Satellite P200 - problem with the use of disk HARD original as external drive

Similar Questions

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• Satellite A500 - problems with the temperature of the GPU

  The thing is playing Age of Empires online I started having problems with the temperature of the GPU. When you run the AIDA64 the CPU stress test can hold up well, but after 35 minutes the test what AIDA suspended while the GPU fan can't seem to download their revolutions, (I guess that if there was that a rise in temperature would increase the speed of rotation of the fan, don't).

  I consulted the manufacturer of the GPU, nVidia, (the graphic is nVidia GeForce GT 230 M) and tell me to contact Toshiba for other options, since, according to them, the problem is not the GPU.

  Any ideas or suggestions?

  You use your laptop to factory settings?
  Have you installed something that may be responsible for this (non-Toshiba display driver)?

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• problem with the use of the model

  Hello

  I use Photoshop CC and all the time I have a problem with the help of veneer of reason. In fact, I can't use any template, because when I opened the window of boss, there is always this same situation-> window does not open properly /It is the visible part of the window and when I pressed on it do not bosses see / so I can't use any model - printscreen below :

  

  How can I solve this problem?

  Try resetting your preferences.

• Satellite A100 - problem with the operation of the battery

  Hello!

  My laptop (I bought 1.5 years ago) has a big problem when you use with the battery.
  First of all, with a fully charged battery, the notification of "limited battery status" appears after 2 minutes of operation and after 5 minutes, he goes to the standby mode due to the level of the battery is very low.

  Then, I plug it into the AC power and the battery remains yellow for about 15 minutes light and then turns blue.
  (The battery is OK, I tested it on another satellite A100)

  What can be the problem?

  Thanks in advance!

  Maria

  Given that you have tested the battery in another satellite A100, the problem must be in the settings of your computer:

  1 > START > CONTROL PANEL > POWER SELECT THE OPTIONS ICON

  2 > you will now see a screen that shows your management food and note * one * has a tick that is a small point in a circle:

  3 > BALANCED > POWER SAVER > HIGH PERFORMANCE

  4 > THE PLAN OF POWER > CLICK ON CHANGE PLAN SETTINGS > WILL DISPLAY A SCREEN SHOWING YOUR PLAN!

  5 > GO TO > * CLICK * WHERE IT SAYS CHANGE ADVANCED POWER SETTINGS

  6 > IF YOU SCROLL THE BAR TO THE * SIGN + > BATTERY-CLICK * THE * SIGN.

  7 > YOU SHOULD HAVE: you will need to have play with these settings, or you can click on restore plan defaults to see if that will solve your problem

  Notes by clicking on the * + plus SIGN next to tany of these options below will allow you to change what event happens on your computer.

  + CRITICAL BATTERY ACTION

  + LOW BATTERY LEVEL

  + CRITICAL BATTERY LEVEL

  + LOW BATTERY NOTIFICATION

  + BATTERY LOW ACTION

• Satellite U400 - problems with the Panel, the touch and media keys

  Hello, I have the TOSHIBA Satellite U400. Everything's a lot but I have some concerns.

  1. the touch screen (media buttons on the top of the keyboard - mute-media-play/pause-stop-rewind-forward-) turn
  the computer running if you touch! How to stop that from happening? I only need to use the POWER button.
  Start button / stop is sufficient.

  2. press MUTE on the touchscreen, no its not really "mute" or "disable." Instead, she don't
  is the Tower the White Glow Light for all Touch Panel ON and OFF (including the word "SATELLITE").
  How can I make it works?

  3. When you connect to Windows, I can choose between the password or RECOGNITION of FACES. How do I
  Assign the FACIAL RECOGNITION only without having to choose it?

  Thank you

  SAL :)

  Hello Sal

  I played around with this stuff and here is my opinion on this subject.

  (1) as far as I know there is nothing strange. I noticed the same thing on notebooks too. For example, if you want to listen to music, you can simply press PLAYER button (3rd from left) and begins at will for laptop and open windows media player. If you want to go on the internet you can simply press INTERNET ((deuxieme button on the left). Laptop will be put into construction and Internet Explore will be open.
  So there is nothing strange, and even get on my Satellite P200 and brand-new Satellite A300.
  To be honest I don't know if this can be disabled. I'll ask a friend of mine. It is monster of Toshiba and maybe he knows more about it. But this behavior is certainly not strange.

  If you want to use only the power button and then press power button to start. Do not touch the other.

  (2) Please check s operating manuals and look for info on this button. AFAIK it is clearly written Mute or LED on / off depending on the model you purchased, press this button to mute the sound or turn on or off the illumination of the logo of the brand, touchpad and buttons.
  So please do not mix anything. This button has no two options. On your model, you can disable illumination only. It is the same on my laptop. So there is nothing wrong with your laptop.

  (3) you also misunderstood this feature. If face recognition is activated the two options will be displayed. If you do not want to enter a password you can use the option of face recognition. But what you will do if for some reason your face may not be identified correctly. How you want to connect?

  So, please don't be irritated by these things, everything is OK.

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Satellite P300 - problems with the buttons of enlightenment

  First of all, I would like to apologize for my bad English, I'm French actually.

  Hi, I bought a laptop Satellite P300, a couple of days, and already I have a problem with tactile keys (one on top of the keyboard).

  Actually, the only one of the left, which is supposed to turn off the sound used to keep away the keys lights and Satellite logo. One day (and I don't know why), when I pressed her, she actually cut the sound. And now, the first two keys (mute and shortcut of windows media) do not work, but the other four (Media Player control).
  I tried Toshiba Assist, and the tool for the configuration of the pushbuttons (I don't know the English name of this tool) but I couldn't set the keys, they were not on the list "button name".

  So, does anyone have an idea how to solve this problem?

  I apologize again for my English.

  Hello

  I assume you are using Windows Vista because you bought the laptop a couple of days and so I think that you should try to reinstall the Toshiba value added Package. This package determines the buttons of the lighting that you mean and others (for example the FN keys too).

  The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  1. download the latest PPV on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

• Problem with the use of MID/LEFT functions

  I have a problem, see the point of these functions if (as seems to be the case) they will not allow another cell to be referenced.

  I want to do a SUMIFS with match being the first four characters of another cell data. I can't find any way to do it without manually copying the first four characters in another cell.

  If I use only LEFT like this:

  LEFT ('ABCD', 3) to derive 'ABC '.

  so why would just enter ABC in the first place? But that's what show examples and any attempt to do what I really want

  that is LEFT (F19: 3)

  causes a syntax error.

  I believe that I'm missing something really stupid, but I'm darn if I can see it.

  Hi jon,

  LEFT (F19: 3)

  causes a syntax error.

  Try a comma in place of the colon

  

  = LEFT(B2,3)

  It's your area used for the decimal point. If you use the comma for decimals, use a semicolon in the formula, = LEFT(B2;3)

  Kind regards

  Ian.

• Satellite L300 - problem with the battery and with the FN keys

  Hello

  Please help me with the following 2 problems:

  1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

  2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

  Thanks in advance for your help.

  (1) install VAP (value added package) and Flash memory card Support utility.
  For example, you can find the driver area L500 software.

  (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
  I switched to Windows 7 and the battery still works fine.

• Satellite C660 - problem with the upgrade from 4 GB to 8 GB

  Hello

  I have a Satellite C660-124 64-bit with Windows 7.

  I tried to extend the RAM of 4 GB (2x2gb) up to 8 GB (4x2Go), but the laptop is stuck on the 'Starting Windows' screen (I've already updated the BIOS and also if I tried with a new installation, the problem is the same).

  Aries is Kingston 4 GB PC3L - 12800 CL11 204 pins SODIMM
  Link: [http://www.kingston.com/datasheets/KVR16LS11_4.pdf]

  Please
  Thank you to

  Well well, its certainly possible to increase the RAM up to 8 GB of RAM.
  Your case looks like a new RAM isn t entirely compatible or the module could be defective.

  Toshiba says that the DDR3 RAM (1 066 MHz) 4 GB RAM PA3677U-1M4G module should be fully compatible.

  The module PA3677U-1M4G should be the same as the module of Kingston KTT1066D3 / 4G
  You certainly need a module SODIMM DDR3 1066 Mhz PC3 - 8500 204 pins.

• Problem with the use of the external hard drive.

  I was using a disk external hard seagate to store pictures. All of a sudden, it wants me to format the drive. If I do this, will erase all my photos? Is anyway around that I wouldn't lose thousands of photos.

  On Sunday, August 3, 2014 20:49:55 + 0000, CEDGR1208 wrote:

  I was using a disk external hard seagate to store pictures. All of a sudden, it wants me to format the drive. If I do this, will erase all my photos? Is anyway around that I wouldn't lose thousands of photos.

  See Zigzag3143 answer you and I would add the following:

  If you have only one copy of all the files that are important to you,
  whether on an internal hard drive, external drive, or anywhere else, you
  are always in danger of losing. It is always possible that a hard
  car accident, near Thunderbolt, user error, virus, attack the same
  stolen computer, can result in the loss of everything on your drive.
  As it has often been said, it is not a question of whether you'll
  such a problem, but when.

  I hope you succeed to save your photos, but for the future, be
  of course, you always have a backup of these and any other
  important files on external media.