Satellite P200 - Microphone has stopped working after installing Windows 7

Similar Questions

• Satellite P300 - Microphone is not working after installing Windows 7

  Hello

  I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
  I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

  Thank you
  James

  Hello

  Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, it should be possible to use the internal mic.

  By the way: internal what application you are using for the microphone? Skype or something?

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite U300-130 - TosBtMng has stopped working after installing Nokia PC Suite

  I have the same problem too... with Toshiba Satellite U300-130.

  Bluetooth worked well enough before I installed the Nokia PC Suite for my mobile on my PC (new version 7.1.26.0 Web site).

  To be correct, as a first step, I even managed to maintain a connection between the PC and the Nokia Bluetooth and ran the synchronization of the contacts. I tried several times, but each time synchronization run ended with the message "PC couldn't get response from your Nokia.

  After the reboot, my PC went crazy and started broadcasting the message "TosBtMng has stopped working" and it restarted every time that I ask him to close.

  Installation of the new version of BT Stack (6.40) does not resolve this error.

  Help, please

  I also use Toshiba Satellite, I use this [suite Nokia pc | http://www.softsea.com/review/Nokia-PC-Suite.html] version

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1

  Hello

  My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,

  It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.

  Help, please!

  DESKTOP WINDOW MANAGER HAS STOPPED WORKING
  Windows can check online for a solution to the problem

  -> online and are looking for a solution (recommended)
  -> close

  APPCRASH
  Application name: Dwm.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e02696
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb74dd3
  Exception code: 80000003
  Exception offset: 0000000000045f00
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 0fef
  More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
  Additional information 3: f196
  Additional information 4: acf765d48a0657c8822f379a6b5f3b91

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Sorry to tell you,

  I already solved the problem.

  Just to let you know, I buy the product, because

  I used the free and they don't really work (IN MY OPINION).

  Anyone has this PROBLEM (appcrash)

  Go to start

  Click on Control Panel

  go to appearance and personalization

  Click on appearance color of windows.

  then click on settings in the appearance of progress.

  under the gaze of point for the theme of basic or something like that.

  Want more info on Dwm.exe?

  Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/

• Microphone no longer works after installing Windows 7 Ultimate

  I recently installed Windows 7 Ultimate on my laptop Acer Aspire Timeline (exact model Acer Aspire Timeline AS4810T-8480 14 inch HD laptop screen). I noticed that once I installed it, my microphone/sound stopped working. I have no problem listening to the audio, but I think that the microphone was affected. When you use Skype, that is the message that appears: "micro problem: there is a problem with the microphone into your computer." Try plugging a USB headset for this call. I know he's had no problem with my microphone before I installed Windows 7 and had been using Skype without problem. Can someone help me solve this problem? Thank you.

  Hi Ana

  Yes, first you recommend to contact ACER to your hardware mic problem.
  try to update your sound driver from device (right-click on computer management<>
  or download the Audio driver from the ACER site
  If persists
  uninstall the Audio driver and install the driver updated again, reconfigure the Mic and test the question.
  I hope that the problem will be resolved quickly
  concerning
  Nikhil
    

• Vista 'Open file location' has stop working after installing IE9 Beta

  My context option 'Open file location' has quit working on all the shortcut files (.lnk).  Choosing 'open file location' triggers WITHOUT ERRORS and seems to not trigger any increase in CPU activity, or I can't detect any change in process explorer, it's just nothing at all.  BUT it doesn't seem to work because he used for the FIRST time (and only the first time) I have choose it from a shortcut on the desktop after a reboot... as long as I do not first open all records.  PLEASE NOTE that this behavior only started in the morning, after I installed IE9 Beta on my computer.

  I use Vista Ultimate SP2 on a box of Dell, Intel Pentium D 3.00 Ghz with 3.5 GB of Ram.

  I rely heavily on "Open file location" to navigate through my system so that your help will be greatly appreciated.

  Here's the sumery of FileExtInfo.exe of my .lnk file associations:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Information of the file association [.] LNK file type]
  Page generated by FileExtInfo v2.0 on 20/09/2010 10:13:13

  FileExtInfo © 2005-2007 Ramesh Srinivasan.
  Homepage: http://www.winhelponline.com
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  [HKEY_CLASSES_ROOT\. LNK]
  @= "lnkfile".

  [HKEY_CLASSES_ROOT\. LNK\ShellEx]

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214EE-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {000214F9-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {00021500-0000-0000-C000-000000000046}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellEx\ {BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\. LNK\ShellNew]
  "Handler" = "{ceefea1b-3e29-4ef1-b34c-fec79c4f70af}".
  "IconPath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,68,00,65,00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 2 c, 00, 2d, 00,------.
  31,00,36,00,37,00,36,00,39,00,00,00
  'ItemName"="@shell32.dll,-30397 '.
  'MenuText"="@shell32.dll,-30318 '.
  "NullFile"=""

  [HKEY_CLASSES_ROOT\. LNK\ShellNew\Config]
  "DontRename"=""

  [HKEY_CLASSES_ROOT\lnkfile]
  @= "Shortcut".
  "EditFlags" = DWORD: 00000001
  'FriendlyTypeName"="@shell32.dll,-4153 '.
  'IsShortcut '=' '
  "NeverShowExt"=""

  [HKEY_CLASSES_ROOT\lnkfile\CLSID]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\OpenContainingFolderMenu]
  @= "{37ea3a21-7493-4208-a011-7f9ea79ce9f5}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\UltraSentry]
  @= "{8EBAD5CA-D4BF-44CF-84D8-C38B1464303D}".

  [HKEY_CLASSES_ROOT\lnkfile\shellex\ContextMenuHandlers\ {00021401-0000-0000-C000-000000000046}]
  @=""

  [HKEY_CLASSES_ROOT\lnkfile\shellex\DropHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\IconHandler]
  @= "{00021401-0000-0000-C000-000000000046}.

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers]

  [HKEY_CLASSES_ROOT\lnkfile\shellex\PropertySheetHandlers\ShimLayer property page]
  @= "{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}".

  [HKEY_CLASSES_ROOT\SystemFileAssociations\. LNK]
  "FileOperationPrompt"="prop:System.ItemType; System.FileOwner; System.Author; System.Title; System.Subject; System.Comment; System.DateModified; System.Link.TargetParsingPath ".
  "FullDetails"="prop:System.PropGroup.Description; System.ItemType ".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithList]

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\. LNK\OpenWithProgids]
  "lnkfile" = hex (0): "."

  Thanks for the reply Martinez!

  1. sometimes for all the shortcuts in all folders, including the office.

  2. sometimes for shortcuts related to music files, JPGs, microsoft word files, exe files, and others.  The shortcuts are in several different directories.  It is worth noting that the target location listed in the properties files is correct exe programs will be running, and music or photo files will play/display double clicked.  Only problem is NO way to open the folder of file location of the shortcut target.

  Step 1: Permissions for all folders that I normally use are the same they have been for years, which includes the folders that contain the shortcuts and those containing targets.  They are: 1) the permissions of system-all verified.  (2) MyName (HOMEPC\MyName) - all verified permissions. (3) Directors (HOMEPC\Administrator) - checked everything except special permissions.  The exception being the 'Programmes' to root folder that has no permissions other than read, execute, and list.  Subfolders for individual programs have the same permissions as mentioned above for my usual records.

  Step 2: I uninstalled IE9 Beta and the location of the file open function has been restored as if by magic!  .Lnk file associations appear to be identical to what they were when that was the problem.  IE9 has maybe a bug or an incompatibility in this somewhere1?

  Thanks for your help... I'll check to see if it is what I do for IE9, like the speed increase!

• Sony motion eye cam on my sony vaio vgn-fe48g has stopped working after installing win7

  Please could someone help me to set up the Board Sony motion eye cam and FN keys that don't work after upgrading from Vista to Win7, Sony are no help at all.

  Device Manager can't even see the cam. I tried to install it manually and the nearest me am added the cam, I was able to start.

  Maybe you are missing the drivers. Are there drivers available for this W7?

  You should check with Sony for your specific model and area/region Web site to see if they provide any W7 drivers at all. If Yes, have you installed them for the web cam?

  EXAMPLE - this site is for the India, they have a few drivers for Vista HP 32 bit, but none that seems for W7 HP 32-bit. - http://www.sony.co.in/support/product/vgn-fe48g

  This is a missing driver for W7 then issue you might try to install drivers vista in compatibility mode, but this is not guaranteed and can cause other problems. Back up your data first to be safe. See http://www.sevenforums.com/tutorials/98073-drivers-install-vista-drivers-windows-7-a.html and you need the correct version of the pilot 32 or 64 bits depending on the case.

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite L305D - Touchpad does not work after installing Windows 7

  I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

  I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

  Here are the specs of my model:

  PC x 86 ACPI
  64-bit AMD Turion X 2 processor
  ATI Radeon 3100 graphics card
  Synaptics PS/2 Port TouchPad

  I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.

• Evy HP dv7 - 7323cl: camera and a Microphone has stopped working after the upgrade to Windows 10

  Hello

  1. I updated my OS from 8.1 for Windows 10. Since then my camera and microphone work stopped.
  
  2. in addition, my model (HP Envy dv7 - 7323 cl) is a support drivers HP for windows 10? Because when I search for drivers on the Hp website and selecting my laptop model gives only two options to download the drivers for Windows 8 and 8.1.

  I don't know if windows 7 is a good idea?

  Thank you

  Mazhar

  Hello
  
  I found the problem. It wasn't on any Windows 10 or any driver.  I recently replaced my laptop screen and everything by replacing the technician missed a small plug to be inserted into the socket near the area of Webcam. And this is responsible for the functionality of microphone and webcam.
  
  Thank you!

• Pavilion 15-p036tx: Wifi stopped working after installing windows 7

  I ranked just down windows 10 to 7 on the habit of wifi to my work laptop and a couple of drivers download attempts failed too. kindly help!

  Hello:

  The Broadcom wireless and bluetooth drivers I posted should work because the hardware ID will let you match the parts list said.

  The ID is the Realtek ethernet card and you need this driver for it.

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp68947.exe