

    My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
    So, I tried the setting on my DVD player program but made no difference at all

    I think HD-DVD player is broken.
    Can someone help?

    Hello

    I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
    Am I wrong?

    So first of all, you should try to update your HD Toshiba DVD player software.
    Then, check if the HD-DVD player firmware update is possible.

    The two parties, you should find on the European driver Toshiba page!

    I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

    Good luck & best regards

  • Windows does not read cd/dvd drive that were

    computer in windows vista does not read the cd/dvd as a reader is on th computer.

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps and happy holidays!

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite P200-1EE does not play a HD - DVD

    My P200 with HD DVD drive fails to recognize a HD drive (before ask you, this is not a Blu - Ray). It's a UK bought HD DVD. When I start the program of DVD HD Toshiba drive and insert a disc, nothing happens. He will play a standard DVD with no problems. All other functions of the disk drive appear to be good.

    What is the solution to this problem? I made no change of setting.

    The problem is that your HD DVD player firmware is not updated!
    In addition, I would recommend the Toshiba HD DVD Player update!

    See European Toshiba driver page, select your notebook series and date the firmware of the HD DVD player and readers!

  • Satellite A300-1ME does not read that DVD only reads CD - R

    HY,

    My Satellite A300 - 1st Don t read CD - R and CD - RW worse or unburned, it only read´s DVD´s.
    Please can you give me a helping hand for this problem.

    Thank you

    Hello

    First of all, you should check if are some registry issues.
    Go to the register a remove the Upperfilters and Lowerfilters completely from the following registry key values:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then restart the device and check if you could read the CD.

    I had a lot of problems with different discs (CDs and DVDs) as well
    I could solve the problem. the problem is that my CD/DVD drive is not compatible with some CD and DVD from different manufacturers

    Finally, I bought some TDK CD - R and my CD/DVD player has been able to manage these disks
    I think you should check the different discs from different manufacturers too!

    Last but not least check if there is an update of the firmware of CD/DVD for you, CD/DVD player.
    To do this, you should visit checking page European driver Toshiba details more details.
    You will find the info if the firmware has been published for you CD/DVD drive.

    Welcome them

  • Satellite Pro M70 does not read the DVD of some manufacturers

    Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
    When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

    Any ideas?

    WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

  • Satellite P200-143 does not start

    My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

    I tried to take out the battery for the afternoon, but no effect

    Any suggestions?

    P

    It looks like a dead last.
    The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

    Good luck

  • Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

    CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

    HTH,

    JW

  • My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

    My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

    Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

    Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

    J W Stuart: http://www.pagestart.com

  • My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

    My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

    Hello

    I see nothing unusual, except that there should be a "0001", or even "0002"...

    When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

    Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

  • Windows does not recognize the DVD drive at startup

    Laptop: Dell E6410 ATG wt / verzion A15 Bios

    OS: Windows 7 SP1 with the latest updates.

    The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

    This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

    Thanks in advance for any help.

    I guess that this must be a hardware problem then.

    Seems odd.

    The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

  • SD-2212 drive does not read some DVD - Satellite 1410

    Hello every1,
    I have the Satellite 1410 604 for more than 2 years, with player combo mentioned above...
    It serves me right, except that it does not read certain types of dvd media, and I use only high quality DVD Verbatim...
    It happens that in the last months. It is not my main computer but it's to use in my house, and it really bothers me when my sister or father takes the new A60 Pro satellite on the road (its battery is better), I can't use last discs on it. So if there is a cause of upgrade, firmware I can't find on this site...

    Thanks in advance...

    Hello

    I don t think that the firmware update will solve this problem because this pilot acknowledged this DVD some time ago.
    In addition, I put t found any firmware of this drive on the Toshiba site.

    But check if the disk by removing the procedure will solve this problem. So why go to Device Manager and remove the disc. After again starting the operating system should recognize the drive again

    Good bye

  • Satellite L650 - ODD does not read most of the CD or DVD after BIOS update

    While DVD copy, asked me to do an upgrade of the bios for the included software on my laptop, so I thought that coming from toshibsa, it must be safe. I closed all my apps and let the update occur, restarted my pc and tried to continue to copy my dvd.

    Now my dvd writer does not read most of my CD or DVD, original as well.
    I managed to get hold of my previous Bios version after a battle before the update to see if I can go back to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it.

    Any help would be greatly appreciated I have two days to copy 100 DVDs for a customer and I can't do it now,

    I have a laptop Toshiba Satellite L650 running windows 7 64 bit 8 GB memory with a SSD hard drive

    > I can return to my old version, but the executable file runs a program that says the version is older then the one I use, so it will not load it

    I don t think that the BIOS is the problem here, the point is that CD and DVD support details are stored in the firmware of the CD/DVD drive and NOT in the BIOS of the laptop.
    So in my opinion the update of the BIOS is not the reason for your problem.

    I think you should check if cleaning the laser lens allows you to read discs.
    Use a fluid wadding tip and alcohol to gently clean the laser lens.

  • Satellite A200 - Mat * randomly a UJ-850 s does not read certain DVD or CD

    Hello

    I have problems with my dvd player Mat * a UJ - 850 s (firmware 1.40)

    Randomly, he's not reading certain dvd or cd.

    I called Toshiba support and they asked me to update the firmware.

    I explained that there are 3 updates of firmware for a player of TSS (NEC) DVD from Toshiba Web site but * NOTHING * for MAST * A

    They asked me to install the Toshiba disc reboot before sending to repair. Today I had time to fix it, but it does not read the startup disk!

    So I ask for Toshiba to publish an update of firmware for Mat * a UJ - 850 s

    What you mean under some CD or DVD?

    It is well known that something like this can happen. Because of this if you write here on self made CD/DVD, use empty brackets just high quality.

  • Satellite M-40, Mat * a DVD UJ - 831S does not read blank DVD

    It does not read empty, brand new DVD discs: Sony, TDK, etc., showing "a drive not accessible" and with a memory full 0 kB! but it reads DVD movies

    Hello

    Have you installed the Roxio Easy CD Creator software on your laptop?
    This problem may occur the Roxio CD recording program Easy CD Creator is installed on the computer, and if the version of the CD recording program is not compatible with Windows XP.

    Please check this page from Microsoft:
    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

Maybe you are looking for

  • My 4th Gen ATV is very slow

    My 4th Gen ATV is very slow to download a rental of the film (in hours). When I connect my ATV 3rd Gen and it plays the same video rental immediately. This isn't a unique event... (Same network, same account) Can you explain why? How should I do?

  • Screen turns off a few seconds

    Hello I had a prob... whenever I have plug in or unplug the charger, then the display shuts off for a few seconds... bt nt sound system kind of flashing, you can tell. response

  • My cat turned my screen upside down, please help me!

    It is really difficult to provide details on backwards and even more difficult to read the answers.  I really understand with people with disabilities now!

  • The screen does not match the screen size

    Hi all, any help here would be greatly appreciated. I have an Acer S240HL monitor I was using with my Acer PC without any problem. However, the hard drive on my PC packed and so I just bought a new ASUS Tower unit. When I plugged in the Acer monitor

  • StartupRepairV2 recovery questions

    My motherboard fried 2 years ago and I was just able to get a computer from a friend who's hard drive crashed. I installed my hard drive on the desktop and get the following Problem of same name: StartupRepairV2 Signature of the problem 01: AutoFailo