Satellite P200-RT2 - need help with recovery

I made a Boo-Boo and need advice/help to get things fixed.

My husband has a Satellite P200-RT2 running Win XP 32 bit (included with Vista, but had been upgraded). The battery needs to be replaced, does not load and he made the mistake to disconnect while it was closing, but had not closed completely. Laptop computer would not start even in Safe Mode.

So, I thought to try to insert a disc Win XP Pro thought, he would work to restart the computer and start again. No, he took over and completely restructured the laptop. If great, now have Win XP Pro on it, but can not load all Toshiba drivers that I downloaded from the Toshiba site.

I was not in a position to know if there is a specific order to load the drivers... have been reading and wonder if the BIOS should be the first?

Needless to say that the Toshiba recovery software went on the P200-RT2, I can't find a separate drive that supposedly it contains, there are only two listed drives, drive C and D (for DVDs).

Toshiba tells me that Microsoft sells the recovery software, MS told me that Toshiba sells. There are sites online that have the recovery disc for Vista I could buy or download, but I'm not sure on those that are reliable/safe.

Have to mention that I have a Toshiba laptop latest (L675 - 40 X, Win 7) and have the recovery disc for it.

Is it possible to use these recovery disks for Toshiba software loaded on the old P200-RT2?

Any help is greatly appreciated!

If I could get the XPPro to work, which would leave as OS... but I don't know where to find the drivers.

Satellite P200 - RT2 PSPB0C is a Canadian model.
But the same model was released in Europe under the model number:E PSPB0

You will find all of the Win XP drivers on the Toshiba UE driver page:
http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

Choose:

  • Archives
  • Satellite
  • Satellite P series
  • Satellite P200 PSPB0
  • PSPB0E
  • Win XP

Tags: Toshiba

Similar Questions

  • Satellite U940 - 11b - need help with recovery files

    Madam/Sir,

    I have a question about a failure U940 - 11 c.

    The laptop crashed after be closed during recovery of windows procedures. I think that Windows is damaged, as a result, the laptop no longer starts. When turing the laptop on the following message is displayed: reboot and select proper boot device. See the image below:

    Files on the hard drive are very precious to me, so the hard drive can not be reset until I got the files. I tried to recover the boot files Ubuntu from a USB flash drive. Ubuntu began without any difficulty. The problem is that Ubuntu is not able to find the Windows hard disk. From Gparted, the following errors occurred:

    1. WARNING: / dev/sda contains the signatures of TPG, indicating that she has a GPT table. However, it doesn't have a valid fake msdos partition table, as it should. Maybe it has been altered - possibly by a program that does not include the GPT partition tables. Or maybe you deleted the table GPT and are now using a msdos partition table. It is a GPT partition table? :

    2. the GPT backup table is not at the end of the disc, as it should. This may mean another operating system to think that the drive is smaller. FIS, by moving the backup at the end (and revmoving the old backup)? :

    3. not all the space available to/dev/sdb appears to be used, van correct you the GPT to use all the space (special edition 39007920 blocks) or continue with the current configuration? :

    4. the disk is allocated:

    Do you have tips or advice that could help me get the files from the hard drive. I do not understand the errors and will not be able to solve this problem. Thanks in advance.

    Hello

    I suggest that you use the tool to disks in Ubuntu to mount your Windows partition.
    If the partition is damaged in an aborted recovery (or other reason), you will need to invest a lot of time and effort to successfully recover your data.

    Tom BR

  • Satellite C660D - 18 c - need help with recovery

    Hello

    I need help for my computer. My calculation is not started and shows "bootmrg is missing. I'm putting in recovery CD (i downloaded from Internet) when the CD starts, I get choose it to select the operating system, but it isn't here, what should I do?

    You can't expect that we comment on a few non-originales recovery image download from the internet.

    Recovery image is on a language only if you can't choose another language. Recovery images vary between countries, so if you have a recovery for UK image you must install the default language (English).

    What language is this recovery image?

  • Satellite P205D-S7802 - need help with Wi - Fi

    I have a Toshiba Satellite P205D-S7802. I had windows Vista on it, but the time has come to reformat.

    I tried to do just the recovery disk to reset it back as long as the factory, but after using the disk a discovered I do not know where disc 2 is therefore due entirely reinstal bootleg windows xp pro.
    But now I can't figure out how to get my wireless connection to connect to it. I don't even see the wireless icon or the available tab.

    Is there a driver I need to install or what?
    Thank you for your help

    Hey,.

    Normally after the installation of the Windows operating system with a Microsoft disc, you need to install all the drivers for the hardware. So do you have yellow exclamation mark in Device Manager?

    I think that you need to install the WLAN driver too. You can download all the drivers page Toshiba or Toshiba WLAN to WLAN card Portal: http://aps2.toshiba-tro.de/wlan/

  • Satellite L955-10f - need help with uninstall Win8 and install Win7

    I'm now totally fed up with the Mickey Mouse Windows 8 OS and want to return to Windows 7. I have a new laptop Toshiba Satellite L955-10f. Should I use the recovery disk to get rid of W8?

    Is there a way I can get a recovery for W7 for this machine disk in case it is needed in the future? I'm not technical, so any help will be appreciated.

    Thanks in advance.

    Right there is big problem with this machine. I ve checked the download page of Toshiba and this model is not supported for Win7, it will be difficult to find the right drivers, tools and utilities.

    This model is designed for Win7 Toshiba doesn't offer Win7 recovery disc.
    This is a rather complicated situation. The first thing you need to do should now create Win8 recovery media using the preinstalled Toshiba Recovery Disk Creator.

    I put t know what to say. Maybe you have someone with an excellent knowledge of PC and who can help you with this. Material of your machine should be compared with other models may be supported, so you will be able to use the drivers, tools and utilities available for these models.

  • Satellite M60-159 - need help with RAM

    Hello
    I have laptop M60 - 159
    Now I have inside 512 MB RAM 2Rx16 PC2-4200 s-444-12-A3 SAMSUNG
    I know that this notebook can use 2 x 1 GB
    Please someone tell me what the faster RAM, can I put?
    This? GOODRAM DDR2-667 PC2-5300 SODIMM 1 GB?
    Better or worse?

    Thank you & best regards

    Post edited by: adrian351

    The point is to use Rams compatible and not faster. If speed of the FSB 533 MHz is there is no sense to use faster RAM.
    "So we are going to discuss here on the best solution for you;).

    Compatible 1 GB of RAM for your Satellite M60 is with PA3411U-1M1G part number.

  • Satellite A200 - 24 - need help with ad - hoc connection

    Hello

    I have a Toshiba Satellite A200-24 which is connected to the internet via ADSL.

    Also, I have a laptop and I want to share internet between them in my apt.
    In Win XP it should do so through the Connection Wizard, but in vista, it is "ad hoc connection".

    However, when I try to do, I get a message that windows cannot create my new network.
    I have searched all over the net for a solution and those who have the same problem as me.

    Have computers with Satellite...

    Hello

    I think you should check this page:
    http://www.LyteByte.com/2007/02/21/how-to-share-one-Internet-connection-with-another-computer-using-Vista/

    Here you have find some information and details (screenshots) how to share one Internet connection with another computer using Vista?

    This page could also be interesting:
    http://thehiddenguide.com/how-to-share-two-computers-with-one-Internet-connection-on-Vista/

    Please post comments!

  • Satellite P850-30V - need help with update drivers

    Hello

    Tempo said there are new drivers for NVIDIA and LAN Wi - Fi. I have download extract it the files and they run, BUT the drivers have not been updated and tempo continues to tell me there are updates.

    I play diablo 3 and when I run the game it tells me that my video driver is outdated.

    Help, please

    If everything is working properly you should not install any update, especially not the driver WLAN.
    You have problems with the WIFI connection?

    With the game is a little problem. On mobile units (portable computers) display are preinstalled drivers supported by the laptop manufacturers. The game will be the latest version of the driver from the manufacturer of the graphics card but they don t support drivers for laptops... it's a little complicated.

    My advice to you: If everything works fine and you don t have serious problems disable Tempro.

  • NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

    NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

    Hi BSRC$, in stock

    1. You have security software installed on the computer?
    2. You receive an error message when you restart the computer?

    Reinstalling Windows XP to the factory setting would not be the first option.

    It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

    I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

    How to remove Windows XP Service Pack 3 from your computer

    http://support.Microsoft.com/kb/950249

    Steps to take before you install Windows XP Service Pack 3

    http://support.Microsoft.com/kb/950717

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

    I don't know why vista windows no longer charge, or when the files and folders disappeared

    How Windows Defender is on this problem?

    Follow these steps to try to solve your problems of boot.

     

     

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Need help with screen Blus of death (BSOD) on my computer toshiba laptop

    Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

    If someone could point me in the direction of a few possible ways to get this problem.

    guys do you propose I make to the store and see if they can check it out, what would I need if I did.

    I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

    im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

    -leoknighted

    PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

    Hello

    I suggest you to refer to this article to check if this help.

     

    Resolve stop (blue screen) error in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

     

    Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

     

    Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

    Let us know if you need help with this question, we will be happy to offer you our help.

  • Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

    Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

    HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

    Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

    Phoenix BIOS, hard drive test result: "Fail #1-08".

    I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

    However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

    How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
    Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

    I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
    I contacted HP to order recovery disks, but they are no longer available for my computer.

    Any suggestions would be greatly appreciated!
    Jon

    Update...

    I found a site that offers the following:

    http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

    Recovery Kit 435422-001 for HP model dv6108nr number

  • I'm suddenly needing help with my browser Firefox (6.0.2)

    Hello
    I'm suddenly needing help with my browser Firefox (6.0.2)

    (OS: I use Windows XP).

    When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

    I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

    This problem started today, September 8, 2011 and has never happened before.

    Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

    I also noticed that just before I "opened" Firefox, I now get a small box indicating:

    [JAVASCRIPT APPLICATION]
    Handl exc in Ev: TypeError: this oRoot.enable is not a function

    This never appeared before - I hope that it offers a clue has what is wrong.

    The browser not be stuck in Mode safe, said by the way.

    Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
    (A friend sends this request in my name from their pc)

    Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

    If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
    In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

    Thanks in advance.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Need help with installation on Photosmart C7280 all-in-one

    I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

    Click here to download the software for your printer:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

    has chosen the appropriate operating system that corresponds to your computer and download the full software features.

Maybe you are looking for