Satellite P200 - 1EE, problems of HD - DVD after you connect to the TV via HDMI

Similar Questions

• Satellite P200-1EE - problem with writing DVD

  Had a problem with a disc that would not eject from the drive. The drive light flashes and a rattling noise coming from the command.
  Windows then did not recognize the drive at all!

  After leaving from one day to the next, the disc came out at the start.
  Everything seemed normal, DVD plays no problem.
  However, I can't burn a DVD using Nero 6.

  I get an error message "Abandoned SCSI command". It never imagined before.
  Is that what I can do to fix this?

  There may be dust on the lens? Try to clean with a Microfiber cloth.

  You can also try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Unable to connect to the home network after you connect to the internet at Duke University

  Noteboook W7 Pro cannot reconnect to the network after you connect to the internet as a comments/visitor at Duke University.  The Duke system is predatory changes to my computer, and I can't fix it with the restoration of the system.   The home network is a Windows workgroup with most XP, no password only required machines.  This has happened in the past when the guest was an XP machine too, and then he had something to do with the DNS settings.  Cost me a lot of time and anguish and loss of productivity.

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you able to connect to the internet?

  See the help article and check if it helps.

  Method 1

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_2

  Method 2: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know the status of the issue.

• Satellite P200 1EE problems with playback HD video and USB ports

  I bought the laptop Satellite P200-1EE dixons for and I'm happy with it in many ways, but the main reason I bought the 1EE P200 was because of its potential to play and edit the video high defintion.

  I can't seem to play or watch video clips high definition without them being clumsy and with a frequency of images at 3 frames per second, and not the 30 frames per second, he must turn.

  The clips I'm playing are some MOV files record on my camera at 1280 by 720 resolution at 30 frames per second and the two Quictkime player and Realplayer they simply are not quite smooth. Given that the laptop has a DVD player high definition and a high-end graphics card ATI HD 2600 ispecifically intentional for high defintion watch a DVD high defintion to 2040 by 1080 I do not understand why he should fight with playback relatively low resolution video files.

  I would edit 720 video high definition and the speed of the processor, the speed of the bus, ram and graphics card should be enough for this high defintion video simple editing, so if he can not even play video high defintion, what chance does he have to edit video high defintion?

  After only 2 days of working completely fine Vista Vista completely crushed and the computer refused to restart. I had to use the recovery disk and completely wipe the hard drive. not a good introduction to vista which, apart from that, it was very slippery. After you have installed Office 2003 it works completely fine on Vista Home premium

  Does anyone have suggestions or solutions?

  Hi Daniel

  To be honest you message confuses me.
  The recorded movies (.mov files) are not format true high definition as in movies on HD DVD or Blue ray!

  I think you need to convert these files first in a format mpeg mov or avi format and then you can try to play with ordinary players like WMP, Real player, etc.

  Here are some useful tools;

  Converts mov to mpeg
  http://www.radgametools.com/binkhcon.htm

  Convert mov to avi
  http://www.JakeLudington.com/ask_jake/20051003_convert_mov_to_avi.html

  With regard to the question of the USB.
  Try to remove the USB port on the Device Manager and restart the laptop. After restarting again the USB ports should be recognized again and the USB driver should be updated.
  In most cases, this enables the USB flash drive.

• Satellite P200-1EE won't CD/DVD boot

  Hi all

  I try to boot from a boot Acronis True Image disk so I can install a previous backup of True Image saved. I press F12 during startup, but there is no listed CD/DVD drive.

  I tried to move the drive up in the selection of start in F2, but it doesn't always start the drive.

  What can be wrong here?

  Thanks for any help.

  Them

  Hello, Leslie

  This is the forum user and you will not receive response from Toshiba directly.

  Back to your problem: Please make sure that you can use the CD/DVD drive with the other bootable CD/DVD media. Have you tested? Try also to set the default BIOS settings and try again.

• Satellite P200-1EE: issues of HD - DVD - how to upgrade an HD-DVD player?

  Please excuse this if it is a basic question, but I'm still learning to use the P200 and find my way around Vista.

  I have problems with HD-DVD not playing does not and have downloaded a file
  hddvdpl-20071214135201.
  It contains 14 files and folders. One click to start the upgrade?

  I also checked the version of the driver for TS-L802A and seems to be day 21/06/06 6.0.6000.16386

  Any help please.

  Downloaded files of the HD-DVD drive is only an update. It s not a full version, and therefore, you'll need preinstalled full HD-DVD player.

  One question; did you find a .exe file in the downloaded folder?
  Please check and if necessary enforce it.

• Satellite P200-1EE - update of HD-DVD Player question

  Hard drive crashed a few days ago.
  Re-installed everything using the recovery disk.
  More than 200 updates to vista.

  TEMPRO installed after all updates for Vista.
  The problem is the update of the HD DVD of 2007 = callelua.asp? ID = 60624.
  Returned as an error page.

  No clue on what to do next, as the drive will work normal DVD using VLC Player.
  Consider that Toshiba are not now support HD-DVD on this machine?

  You need this player or not?
  I mean that if you use DVD movies only, you can remove the drive from the system.

  I think VLC player is good software and you can use it to watch movies.

• Satellite P200-1EE won't read DVD

  When he was working, DVD automatically play of Toshiba's HD DVD player. Now the disk swirls around a few times and then. Nothing, except for the odd work.

  If I click on the DVD player on my desktop, a box comes up saying "the specified drive is not found. Check the setting by going to settings - settings of the shares - Source, or otherwise verify that disk has been correctly connected to the PC.

  I have not checked the settings that I have no idea where to get them, but I guess that the drive is properly plugged to the computer he uses to work perfectly.

  Any help, or even a pointing direction in will be greatly appreciated.

  Thank you

  Hello

  Do you mean that you can not ready no matter what DVD using the Toshiba DVD player?
  Have you tried using other software like VLC player for example?

  I know that there is an update for Toshiba DVD player, but I don't know if this problem is related to the drive to DVD Toshiba or ODD (optical disc) of m.
  Therefore, you should test if you can use another software.

  Are you able to burn something to DVD disk?
  If not then a hardware problem may be possible

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Vista can not read CD or DVD after you connect USB/eSATA 1 TB external HARD drive

  Hello

  Can anyone help, I have had this problem since I connected an external hard drive. Vista cannot read drive, its visible in Device Manager, but has an error code 19.

  The drive works fine if I try a bootable CD/DVD.

  Have you tried the fixed charges:

  KB/314060

  KB/929461

  Kb939052

  Kb952951

  KB/316529

  GP/CD_DVD_Drive_Problems

  GP/hardware_Device_Problems

  Not that helped solve the problem.

  Would be to remove the old USB devices of assistance from the registry? How can I do this safely?

  Thank you

  Tim

  Hi Rob,

  Thanks for the son. HP do not have an update of the firmware.

  DevManView let me see all the devices that are installed.

  I disabled the device I think about the origin of the conflict, but which has not set a problem.

  I'll have to get the keys to void Current Control Set.

  Thanks for your help.

  Tim

• After you connect to the secure web site, I get the following: WDRES_ERROR_HTPPError. Is this a problem of plug-in or add-on?

  Have used this site for years. It has recently been updated

  To see if an extension could be linked to this problem, you can try to access the site Firefox Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

  Safe mode does not automatically neutralize plugins. If you think that the site is using one of those, and you want to see what happens when it is disabled, you can do it manually on the addons page.

  Firefox orange (or the Tools menu) button > Add ons

  In the left column, click on Plugins, and then edit the suspect plugin or ask to activate or to never turn on and reload the page.

  Any difference?

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• Satellite A300 - 1GC PSAGCE connect to the TV via HDMI on Win XP

  Hey everybody,

  is it possible to connect an A300 1GC with Windows XP to a fullHD TFT via HDMI Port?
  I can't find the drivers for the HDMI port on the Toshiba support page, there is one for Vista, so it is not possible with Windows XP?

  The VGA port can´t normal display solutions-HD 1920 x 1080, correct? (ATI Mobility HD 3650, 1 GB)

  Thx a lot for your help

  Podozyt

  AFAIK for HDMI port you need separate driver. Audio and video signal should be addressed without any problem, but I'm skeptical about obtaining a full HD resolution.

• Satellite P200-1EE I can install a 2nd hard drive in the Bay of spare?

  First of all, Hi everyone!

  I have the laptop model above, and he has a spare drive Bay. There are connectors for pins at one end, but it doesn't seem like the drive will fit. It's like there's a missing - like component case Connector for the 1st disk slot. I bought a 500 GB drive and tried to see if he would be in shape. The 1st disk has a metal basket attached, and who does not.

  Is it possible to install a 2nd drive for this model? If so, what would need to do?

  Thank you!

  Andy

  Hello

  If you have a connector in the second HARD drive Bay, you can add a second HDD. But you will need a wire basket as on the first HARD disk. Therefore, you can contact an authorized service provider because you can get all the parts on their part.

  On the Toshiba site Web is a list of all ASP s, check it!

• Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

  Help am stuck with it.

  Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

  Windows could not start because the following file is missing or corrupt:
  System32\drivers\isapnp.sys

  You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

  I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

  "File ntkrnlmp.exe could not be loaded.
  The error code is 4, sometimes it's 7.

  I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

  So any suggestions as to what wrong here

  Thank you very much

  I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

  [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

  Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

  Feedback would be much appreciated