Satellite P200D-139: number lock keyboard & num do not work after restoring

Similar Questions

• Satellite A200 - 1 H 2 with Vista does not work after restoring

  How-dee!

  I have a laptop Satellite A200 - 1 H 2 with a Windows Vista Home System.
  Computer was never connected with the Internet and I use it only for the doc write, play music and watch movies. It worked fine up until yesterday.

  After turning on, there was a massage "c:\windows\system32\cmd.exe" corrupt (spleen? Sorry, I don't remember).

  So, I used the product Toshiba Recovery DVD and after reinstalling system reboot. And now I have a "Startup Repair" massage, which is:
  "Windows cannot repair this computer automatically" and below:
  "If you have recently attached a device to this computer, such as a camera or portable music player, remove it and then restart the computer. If you continue to see this massage, contact... blah, blah, blah. .... Click Finish to exit and turn off your computer.

  It's weird cos I have no device connected to my computer and it was during my recovery system.

  After pressing on "discovers the diagnostic and repair details" another pop-up window shows and he says, that all test "completed successfully" (the last is "Control of State Setup") and who
  "Root cause found.
  --------------------------
  Failure so that the Setup program is underway"

  What should I do now? I don't have any bootable Windows Vista DVD.

  Please heeeeelp!

  PS. Sorry for my poor English :)

  That s odd and I assume that the laptop would be correctly after reinstalling the Toshiba Recovery disk
  However, maybe that something was wrong during the first attempt

  Try using the recovery again disk and try reinstalling this cell second time

  Good luck

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Satellite P50-A-144 - FN + z key does not work after update Win8.1

  Hello
  a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
  Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

  How could I solve this problem? It's my OCD tingle.

  Thanks for all the replies :D

  Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

  I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

  You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• HP Envy laptop - 15-ae011na: HP Envy - keyboard and Trackpad not working after the mode 'sleep'.

  HP Envy laptop - 15-ae011na

  I have this laptop for only 1 week, he did various updates. I guess that's from Windows 8 to 8.1. He also completed an update of the BIOS with HP Support Assistant.

  Question: When the awakening of my laptop mode 'sleep', my trackpad and keyboard do not work, I have unlock my PC using HP Simple pass, then press the power button to restart the machine.

  Troubleshooting: I followed some advice for troubleshooting on the support page which lead me to uninstall the keyboard driver then restart my machine. I have all the latest drivers aswell.

  Someone has an idea what might be causing the problem? Ideally, I'd like to do a restore or upgrade of Windows 10 immediately.

  Thank you.

  Looks like this has been caused some my driver problem with Windows 8.1 and I guess that's with HP SimplePass such that it would not recognize the keyboard and the trackpad after waking up to use it.

  I have upgraded to Windows 10 that looks like a solved the problem.

• Satellite C55D - buttons left and right touchpad do not work after the upgrade to Windows 10

  Just what the title says. My touchpad on my C55D satellite works well, but click keys do not work. I tried everything I know how to solve this problem and can not understand. It doesn't seem to be any "Advanced settings" anywhere, as I suppose it would be where would be adjustments.

  Help, please!
  '

  Hello

  The 'old' previous touchpad (Synaptics or momentum) is installed on your laptop?
  You should check this area programs & features

  If so, uninstall this application and restart the laptop.
  Then check if the left and right click touchpad would work again.

  By the way: have you verified the functionality of a USB external mouse? It work correctly?

• Keyboard shortcuts do not work after changing the blending mode to a layer

  There is a strange bug that I experienced with photoshop. Whenever I change the blending mode to a layer (for example by selecting "Multiply" in the menu drop-down blending mode), my keyboard shortcuts stop working until I have click on the canvas again. It's annoying because often, I'll be on the Brush tool and I did draw on the canvas and press ctrl + z to re - activate keyboard shortcuts. I'm curious to know if this problem occurs to someone else and if anyone has found a solution for this.

  Version of Photoshop: 20150722r.168 x 64

  Operating system: Windows 10

  It happens on Windows, because the drop-down list with blend modes remains highlighted or active (around the blue line). You can press ENTER to confirm and delete the highest point around blend mode dropdown or use keyboard shortcuts to change the layer blending mode. To change the layer blend mode, you must have selected layer and then press Shift + Alt + letter for the blend mode. This shortcut does not work in the case where the tool you are using have mode option in the blending Options bar.

• Satellite U940: Keyboard backlight does not work after the mode 'sleep'

  I have to restart the computer when it comes out of sleep!
  One day old PC. Not happy!

  Any tips?

  FN - Z does nothing.

  Can you please tell us which model of laptop you have exactly?
  Are you using the original pre-installed OS that you got with it?

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Satellite P10: Controller USB and IEEE 1394 do not work after WXP re - install

  Does anyone know how to fix this problem?

  I recently reinstalled WXP home on my satellite p10 computer laptop and then installed all drivers and utilities from the support CD that follows with Notepad.

  Everything works except for USB and Firewire.
  Very strange screen system shows me that I have bad driver for usb controller, but when I run the utility chipset problem remains. I even downloaded the drivers on the Toshiba support home page in the hope that it would be a different version and they would work, but nada... same problem persists.

  Someone knows how to solve this problem, or what is suitable driver for the controller USB on satellite p10 554 and where can I find this driver (without the entire chipset utility?)

  Thank you in advance for your help!
  David

  Hello

  the funny thing is that USB is IN the chipset. The problem is that you can extract some drivers you need, given that utilities chipset intel are a complete set.

  So, I suggest you go to the website of intel (www.intel.com) and then download the chipset utility. Don t forget to update your windows (Service pack, updates, bugfixes) because the operating system has sometimes problems with the hardware installed, then an update will solve this...

  I hope that you have little luck with the original software of the chipset intel.
  Give a few comments after completing the makings and let us know if it worked.

  Good bye

• G560 keyboard does not work after restoring

  Hello!

  I just did a restore using the recovery disks sent to me by the customer hotline of lenovo.

  the whole process went through and now it says:

  "LENOVO PRELOAD IS COMPLETE!

  Press any Key to Shutdown! »

  the keyboard and the touchpad does not, so I can't press a key...

  My question is, do I I just stopped the laptop by pressing the power button or deals that damage the recovery?

  Thank you very much!

  it solved!

  I pressed ctr + alt + delete and then the keyboard worked again and I could press a button...

  Thanks anyway!

• Re: Satellite Pro U400 PSU41E - com wireless switch does not work after Win7

  Hello

  I did an upgrade from 32-bit Windows 7 Professional (clean install) to my SatPro this week, and almost everything is fine. I reinstalled Win7 readers listed on this site and my software with no obvious problems. I say almost because the switch for wireless on the front of the unit has stopped working.

  Previously with the switch pushed to the left of that internal map could be put off, it remains now on. The light goes out! The wireless card works OK and connect to home and office wifi networks, but I can not turn off when connected using a connection cable.

  Any thoughts on how to restore the switch function? I have looked for the readers, but cannot identify all.

  Thank you
  Spencer

  Hello

  Once, I had this problem on my A500. I pressed Fn + F8 to disable wifi and switch pushed to the left, in any case just to play with it. In my case, it helped me.

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.