Satellite P200-1FZ: how to insert the smart media card into the card slot

Hello

I have read the slim manual, and I can't find any info on the card slot. (other than where he lives on the laptop)

Could someone tell me please how to insert my card SmartMedia? the slot is huge and I'm worried about losing the card inside the laptop! I assume that the smart media will be automatically run?...

Thanks in advance!

It would be good to know what model of laptop you have.
But, normally, for the smaller cards, you will need an adapter that is often included, as for the memory stick pro duo.
I think it's just normal size and you have to put in the middle of the card reader slot until you hear a click.

If you have not changed the AutoPlay settings, you must get a new window with the files on your card, when you put it on your laptop.

Tags: Toshiba

Similar Questions

  • Satellite P200-1EE - how to replace the keyboard

    Ive just bought a replacement for my P200-1EE keyboard, I have an idea but how to replace, anyone know?

    Hello

    The keyboard is fixed with four screws that are hidden under the cover of the thin plastic strip above the buttons of the F1 to F12 keys keyboard.
    You may need to remove this plastic cover to gain access to the screws.
    But you must be careful because it could break.

    The keyboard is connected to the motherboard with a flat cable.
    First disconnect in order to remove the keyboard.

    But note; If your warranty is valid you should not try this because it might void the warranty.

  • Re: Satellite P200-178 - how to replace the HARD drive?

    Is it really possible to replace the HARD drive on this model? I have another satellite & which was 2 screws & pulling on one leg, job done.

    The P200 has an opening apparently get actually on the HARD drive but it gets you on the underside of the car, so I think that you will have to pass the upper part by means of the keyboard.

    Can anyone help? I lost 70 pounds on a HARD disk that cannot be mounted?

    Thanks in advance

    Hello

    As far as I know on all models, it of possible to swap the HARD drive.

    According to the user manual on the underside of the laptop it is a case of HDD for HDD1 and HDD2. This coverage is provided by one or two screws, I think that should be deleted. After that, you are able to exchange the HARD drive.

    Take a look on the underside. HARD drive swap is not complicated and can be done in a few minutes. :)

  • Satellite P200 - 1fc - how to fix the connector cc

    I damaged my laptop power connection.
    The only way to the laptop acknowledges that I'm hip is if I push hard on the adapter or rotate in a certain way.
    Can it be fixed and if so, how?

    Hello

    It is a job for a technician to the laptop.
    To replace this connector DC, the whole notebook must be dismantled and believe me; It is not really easy, but very delicate!
    In addition it s unclear to me if this DC connector is welded to other rooms.
    Therefore, I would not recommend unveiled for this problem in your own hand.
    You could damage the motherboard and it would be the worst case, because a mobo is a part of portable more expensive!
    I think that its worth to pay a little for a short workaround as to risk a complete laptop damage!

    Greetigns boyfriend

  • Satellite P200 PSPBGU: how to use the bluetooth?

    Hello
    When I run Bluetooth Configuration (start, toshiba folder menu), it says "device Bluetooth to connect, and then click ok. But how do I connect it?
    I also tried to use Nokia PC Suite, it can not connect to my phone via bluetooth.

    Hello

    Please see the bottom of your laptop. Every laptop comes with a BT sticker BT module there.

  • Satellite P200-144: how to disable the TurboCache graphics card

    Hello

    Is there anyway to turn off Turbocache because it is share 527MB of RAM. 256MB will do me well

    Thank you

    Hello

    I put t think that it of possible to disable the nVidia TurboCache graphics card.

    In any case, check the settings in the nVidia control panel.
    Try to set the Advanced view for even more options!

    But this option is only a slight hope I do not know if you find something on Turbo Cache m.

  • Satellite U500-12J - how to remove the DVD slot?

    I put a small DVD into the slot for DVDs.

    Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
    IST is possible to easily remove the whole out the small dvd dvd player?
    I'm knacked!

    I hope someone is able to help me!
    Ruby

    What Satellite you do you have?

  • Satellite A200 PSAEOE: how to upgrade the memory?

    I have a Satellite A200 PSAEOE.

    I recently bought a 2 GB memory PC2 DDR2 (667 MHz) part number: PA3513S-1M2G.

    How do I put in and I need another one of the same size as for the moment, I have 2 x 512mg inserted.

    Thanks GB

    Hello

    Did you check your user manual?

    You will find a details how to insert the new memory module.

    By the way; You can mix the sizes of memory. This means that you can insert a 2 GB + 512 MB RAM

    See you soon

  • Satellite P200-1EE - Vista stuck on the homepage

    Hello

    * My Satellite P200-1EE is stuck on the progress bar Windows Vista since yesterday morning * and I'm unable to contact my office.

    I tried several solutions using the F8 key at startup.

    1 / safe mode

    2 / startup repair. "Windows cannot repair this computer automatically.

    3 / the system restore. "No restore point.

    4 / windows complete PC Restore. "No restore point.

    5 / Windows memory diagnostic tool. It is said that there is no problem of memory.

    So I am only left with the options of 'Restore the full Windows operating system' and the 'command prompt '.

    But I'm not too sure of the latter option. That's where I need your advice.

    * If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? * I have several years of family photos on another partition (D or E) that I would not lose enough.

    Obviously, * I do not lose data or software on C:, but not personal stuff D or E.*
    Could you advise me on the best option?

    Thank you

    Paul

    > If I go for complete Windows restore, the entire hard drive fade or just the partition where I have windows (for example, "C:")? I have several years of family photos on another partition (D or E) that I would not lose enough.

    Depends on the disc that you would use if you want to use the Toshiba recovery disc, then the whole HARD disk would be formatted, including all partitions on the HARD drive.
    If you want to use the disk in Microsoft Windows Vista, you can choose which partition has been formatted and where the Vista must be installed.

    > Clearly, I do not lose data or software on C:, but not personal stuff on D or E.
    > Could you advise me on the best option?

    If you n t want to lose the data stored on the D partition and if you don t have a disc of Microsoft Vista, install the OS of Visa then I would recommend, remove the laptop HARD drive. Then plug the 2.5 SATA HDD with a USB-SATA controller then this HARD drive to another computer.
    Usually, you should be able to access the D partition and would be able to move all the data to another computer.

  • Satellite Pro 4200 how to avoid the mistakes of the ACPI

    Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
    The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
    Piotr Plecke

    Hello
    in this case it would be interesting what Type of laptop it is exactly.

    You will find this model on the bottom of your laptop. There is a review of it.

    Some models have a Bios update available, others not, for example.

    Please send additional information!

    Good bye

  • HOW to: Insert the symbol of the degree in text

    An another "How To" question.

    Running PE 13.1 on a Windows PC with WIN 7 64-bit.

    How to insert the symbol of the degree in text - I would like to have something like "temperature + 2 < degree symbol > water C.

    where < degree symbol > is the small circle (triggered).

    I found how to insert copyright (Alt + 0169) & the Tilde (Alt + 126) helped by Wikipedia, but the Windos ciode for the degree symbol is not shown - just the

    Unicode U + 2103 but Alt + 2103 just inserts a '7'.

    HEM

    HEM

    If you have the copyright © symbol to work for you with Alt + 0169, I think Alt + 0176, you should get the degree symbol as in 32 °.

    If please give it a try in the Titler, open Premiere Elements and let us know if it worked for you.

    Thank you.

    RTA

  • How to pass the time slot to the dashboard in URL parameters

    Hi all

    Does anyone have example on how to spend the time slot to the dashboard in URL parameters?

    That's what I tried. Normally, the dashboard has timeRange as a required context, I deleted and added "startTime" and "end" like required context, so that I can spend 2 timestamps in URL, and then I created a 'extra context' called "timeRange", which calls a WCF function to create a CustomTimeRange, it works pretty well. But the problem is if I have exploration down this dashboard to a different dashboard, the slot not transmitted properly. So I guess, I was not the right way. Does anyone have an example?

    Thank you

    Xiaoning

    1 re: timeRange not spent in drilldown pages

    Please confirm that you have defined one or more entries in context "Required". If you do not, please add a (like "hostName") and re - test. It work?

    2. with 'nologin' user URL redirects to the login screen

    Yes, what is expected. With nologin user, you should always use the form http://foglight_fms:80/console/foglight_ext?viewId=system:mywcfmodule.1?hostName=myhost of the URL rather than the

    form of http://foglight_fms:80/console/page/System:mywcfmodule.1?hostname=myhost .

    It would be great if you could post a brief description of your design dashboard once you have this work. That sounds like something that the other members of the Foglight community would be very interested!

    Kind regards

    Brian Wheeldon

  • Satellite - WIi 8 - How to use the SD card

    Windows 8 on Toshiba Satellite.
    I do not know how to connect my sd card

    I pop my card to build in reader and now what?
    Nothing happened and I don't know where to find the answer.

    Perhaps you could provide some i.e more details:
    What model of laptop do you have exactly?
    Have you changed anything in the configuration of the system?
    Do you use the Windows system preinstalled by Toshiba?

    Usually, if you insert the compatible! SD card in the SD card slot, after little time the SD card should be recognized by the system and should be visible in windows Explorer

  • Satellite P200-1FZ: Question about Vista performance index?

    I recently bought a P200D-128 announced as having 256 MB of memory graphic dedicated only to find only has a HD2400 with 128 MB card (the name must have been an idea, I know).

    I was looking for a model with 256 MB I had read that it was recommended for good graphics performance in Vista.
    On the P200-128 model Vista performance index showed:

    Processor: 4.8
    Memory: 5.9
    Graphics: 3.3
    Games graphics: 3.7
    Hard drive: 5.2

    If the overall score of 3.3 seems not be limited by the graphics performance.

    I now plans to upgrade this model to a P200-1FZ (which has a HD2600 with 256 MB memory card), but would like to know if it significantly improves the score of graphics and Vista performance index.

    If anyone has this model (or a relative) and could tell me the VEI score, I would be very grateful.

    Thank you.

    Hello

    Just FYI: I Satellite P200D-111 with ATI Mobility Radeon X 2600 almost 5 months now. I use Vista Home Premium and to be honest, I'm quite satisfied with the performance of Vista. Up to now, I also tested with several games such as Call of Duty 2, Call of Duty 4, El Matador and older games like FarCry and Max Payne 2 WXP. It works perfectly.

    I like Call of Duty 4. He funs all simply fantastic. I do not even use complete running. At the moment I think to upgrade RAM to have better running OS. in the end, I can say one thing: for the reasonable price, I have large notebook.

    Good bye

  • Re: Satellite A200-1ZF how to run the Toshiba face recognition system

    Hello

    How can I use on my Satellite A200 Toshiba face recognition system?

    The only problem with this software is the program do not see my cam.
    I mean... he see cam, but when I try to save the new face in system then I can read something like "the webcam is currently used or there is problem with hardware.

    So I turn off the webcam toshiba utility, but nothing has changed.
    The hand of the webcam is running correctly. Her webcam Chicony as in the series of toshiba A300 same driver is the same (date, time, number, series)
    So if someone knows what could be wrong please answer...

    Thank you
    Good bye

    Hello

    I checked the download page for your laptop Satellite recognition tool and the face is not available, so I assume that you downloaded it for a different model of laptop.
    It is not so important, and I think it should work anyway.

    I have more Satellite P200 and he was also delivered without face recognition tool. I installed it anyway and it works perfectly. My laptop have factory settings and camera Assistant software is DISABLED.

    Your laptop is installed with the recovery image too?

    Try to remove the preinstalled face recognition software and remove the webcam in Device Manager, restart your laptop and try to install it again. It works on my laptop and I see no reason why it shouldn't work on your too.
    On this forum many people asked if this software can run on older models of laptops and a lot of people have confirmed that it works well.

Maybe you are looking for

  • tsassist.exe notice 'abnormal termination of the program.

    In addition to the above notification, I also received error reports or the following problem: 1. http://wer.microsoft.com/responses/Response.aspx/683/en-za/5.1.2600.2.00010100.3.0?SGD=297ac1a6-a3b6-49d7-8906-dd2fca1ebd7c&Bucket=0xEA_nv4_disp%2b214b2

  • Simple questions OS10 BlackBerry

    I have this code /* * Copyright (c) 2011-2013 BlackBerry Limited. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * htt

  • Demo of location

    I gave the demo of location a shot. The application compiles ok in JDE 3.6, but when I deploy in a simulator (the sim card to the AT & T 8100) I get a runtime error: Eception exception: lack of resources com.rim.samples.device.localizationdemo.Locali

  • CS6 flash does not start after the first time.

    Hello! I installed Flash CS6 creative cloud in a previous version to open some old files. It works fine the first time you open it. After you close the it and try to open again, it shows the popup flash for a second and she disappears. Same thing ove

  • How can I put a background of movement behind the video green screen

    Hi people a novice (like today) here. I shot some videos of a person standing in front of a green screen. Now, I would like to add a background of movement instead of the GS.Is could someone please tell me how this is done? Thank you very much in adv