Satellite P205-S6337 - blue screen and the black screen with the display driver

Similar Questions

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• Satellite M60 and the display driver installation

  Help people to the display driver "installation cannot continue because the size of the specified directory path and the name of the installation folder exceeds 88 characters.
  Shorten one or both of the limit specified below and try again"! that to me?

  Hello!

  This looks like your username to long and the path of files extracted more than 88 characters.
  I think you should change your username or try with another account to update the driver, for example the admin account.

  If it doesn't work try to download the driver again.

  I hope this works, but you can give us feedback, what's going on.

  Good bye

• T61 Power Management blue screens because of display driver

  I recently move my T61 from Win XP to Win 7 32 bit.  I've got intel onboard video card.  After installing Windows, I went to the page of the Lenovo driver and installed 32-bit drivers.  Now when I pull the power cord from the power supply to battery, my T61 flashes the time screen 5 or 6 and then blue screens.  Just before the blue projection, there is a popup in the system tray that the display driver stopped responding.

  The problem doesn't show up if I stay in battery mode, nor does it when I plug in the AC power.  Its just goes the power supply battery but its pretty consistent.  Any help would be greatly appreciated.

  Think I have this problem. Uninstalled the display drivers intel and lenovo and restarted. Then let win 7 update find new display driver from the windows update server. Screen flashing when switching between profiles of power now and don't has no blue screened in 3 days... fingers crossed...

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

  Hello

  I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

  I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

  Thank you

  Amira.

  2 months old?

  It is under warranty.

  Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A500-19N - blue screen with error jmcr.sys

  Dear team of Toshiba

  I have huge problems with my Satellite A500-19N. Since I bought him, I had several blue screens. Sometimes 5 times a day. Whenever the blue screen displays this error: JMCR. SYS

  I'm not a specialist of the it, so I need your support. All the drivers are up to date!

  concerning

  How can attach some files as files dmp with the details of the blue screen?

  Hi DV1510,

  The same question has been asked here already:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51185

  It seems that this is caused by a driver and you need to update all the. Please begin with the first card reader driver.
  Everything you download from the Toshiba site.

  In addition it is not easy to say something, if you post any information on the Windows version

• Satellite M70-151 - how to upgrade the display driver?

  Hello

  as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

  I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
  After installation, I learned that he had to go on the manufacturer's site to get my drivers

  So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
  Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

  Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

  So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

  Thanks for your help

  / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

  ---------------
  Display devices
  ---------------
  Card name: ATI MOBILITY RADEON X 700 graphics card
  Manufacturer: ATI Technologies Inc.
  Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
  Display memory: 256,0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: (Standardmonitor)
  Monitor Max RES:
  Driver name: ati2dvag.dll
  Driver version: 6.14.0010.6587 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: Non applicable
  Mini VDD: ati2mtag.sys
  Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
  The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0 x 5653
  SubSys ID: 0xFF021179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel: ModeMPEG2_C ModeMPEG2_D
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  Post edited by: Sarahbella

  Hi Sarahbella,

  You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

  Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

  Download the driver and run the setup.exe file.

  Check this box!

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• Satellite A80 PSA80E - where to find the display driver?

  Hello!

  I can't find a job see drivers in my laptop vor!
  In the download section of the pilot is even not kategory A80 more?

  can sb help me pls?

  Hi mate

  Of course, the category Satellite A80 is available.
  The A80 is a bit older and therefore Sat A80 drivers have been moved to archive.

  In the upload form, choose Archive-> A Satellite-> Satellite A80
  There should be a driver you need.

  See you soon

• Re: Satellite L300-129 - where to download the display driver?

  I want to reinstall Vista (because I have so much...). And before you start, I began the research for my new/old operating system drivers. I mark for my first driver, graphics driver. good. I'm going to the Intel site and ran "Detector pilot" and look what I saw.

  http://img255.imageshack.us/img255/6370/beztytuuev.PNG

  And then I went to the Toshiba Support. I spent the time to find where I can download the driver-_-. Too bad.
  And I want to go to my model annd... I can not find my driver. (. It is very important for me.

  http://img101.imageshack.us/img101/2764/beztytuuym.jpg

  Hello

  Try this driver for Windows Vista 32-bit:

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080416133556.zip

  or Windows Vista 64-bit: (actually for windows 7, but it should work)

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20091027142619.zip

  Post edited by: jeka-Israel

• Satellite Pro A100 (PSAA3) - Cannot install the display driver because of the length of the specified directory path

  Downloaded, extracted and I tried to install it, (installed before but had to reboot the computer)

  Error message
  "SETUP cannot continue because the length of the greater of the specified directory, the name of the installation folder path exceeds 88 characters.

  "Please shorten one or both of the limit specified below, and then try again"

  What should I do?

  and cheers in advance!

  The problem is that your unzipped folder name is too long!
  You need to rename the folder. Take a shorter name!

• Satellite L500-1XL - does boot and the screen stays black

  Hello

  I have a Satellite L500-1XL, when I turn it on the fan and lights and the hard drive light blinks several times then nothing, he's not going to the Toshiba screen remains black screen, tried ext monitor but still nothing.

  The fan always runs very quietly and the hard drive is running in, I put the hard drive in an another L500 and it is very good and can be accessed without problem, it has only 1 stick of 2 GB of RAM DDR3 and the other L500 I is DDR2 so I can't try to change the RAM. If I remove the ram should it beep or does only desktop computers do this? Mine does nothing when it is removed.

  Any help would be very useful, thank you!

  Hi gazzdowzell,

  If your laptop doesn t boot it seems to be a hardware bad working it could be everything, motherboard, BIOS, CPU, etc and it is difficult to say what exactly is the problem.

  First of all, I would like to try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work, please contact a service provider authorized in your country. If your laptop is under warranty, repairs are free.
  In addition if you remove the RAM and the beep of t n for laptop, it seems to be another problem. If you have removed the RAM module would be defective, the computer would have a beep.

  Good luck!

• Satellite L300-1DN - blue screen and STOP 0 x 00008086

  Dear users of Toshiba

  I use Vista Service Pack 2, 32-bit on Satelite L300-1DN. My laptop does not start.

  I get a blue screen with a message at the end STOP: 0 x 00008086

  I tried F8 and Mode without failure and also the F8 and repair, but after I started downloading files is is stuck at "crcdisk.sys" or after obtaining the flashing green Co bar of Microsoft I get a black screen with a white pointer and then crashes and gives the same blue screen.

  Any help will be greatly appreciated.

  Best regards

  Joe

  Find the other thread you have created some time ago:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=251690
  Seems that you had a few problems with the OS in the past
  Have you tried to recover the laptop using the Toshiba disk?

  Maybe it was material nuisance
  Check the RAM and HARD drive.
  HARD drive can be verified using free software called Drive Fitness Test.

  The RAM modules could be removed separately and you can try to run Notepad using a module in each slot
  Maybe this help or new modules must be used

  Of course, it would be possible that the RAM is ok and the problem is related to the serious fault of motherboard

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R