Satellite P200 and Toshiba HD-DVD-sound but no picture

I have a Satellite P200-1EE. When you use the pre-installed Toshiba HD - DVD player to play DVD, I get no picture only sound pieces. Should I update etc?

The DVD and others play OK on other programs. Any ideas.
Thank you

I'm not 100% sure but I think that Toshiba has designed the HD-DVD player for only the HD-DVD media.

According to the specifications of the laptop on your laptop must be available to both players. A Toshiba DVD player and a Toshiba HD-DVD player. Am I right about that?

> The DVD and others play OK on other programs
And which do you use?

Tags: Toshiba

Similar Questions

  • Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

    Hello

    I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

    I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

    I tried the update audio drivers but it tells me that I have already installed the drivers the best.

    Any help would be most appreciated.

    Thank you for your time.

    Hello

    What OS do you have?
    What is Vista?

    If yes then another question; have you installed SP1?

    Please also see the European driver of Toshiba page and choose your model of laptop.
    There is a DVD HD v4.32.00 patch reader.
    The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

    See you soon

  • Satellite L750D - Window Media Player has sound but no picture

    I have a laptop Toshiba Satellite L750D, Win 7 Home Permium. I don't know why Win Media player was just the sound but no pictures. Please someone help to solve this problem. I don't have a recovery disk. Where I can down load it? I'd really appeciate your help. Hien

    Hello Hien

    I put t know which video files that you want to watch, but I strongly recommend using VLC player. It's a very good player and you can download it for free.
    Test it please and post comments.

  • I downloaded a program to watch on my Media Player and when I press on play I have sound but no picture, only models. How can I get the picture?

    original title: help!

    I downloaded a program to watch on my Media Player and when I press on play I have sound but no picture, only models. How can I get the picture?

    What is the format of the video file?

    If the extension is. AVI... no guarantee... but maybe
    you need the XviD Codec.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    XviD Codec
    http://www.xvidmovies.com/codec/

  • When I play DVD Media Player or Media Center I have sound but no picture just a green screen. Can you help me?

    When I play DVD Media Player or Media Center I have sound but no picture just a green screen.  Can you help me?  I'm on OS = Windows Vista Home Premium SP1 64 bit with graphics = ATI Radion HD 3450 512 MB

    Green screen normally means that you try to play content HD on a screen that is not HD ready or you try to play a pirated copy of a DVD

  • When you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the photo in Windows Media Player.

    * Original title: Windows Media PLayer

    I have Windows Media Player version 12 installed but when you try to play .mp4 files in WMP, I hear the sound but the picture is distorted and I can't see the picture.  Please see image attached.

    Even if I see that I can change the version of the file in a different format, I have the same problem with videos on websites that I can not of course change the format before playing these.

    I managed to fix the problem for about 20 minutes by flattening my computer re - install the operating system and this resolved until all updates have been through, and then it disappeared again.  I tried many codecs packs and this still does not help.

    My system is running Windows 7 and Media Player version is 12.0.7601.18840, which tells me that Media Player is the most recent version.

    Please can someone help?

    Open uninstall a program in windows and in the left click on the feature to turn on or off windows. Clear the check box of the window Media Player, and then click ok. This will uninstall the drive, and then restart.

    After restarting the same steps, now, check the box for the same and perform a restart and if all goes well it should solve the problem.

    Note: Make sure that Windows is up-to-date.

  • Stor.e TV + - playing .mkv files have sound but no picture

    I just transferred all my .mkv files on my store TV + but most of them have sound but no picture? They play fine on my PC...

    Also, in any case to change the icon of the folder on the actual dvd cover on the store TV +? Sick to see the yellow folders!

    Thank you...

    Hello
    Find the StorE TV + specifications on this page from Toshiba:
    http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/TV-plus/

    The Store TV + supports video formats: MPEG1 (DAT, MPG), MPEG2 (VOB, MPG, TS/M2TS/TP TRP), MPEG4 (AVI, MP4, MKV), VC-1 (WMV), H.264 (AVI, MKV, MOV, MP4), RM/RMVB (RM/RMVB)

    MKV files are supported by the MPEG4 and H.264 video format.
    Files are saved in these formats?
    How about you play other i.e. MPG or AVI files?

    In addition, I would recommend checking the connection to the TV.
    Here is a user manual that I found on the page of Toshiba:
    http://www.Toshiba-multimedia.com/global/manuals/store/manuals/STORE_TVplus_User_Manual.PDF

    It shows you how to connect the Store TV + correctly.

  • Sound but no picture with a key of dvb hybrid usb (PX1256E-1TVH)

    Hello
    I am usind this usb key in windows 2000 on a laptop from another manufacturer (that is to say PIVm 1.8 Ghz, 512 MB RAM, ATI Mobility Radeon 7500 with 32 MB of memory dedicated)
    With Savvy TV 2.2.2

    I use it with a normal antenna (used for my usual TV) and have a clear sound, but a white screen as image :-(and I don't mean to a radio (as the FAQ imagine (!)). I use the analog TV (DVB)
    DirectX 9 .0c is intalled
    PS: The USB works, but with a poor image, with another pc (laptop) and an antenna that is smaller (because I don't have access to the antenna in this room)
    Any idea?

    Kind regards
    Fred (France)

    Please download the latest software of the Europe of Toshiba page!
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    You should search;
    Options of-> options USB-> TV Tuner-> tuner DVB - T Tuner or TV hybrid USB

    Remove the old software, restart laptop computer, erase the registry with CCleaner and reinstall the new software for the Toshiba page!

  • VOB has sound but no picture (gulp!)

    Hello

    I've transferred a video tape on a DVD, and he met with five. VOB files.

    I can load the last four in first Adobe Elements 7, but the first produces the message "this file type is not supported, or the required codec is not installed.  It's strange as the other four works very well.  I have truied by renaming the file a .mpg file and the same message occurs.  When I play the file in Windows media player, he plays with sound but no picture.

    Can someone shed light on this please?

    If your Handycam from Sony has transmission capabilities, this would be my first choice. You will have the remote control, like your VHS player will be connected via composite or S-Video cables and Audio, but with a bit of work with your remote control and your mouse, one in each hand, you can get very close. Just to start the Capture a moment earlier and cut then the video blank at the head of the clamp.

    Good luck and you check Sony manual for exact setting you need to pass through.

    Hunt

  • Possible work around sound but no picture...

    It is NOT a question but a possible work around. Youtube videos have sound but no picture. In this case, you can click on the small arrow to the right, near the right side of the address bar. This reloads the page and the problem seems to be fixed. You must do this for each video with sound but no picture. Should not, but it's a work around.

    Moderator edited the title to remove the question mark

    Hello

    Thanks for the useful information. Can you Post a response (below), possibly add more details and mark it as the solution.

  • I can hear the sound but no pictures on some internet news sites.

    Hello everyone, I have a Windows 7 64 - bit laptop computer. I hear the sound but no pictures. Why is this? Thank you. Ldxrunner.

    Hello everyone, I have renstalled VLC 32 - bit version, as suggested by the VLC Forum. Thank you. Ldxrunner

  • in windows movie maker I get sound but no picture when I try to view loaded videos__

    I have sound but no picture in windows movie maker.  Have already tried to restore filters to the State of origin without success

    I have sound but no picture in windows movie maker.  Have already tried to restore filters to the State of origin without success

    =====================================
    You may have a problem with incompatible source files:

    Several formats are apparently compatible with Movie Maker
    but the most reliable choices are:

    Photos - bmp
    Video - wmv or dv - avi
    Music - wma, wav, wmv

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Error setting output Satellite A300-1jh - Toshiba HD DVD Player - audio

    I have a problem! When I try to play a dvd on the toshiba hd dvd player its gives me an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

    I read a similar thread on this forum in which it is said that I should install the latest version of the Reader 4.51.07! I installed it, but the message keeps coming back! I have windows vista ultimate 32 with all updates! What do you think I should do? Thank you.

    PS: I have a satellite a 300 (psagle) 1jh

    Post edited by: petrutjim

    Hi mate

    I found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=162772

    He's certainly the same question as in your case and the solution was a DVD player patches installation or installation of new full HD DVD player.

    Notes; the Vista should be also updated!

  • Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

    I have a problem simular with a P200-140.

    When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

    I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

    I don't know if it's maybe a switch problem?
    Y at - it a contact microphone that could stick when you close the lid?

    I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

    Hi Mortiss,
    Maybe the backlight of the lcd screen went... (I don't think)
    or broken wires... (!)
    or the lid switch is defectiv (rare)

    ask a servicepartner to help...

    deassemble unity... or watch this will kill your warranty...

  • Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

    I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
    I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

    Please anybode help me?

    Hello

    How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

    Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

Maybe you are looking for

  • Other results: preliminary report does not properly during the first run in a loop

    I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test c

  • Cannot find enough available video memory when running GTA on Windows 7

    Original title: cannot run the game of GTA on window 7 ultimat? ___i can't run any verson survival gear high game... __plz help me I have a problemm on running the game gta...I have an error like "grand theaf auto VC cannot find enough memry video av

  • Acer Aspire E1 - 571G - load

    Hey everybody, I've had my Aspire E1 - 571G for about 2 years now. Data sheet: 3230 M i5 12 GB of RAM (1x4Go) (1x8GB) - 1333 MHz (updated original 4 GB of RAM) WD 500 GB (5400 RPM) HARD DRIVE Windows 7 Ultimate x 64 He began to develop a problem then

  • How to use ID 2, MSN messenger?

    I have 2 ID MSN and you want to use both at the same time from a computer and a Messenger, so please let me know how I can do it.

  • VLAN N3048-PC6224

    Hello world I'm trying to configure a valn between 2 switch (real-time 4 switches but stacking 2 / 2) My config is quite simple: N3048: ethernet interface 2 / g26-> first computerswitchport access vlan 2output interface tengigatethernet 2/0 / 2-> opt