Satellite P200 - Product Recovery Disk 2/2 does not work

Similar Questions

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Recovery disc Creator program does not work

  I bought a new Tecra, because I have Nero to burn discs, I removed Sonic my system and after that I recognized that recovery disc Creator program does not work!
  I reinstall Sonic using Toshiba Application install, but nothing has changed and said: my recovery disc Creator program. "shortcut is broken!
  I searched the Forum, but could not find any solution
  is there anywhere to download recovery disk creator program?

  Hello

  the link is still present? If so, right-click on the shortcut and tell what program or the name of the program is linked. Maybe we can find something to take home your recovery disk creator.

  You know, that sounds really weird that a program always disappears after reinstalling the burning program sonic. Maybe it s just a special option or something that needs to be enabled.

  Welcome them

• Satellite L300 - product recovery disk hangs on step 2 of the installation program

  The product recovery disk will not work, it hangs on step 2 of the installation program.

  Help appreciated

  Hello

  Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

  If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

  I m with Verbatim DVD-R

• Satellite L650-12 q - recovery of Windows 7 does not work

  Hello

  I have Windows 7 Home Premium (64-bit) edition in my laptop Toshiba Satellite (L650-12 q) and after a new start the Windows stopped working. I have a recovery disk that does not load (I'm done with the pointer in a blank screen) and the drive to install windows 7 would not work either (same thing). Safe mode no longer works.

  This probably means that the partition has a problem I'm wrong? -J' used Ubuntu Live CD, which confirmed that c:\ cannot be mounted while d:\ can.

  The problem however is double: a) I'm not sure that aspect of my data is accessible or not (I can't check) and b) I can't reinstall Windows, as Windows 7 installation process does not work.

  Any ideas please on what to do next? I want to access the partition, have searched on the internet (even tried with a Windows 98/XP boot disk), but had no chance that the partition is written in a newer way, which is not detected by them...

  Thank you in advance.

  > I have a recovery disk that was not loaded (I'm done with the pointer in a blank screen)...
  Do you use it for the first time?

  In any case, try to start the recovery disk, follow these steps:
  -Launch the laptop model and when you see the Toshiba screen home press F12 repeatedly to enter the boot options
  -When the boot menu appears to place the recovery disc into the optical disc drive
  -in the menu choose the CD/DVD drive and press ENTER
  ODD must start recovery disc playback.

  What happens when you do this?

• Satellite P200-199: Chicony Camera assistant software does not

  OK, that makes me crazy. I read all the papers that came with my new computer. I have been using / computers in construction since 1994. The camera on the P200-199 does not work, the drivers are not recognized on my vista operating system. I tried other select USB driver it, didn't work. Research on the cd of restoration for more than an hour - was not found.

  I've not seen anything listed at pages 4-8-4-9. There is NO Camera Assistant Software"located 5 research for it on my computer. Tried yahoo, aol, msn all who have web applications cam - none of those who built it in camera.

  Yes, with this in mind, where I can d/l the software for this camera to work?

  Hello Dave

  Before starting any discussion please can you follow me thing: has your laptop or you factory settings installed your own OS?

  By the way: I'm really confused you with as much experience PC don't know what is the recovery image?

• Satellite L40 - 16 d and WXP - WLAN does not work

  After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

  maybey upgreate BIOS solve the problem?
  the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

  Anyone know?

  > bios maybey upgreate solve the problem?

  Update the BIOS?
  Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

  I think that you have not installed the right WLan driver.

  Satellite L40 - 16 d belongs to the series of PSL48.
  The drivers are available on the page of the Toshiba UE driver:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
  Note: You must select Archive first Optional product Type

  In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite X 200-slot for flash card does not work

  Hi, I got a Toshiba Satellite X 200 23 P with Vista.
  my flash memory card slot does not work, I use an SD card that I've used a few months ago and it worked well.
  When I put the card, nothing happens.

  Help, please.
  Thank you

  You see the SD card in disk management?

  Do you have the yellow marks in Device Manager? Maybe you should also update the card reader driver. A newer version, you can find on the European site of Toshiba.

  In addition, you should test another SD card. The card is maybe defective.

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• Satellite L50 - A - 16 H - Webcam + microphone does not work

  Hello

  I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
  When I got this new laptop everything worked fine, but later it stopped working.
  I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

  I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
  I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
  and the microphone "working normally" but I when I try to call my friends can't hear me.

  I hope someone can help me with this problem, thank you very much :)

  You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
  After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
  Please test and send feedback.

  In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

• G72-B66US laptop: Hp recovery disc order page does not work.

  Order HP recovery disks page does not work. I returned including credit cards and it stops there.   I did it several times over several days. Who should I contact to order discs?

  For some strange reason, this often happens with Internet Explorer. You could try to install the Chrome browser, and try again.

  https://www.Google.com/chrome/browser/desktop/

  Or - you can use the telephone support.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?